journal article·2023-03-28Open access

Topographical and Optical Characteristics of Thermoplastic Dental Appliances Materials Related to Water Sorption

Liliana Porojan, Flavia Roxana Toma, Mihaela Ionela Bîrdeanu, Roxana Diana Vasiliu, Anamaria Matichescu

Abstract

Clear thermoplastic materials have increased in popularity in the dental field due to their various applications, combination of excellent aesthetics, and good biomechanical behavior, but they may be influenced by different environmental conditions. The purpose of the present study was to assess the topographical and optical characteristics of thermoplastic dental appliances materials relative to water sorption. PET-G polyester thermoplastic materials were evaluated in this study. Related to water uptake and desiccation stages, surface roughness was analyzed, and three-dimensional AFM profiles were generated for nano-roughness measurements. Optical CIE L*a*b* coordinates were recorded and parameters like translucency (TP), contrast ratio for the opacity (CR), and opalescence (OP) were derived. Levels of color changes were achieved. Statistical analyses were performed. Water uptake significantly increases the specific weight of the materials, and after desiccation, the mass decreases. Roughness increased after water immersion as well. Regression coefficients indicated a positive correlation between TP and a* and between OP and b*. Studied PET-G materials have a different behavior to water exposure, but for all their specific weight, they increased significantly within the first 12 h. It is accompanied by an increase in the roughness values, even if they continue to be kept below the critical mean surface roughness. On nano-level, 3D images show an increase in inhomogeneity in the network structure of particles. Slight color changes were registered.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Orthodontics and Dentofacial Orthopedics · Dental Erosion and Treatment

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Dental Prostheses Technology (Dental Technology), Center for Advanced Technologies in Dental Prosthodontics, Faculty of Dental Medicine, Victor Babes University of Medicine and Pharmacy Timisoara, Eftimie Murgu Square No. 2, 300041 Timisoara, Romania

National Institute for Research and Development in Electrochemistry and Condensed Matter, A. Păunescu Podeanu Str. No. 144, 300569 Timisoara, Romania

Department of Preventive, Community Dentistry and Oral Health, Center for Advanced Technologies in Dental Prosthodontics, Faculty of Dental Medicine, Victor Babes University of Medicine and Pharmacy Timisoara, Eftimie Murgu Square No. 2, 300041 Timisoara, Romania

References (34)

Show source-provided references
1. Mechanical Behavior of PET-G Tooth Aligners Under Cyclic Loading10.3389/fmats.2020.00104 ↗
2. Dynamic stress relaxation of orthodontic thermoplastic materials in a simulated oral environment10.4012/dmj.2013-131 ↗
3. Effects of various cleaning agents on polypropylene and copolyester thermoplastic orthodontic retainer materials
4. Daniele, V., Macera, L., Taglieri, G., Di Giambattista, A., Spagnoli, G., Massaria, A., Messori, M., Quagliarini, E., Chiappini, G., and Campanella, V. (2020). Thermoplastic disks used for commercial orthodontic aligners: Complete physicochemical and mechanical characterization. Materials, 13.10.3390/ma13102386 ↗
5. Thermal and mechanical characterization of thermoplastic orthodontic aligners discs after molding process10.1016/j.jmbbm.2021.104991 ↗
6. Clinical performances and biological features of clear aligners materials in orthodontics10.3389/fmats.2022.819121 ↗
7. Cond’o, R., Mampieri, G., Giancotti, A., Cerroni, L., Pasquantonio, G., Divizia, A., Convertino, A., Mecheri, B., and Maiolo, L. (2021). SEM Characterization and ageing analysis on two generations of Invisible aligners. BMC Oral Health, 21.10.1186/s12903-021-01676-z ↗
8. Thermal, rheological and mechanical properties of PETG/rPETG blends10.1007/s10924-019-01544-6 ↗
9. Hassan, M.H., Omar, A.M., Daskalakis, E., Hou, Y., Huang, B., Strashnov, I., Grieve, B.D., and Bártolo, P. (2020). The potential of polyethylene terephthalate glycol as biomaterial for bone tissue engineering. Polymers, 12.10.3390/polym12123045 ↗
10. Advances in orthodontic clear aligner materials10.1016/j.bioactmat.2022.10.006 ↗
11. Effect of Dental Thermoplastic Materials on the Clinical Effectiveness of Clear Aligner
12. The mechanical properties of dental thermoplastic materials in a simulated intraoral environment10.1016/j.odw.2006.03.003 ↗
13. Colorimetric and spectrophotometric measurements of orthodontic thermoplastic aligners exposed to various staining10.1186/s13005-020-00218-2 ↗
14. Color stability of three types of orthodontic clear aligners exposed to staining agents10.1038/ijos.2016.25 ↗
15. Mechanical properties of two generations of teeth aligners: Change analysis during oral permanence10.4012/dmj.2017-323 ↗
16. Effect of aging procedures on the molecular, biochemical, morphological, and mechanical properties of vacuum-formed retainers10.1016/j.jmbbm.2015.07.026 ↗
17. A new type of clear orthodontic retainer incorporating multi-layer hybrid materials10.4041/kjod.2015.45.5.268 ↗
18. Periodontal health during orthodontic treatment with clear aligners and fixed appliances: A metaanalysis10.1016/j.adaj.2018.04.010 ↗
19. Influence of constant strain on the elasticity of thermoplastic orthodontic materials10.4012/dmj.2019-104 ↗
20. In vitro spectrophotometric evaluation of Vivera clear thermoplastic retainer discolouration
21. Porojan, L., Vasiliu, R.D., Porojan, S.D., and Bîrdeanu, M.I. (2020). Surface Quality Evaluation of Removable Thermoplastic Dental Appliances Related to Staining Beverages and Cleaning Agents. Polymers, 12.10.3390/polym12081736 ↗
22. Effects of thermoforming on the physical and mechanical properties of thermoplastic materials for transparent orthodontic aligners10.4041/kjod.2018.48.5.316 ↗
23. Optical and Mechanical Properties of Newly Developed Multilayer Zirconia10.1111/jopr.12730 ↗
24. Validation of two clinical color measuring instruments for use in dental research10.1016/j.jdent.2022.104223 ↗
25. Toma, F.R., Porojan, S.D., Vasiliu, R.D., and Porojan, L. (2023). The Effect of Polishing, Glazing, and Aging on Optical Characteristics of Multi-Layered Dental Zirconia with Different Degrees of Translucency. J. Funct. Biomater., 14.10.3390/jfb14020068 ↗
26. Evaluation of flexural strength and color stability of different denture base materials including flexible material after using different denture cleansers10.4103/0972-4052.164908 ↗
27. Impact of aging conditions on mechanical properties of thermoplastic polyurethane10.1016/j.matdes.2010.04.023 ↗
28. Investigations on hygrothermal aging of thermoplastic polyurethane material10.1016/j.matdes.2009.05.038 ↗
29. Quantification of water diffusion in CMP pad polymers and impact on mechanical properties
30. Effect of humidity on the indentation hardness and flexural fatigue behavior of polyamide 6 nanocomposite10.1016/j.msea.2010.01.070 ↗
31. Preparation and characterization of thermoplastic materials for invisible orthodontic10.4012/dmj.2011-120 ↗
32. A procedure for the computational investigation of stress-relaxation phenomena10.1007/s11043-013-9209-1 ↗
33. How roughness emerges on natural and engineered surfaces10.1557/s43577-022-00469-1 ↗
34. Effect of Aging on Stained Monolithic Resin-Ceramic CAD/CAM Materials: Quantitative and Qualitative Analysis of Surface Roughness10.1111/jopr.12949 ↗