Adhesion to a CAD/CAM Composite: Causal Factors for a Reliable Long-Term Bond
Source abstract
Abstract
Computer aided design/manufacturing (CAD/CAM) technology has become an increasingly popular part of dentistry, which today also includes CAD/CAM resin-based composite (RBC) applications. Because CAD/CAM RBCs are much more difficult to bond, many methods and attachment materials are still being proposed, while the best application method is still a matter of debate. The present study therefore evaluates causal factors for a reliable long-term bond, which includes the surface preparation of the CAD/CAM RBC, aging and the type of luting material. The reliability of the bond was calculated, and supplemented by fractography to identify fracture mechanisms. Five categories of luting materials were used: (1) temporary zinc phosphate cement, (2) glass ionomer cement (GIC), (3) resin-modified GIC, (4) conventional adhesive resin cement (ARC), and (5) self-adhesive RC. Half of the CAD/CAM RBC surfaces (n = 200) were sandblasted (SB) with 50 µm aluminum oxide, while the other half remained untreated. Bond strength measurements of the 400 resulting specimens were carried out after 24 h (n = 200) or after additional aging (10,000 thermo-cycles between 5 and 55 °C) (n = 200). The data were statistically analyzed using one- and three-way ANOVA followed by Games-Howell post-hoc test (α = 0.05) and Weibull analysis. Aging resulted in a significant decrease in bond strength primarily for the conventional cements. The highest bond strengths and reliabilities were recorded for both ARCs. SB caused a significant increase in bond strength for most luting materials, but also caused microcracks in the CAD/CAM RBC. These microcracks might compromise the long-term reliability of the bond in vivo.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Atmospheric aerosols and clouds · Atmospheric chemistry and aerosols · Atmospheric Ozone and Climate
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Conservative Dentistry and Periodontology, University Hospital, Ludwig Maximilians University (LMU), 80336 Munich, Germany
References (36)
Show source-provided references
1. Bonding effectiveness of luting composites to different CAD/CAM materials
2. Bonding to new CAD/CAM resin composites: Influence of air abrasion and conditioning agents as pretreatment strategy10.1007/s00784-018-2461-7 ↗
3. Resin composite blocks via high-pressure high-temperature polymerization10.1016/j.dental.2011.12.003 ↗
4. Resin-composite Blocks for Dental CAD/CAM Applications10.1177/0022034514553976 ↗
5. A clinically focused discussion of luting materials10.1111/j.1834-7819.2010.01297.x ↗
6. Bonding to CAD-CAM Composites: An Interfacial Fracture Toughness Approach10.1177/0022034517728714 ↗
7. Effects of alumina airborne-particle abrasion on the surface properties of CAD/CAM composites and bond strength to resin cement10.4012/dmj.2020-023 ↗
8. Grinding damage assessment for CAD-CAM restorative materials10.1016/j.dental.2016.12.004 ↗
9. Effect of grinding and polishing on the roughness and fracture resistance of cemented CAD-CAM monolithic materials submitted to mechanical aging10.1016/j.prosdent.2019.02.012 ↗
10. Sandblasting may damage the surface of composite CAD–CAM blocks10.1016/j.dental.2016.12.003 ↗
11. Shear bond strength vs interfacial fracture toughness—Adherence to CAD/CAM blocks10.1016/j.dental.2019.10.003 ↗
12. Effectiveness of current adhesive systems when bonding to CAD/CAM indirect resin materials: A review of 32 publications10.1016/j.jdsr.2018.10.001 ↗
13. A Review of Luting Agents10.1155/2012/752861 ↗
14. O’Brien, W.J. (2002). Dental Materials and Their Selection, Quintessence Publishing. [3rd ed.].
15. Cements Part I: Theoretical Considerations10.1111/j.1708-8240.1995.tb00562.x ↗
16. Sidhu, S.K., and Nicholson, J.W. (2016). A review of glass-ionomer cements for clinical dentistry. J. Funct. Biomater., 7.10.3390/jfb7030016 ↗
17. Ilie, N. (2021). Comparative Analysis of Static and Viscoelastic Mechanical Behavior of Different Luting Material Categories after Aging. Materials, 14.10.3390/ma14061452 ↗
18. Long-term adhesion and mechanism of bonding of a paste-liquid resin-modified glass-ionomer10.1016/j.dental.2008.09.008 ↗
19. Dental Cements for Definitive Luting: A Review and Practical Clinical Considerations10.1016/j.cden.2007.04.002 ↗
20. Direct comparison of the bond strength results of the different test methods: A critical literature review10.1016/j.dental.2009.12.002 ↗
21. Effects of Finger Pressure Applied by Dentists during Cementation of All-Ceramic Crowns10.1055/s-0039-1697857 ↗
22. A statistical distribution function of wide applicability10.1115/1.4010337 ↗
23. Why do Shear Bond Tests Pull Out Dentin?10.1177/00220345970760061001 ↗
24. The effect of airborne-particle abrasion on the shear bond strength of four restorative materials to enamel and dentin10.1016/j.prosdent.2004.05.007 ↗
25. Resin-modified glass ionomer cements: Bonding to enamel and dentin10.1016/S0109-5641(96)80015-7 ↗
26. Self-adhesive resin cements—Chemistry, properties and clinical considerations10.1111/j.1365-2842.2010.02148.x ↗
27. Silane adhesion mechanism in dental applications and surface treatments: A review10.1016/j.dental.2017.09.002 ↗
28. Underhill, P.R., and Duquesnay, D.L. (2020). Corrosion resistance imparted to aluminum by silane coupling agents. Silanes and Other Coupling Agents, CRC Press.10.1201/9780429070426-12 ↗
29. Effect of surface treatment of CAD/CAM resin composites on the shear bond strength of self-adhesive resin cement10.4012/dmj.2019-431 ↗
30. Thermal cycling procedures for laboratory testing of dental restorations10.1016/S0300-5712(98)00037-2 ↗
31. Bonding effectiveness to different chemically pre-treated dental zirconia10.1007/s00784-013-1152-7 ↗
32. Filler leachability of composites stored in distilled water or artificial saliva10.1177/00220345960750091201 ↗
33. Bond strength durability of different adhesives to dentin after aging in two different solutions
34. Macro-, micro- and nano-mechanical investigations on silorane and methacrylate-based composites10.1016/j.dental.2009.02.005 ↗
35. Evaluation of a conventional glass ionomer cement with new zinc formulation: Effect of coating, aging and storage agents10.1007/s00784-012-0733-1 ↗
36. Fractographic failure analysis of a Procera® AllCeram crown using stereo and scanning electron microscopy10.1016/j.dental.2008.01.002 ↗