journal article·2022-06-14Open access

Osteoconductive Silk Fibroin Binders for Bone Repair in Alveolar Cleft Palate: Fabrication, Structure, Properties, and In Vitro Testing

Supaporn Sangkert, Kantida Juncheed, Jirut Meesane

Abstract

Osteoconductive silk fibroin (SF) binders were fabricated for the bone repair of an alveolar cleft defect. Binders were prefigureared by mixing different ratios of a mixture of random coils and SF aggregation with SF fibrils: 100:0 (SFB100), 75:25 (SFB75), 50:50 (SFB50), 25:75 (SFB25), and 0:100 (SFB0). The gelation, molecular organization, structures, topography, and morphology of the binders were characterized and observed. Their physical, mechanical, and biological properties were tested. The SF binders showed gelation via self-assembly of SF aggregation and fibrillation. SFB75, SFB50, and SFB25 had molecular formation via the amide groups and showed more structural stability than SFB100. The morphology of SFB0 demonstrated the largest pore size. SFB0 showed a lowest hydrophilicity. SFB100 showed the highest SF release. SFB25 had the highest maximum load. SFB50 exhibited the lowest elongation at break. Binders with SF fibrils showed more cell viability and higher cell proliferation, ALP activity, calcium deposition, and protein synthesis than without SF fibrils. Finally, the results were deduced: SFB25 demonstrated suitable performance that is promising for the bone repair of an alveolar cleft defect.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Silk-based biomaterials and applications · Periodontal Regeneration and Treatments · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Biomedical Engineering, Faculty of Medicine, Prince of Songkla University, Hat Yai 90110, Songkhla, Thailand

References (67)

Show source-provided references
1. 3D Printing of Bone Grafts for Cleft Alveolar Osteoplasty—In vivo Evaluation in a Preclinical Model10.3389/fbioe.2020.00217 ↗
2. Evaluation of the Different Biomaterials Used in Alveolar Cleft Defects in Children10.4103/ams.ams_140_17 ↗
3. Grasso, G., Mummolo, S., Bernardi, S., Pietropaoli, D., D’Ambrosio, G., Iezzi, G., Piattelli, A., Bianchi, S., and Marchetti, E. (2020). Histological and Histomorphometric Evaluation of New Bone Formation after Maxillary Sinus Augmentation with Two Different Osteoconductive Materials: A Randomized, Parallel, Double-Blind Clinical Trial. Materials, 13.10.3390/ma13235520 ↗
4. Cheah, C.W., Al-Namnam, N.M., Lau, M.N., Lim, G.S., Raman, R., Fairbairn, P., and Ngeow, W.C. (2021). Synthetic Material for Bone, Periodontal, and Dental Tissue Regeneration: Where Are We Now, and Where Are We Heading Next?. Materials, 14.10.3390/ma14206123 ↗
5. Bone grafting materials in dentoalveolar reconstruction: A comprehensive review10.1016/j.jdsr.2018.09.003 ↗
6. Bone grafts and biomaterials substitutes for bone defect repair: A review
7. Biomaterials for craniofacial reconstruction
8. Metals used in maxillofacial surgery10.11138/orl/2016.9.1S.107 ↗
9. Natural Polymeric Scaffolds in Bone Regeneration10.3389/fbioe.2020.00474 ↗
10. Current Methods for the Treatment of Alveolar Cleft10.5999/aps.2017.44.3.188 ↗
11. The use of hydroxyapatite bone substitute grafting for alveolar ridge preservation, sinus augmentation, and periodontal bone defect: A systematic review10.1016/j.heliyon.2018.e00884 ↗
12. Calcium phosphate cements for bone engineering and their biological properties10.1038/boneres.2017.56 ↗
13. Bioactive calcium phosphate materials and applications in bone regeneration10.1186/s40824-018-0149-3 ↗
14. Collagen-Hydroxyapatite Composites for Hard Tissue Repair10.22203/eCM.v011a06 ↗
15. Wang, Y., Wang, K., Li, X., Wei, Q., Chai, W., Wang, S., Che, Y., Lu, T., and Zhang, B. (2017). 3D fabrication and characterization of phosphoric acid scaffold with a HA/β-TCP weight ratio of 60:40 for bone tissue engineering applications. PLoS ONE, 12.10.1371/journal.pone.0174870 ↗
16. Strategy for Controlling the Properties of Bioactive Poly-EtherEther-Ketone/Hydroxyapatite Composites for Bone Tissue Engineering Scaffolds10.1021/acsomega.9b02572 ↗
17. Bone regeneration using composite non-demineralized xenogenic dentin with beta-tricalcium phosphate in experimental alveolar cleft repair in a rabbit model10.1186/s12967-017-1369-3 ↗
18. Calcium sulfate carboxymethylcellulose bone graft binder: Histologic and morphometric evaluation in a critical size defect10.1002/jbm.b.30815 ↗
19. Preservation of Posterior Mandibular Extraction Site with Allogeneic Demineralized, Freeze-Dried Bone Matrix and Calcium Sulphate Graft Binder before Eventual Implant Placement: A Case Series
20. Biosilicated collagen/β-tricalcium phosphate composites as a BMP-2-delivering bone-graft substitute for accelerated craniofacial bone regeneration10.1186/s40824-021-00214-w ↗
21. Engineered mussel bioglue as a functional osteoinductive binder for grafting of bone substitute particles to accelerate in vivo bone regeneration10.1039/C4TB01197J ↗
22. Biphasic scaffolds of silk fibroin film affixed to silk fibroin/chitosan sponge based on surgical design for cartilage defect in osteoarthritis10.1016/j.matdes.2018.01.006 ↗
23. Layer-by-layer self-assembled films of silk fibroin/collagen/poly(diallyldimethyl ammonium chloride) as nucleating surface for osseointegration to design coated dental implant materials10.1016/j.matdes.2018.10.041 ↗
24. Silk fibroin as biomaterial for bone tissue engineering10.1016/j.actbio.2015.09.005 ↗
25. Silk scaffolds in bone tissue engineering: An overview10.1016/j.actbio.2017.09.027 ↗
26. Silk fibroin/hydroxyapatite scaffold: A highly compatible material for bone regeneration10.1080/14686996.2020.1748520 ↗
27. Mimicked Periosteum Layer Based on Deposited Particle Silk Fibroin Membrane for Osteogenesis and Guided Bone Regeneration in Alveolar Cleft Surgery: Formation and in Vitro Testing10.1080/15476278.2021.1991743 ↗
28. Bone Regeneration using Silk Hydroxyapatite Hybrid Composite in a Rat Alveolar Defect Model10.7150/ijms.21787 ↗
29. The interplay between silk fibroin’s structure and its adhesive Properties10.1021/acsbiomaterials.8b00544 ↗
30. Functional silk fibroin hydrogels: Preparation, properties and applications10.1039/D0TB02099K ↗
31. A silk fibroin hydrogel with reversible sol–gel transition
32. Design and function of biomimetic multilayer water purification membranes10.1126/sciadv.1601939 ↗
33. Templated dewetting for self-assembled ultra-low-loss chalcogenide integrated photonics10.1364/OME.443648 ↗
34. Gonzalez, J.S., Mijangos, C., and Hernandez, R. (2019). Polysaccharide Coating of Gelatin Gels for Controlled BSA Release. Polymers, 11.10.3390/polym11040702 ↗
35. Comparative studies on osteogenic potential of micro- and nanofibre scaffolds prepared by electrospinning of poly(ε-caprolactone)10.1186/2194-0517-2-13 ↗
36. Polymer anion selective membranes for electrolytic splitting of water. Part I: Stability of ion-exchange groups and impact of the polymer binder10.1007/s10800-011-0309-9 ↗
37. Fabrication and Biocompatibility of Electrospun Silk Biocomposites10.3390/membranes1040275 ↗
38. The effect of protein backbone hydration on the amide vibrations in Raman and Raman optical activity spectra10.1039/C8CP06423G ↗
39. Sadat, A., and Joye, I.J. (2020). Peak Fitting Applied to Fourier Transform Infrared and Raman Spectroscopic Analysis of Proteins. Appl. Sci., 10.10.3390/app10175918 ↗
40. Balan, V., Mihai, C.T., Cojocaru, F.D., Uritu, C.M., Dodi, G., Botezat, D., and Gardikiotis, I. (2019). Vibrational Spectroscopy Fingerprinting in Medicine: From Molecular to Clinical Practice. Materials, 12.10.3390/ma12182884 ↗
41. Preparation and characterization of silk fibroin as a biomaterial with potential for drug delivery10.1186/1479-5876-10-117 ↗
42. FTIR and WAXD study of regenerated silk fibroin10.4028/www.scientific.net/AMR.677.211 ↗
43. Liu, Q., Wang, F., Gu, Z., Ma, Q., and Hu, X. (2018). Exploring the Structural Transformation Mechanism of Chinese and Thailand Silk Fibroin Fibers and Formic-Acid Fabricated Silk Films. Int. J. Mol. Sci., 19.10.3390/ijms19113309 ↗
44. Morphology and thermal stability of silk fibroin/starch blended microparticles10.3144/expresspolymlett.2010.94 ↗
45. Bioactive hierarchical silk fibers created by bioinspired self-assembly10.1038/s41467-021-22673-4 ↗
46. A Three-Stage Kinetic Model of Amyloid Fibrillation10.1529/biophysj.106.098608 ↗
47. Fibrin Formation, Structure and Properties10.1007/978-3-319-49674-0_13 ↗
48. A review of hydrogel-based composites for biomedical applications: Enhancement of hydrogel properties by addition of rigid inorganic fillers10.1007/s10853-015-9382-5 ↗
49. Porous Scaffold Design for Additive Manufacturing in Orthopedics: A Review10.3389/fbioe.2020.00609 ↗
50. The collagen family members as cell adhesion proteins10.1002/bies.20636 ↗
51. Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size10.1089/ten.teb.2012.0437 ↗
52. Modulation of cell adhesion, proliferation and differentiation on materials designed for body implants10.1016/j.biotechadv.2011.06.004 ↗
53. Towards an in vitro model mimicking the foreign body response: Tailoring the surface properties of biomaterials to modulate extracellular matrix10.1038/srep06325 ↗
54. The Impact of Contact Angle on the Biocompatibility of Biomaterials. Optom10.1097/OPX.0b013e3181da863e ↗
55. Mediation of Biomaterial–Cell Interactions by Adsorbed Proteins: A Review10.1089/ten.2005.11.1 ↗
56. Functional polymer surfaces for controlling cell behaviors10.1016/j.mattod.2017.07.002 ↗
57. Sonication-Induced Gelation of Silk Fibroin for Cell Encapsulation10.1016/j.biomaterials.2007.11.003 ↗
58. Recent progress of reinforcement materials: A comprehensive overview of composite materials10.1016/j.jmrt.2019.09.068 ↗
59. Matrix materials used in composites: A comprehensive study10.1016/j.matpr.2019.11.086 ↗
60. The Effect of Reinforcement Ratio on the Composite Structure and Mechanical Properties in Al-MgO Composites Produced by the Melt Stirring Method
61. Rajak, D.K., Pagar, D.D., Menezes, P.L., and Linul, E. (2019). Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications. Polymers, 11.10.3390/polym11101667 ↗
62. The effect of scaffold pore size in cartilage tissue engineering
63. Reconsidering Osteoconduction in the Era of Additive Manufacturing10.1089/ten.teb.2019.0047 ↗
64. An overview on autologous fibrin glue in bone tissue engineering of maxillofacial surgery10.4103/1735-3327.205789 ↗
65. Adhesive Use in Oral and Maxillofacial Surgery10.1016/j.coms.2009.10.008 ↗
66. A tissue adhesives evaluated in vitro and in vivo analysis10.1002/jbm.a.32788 ↗
67. A review of fibrin and fibrin composites for bone tissue engineering10.2147/IJN.S124671 ↗