journal article·2022-10-13Open access

FeMn with Phases of a Degradable Ag Alloy for Residue-Free and Adapted Bioresorbability

Jan Tobias Krüger, Kay-Peter Hoyer, Jingyuan Huang, Viviane Filor, Rafael Hernan Mateus-Vargas, Hilke Oltmanns, Jessica Meißner, Guido Grundmeier, Mirko Schaper

Abstract

The development of bioresorbable materials for temporary implantation enables progress in medical technology. Iron (Fe)-based degradable materials are biocompatible and exhibit good mechanical properties, but their degradation rate is low. Aside from alloying with Manganese (Mn), the creation of phases with high electrochemical potential such as silver (Ag) phases to cause the anodic dissolution of FeMn is promising. However, to enable residue-free dissolution, the Ag needs to be modified. This concern is addressed, as FeMn modified with a degradable Ag-Calcium-Lanthanum (AgCaLa) alloy is investigated. The electrochemical properties and the degradation behavior are determined via a static immersion test. The local differences in electrochemical potential increase the degradation rate (low pH values), and the formation of gaps around the Ag phases (neutral pH values) demonstrates the benefit of the strategy. Nevertheless, the formation of corrosion-inhibiting layers avoids an increased degradation rate under a neutral pH value. The complete bioresorption of the material is possible since the phases of the degradable AgCaLa alloy dissolve after the FeMn matrix. Cell viability tests reveal biocompatibility, and the antibacterial activity of the degradation supernatant is observed. Thus, FeMn modified with degradable AgCaLa phases is promising as a bioresorbable material if corrosion-inhibiting layers can be diminished.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Magnesium Alloys: Properties and Applications · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials Science, Paderborn University, Mersinweg 7, 33100 Paderborn, Germany

DMRC-Direct Manufacturing Research Center, Paderborn University, Mersinweg 3, 33100 Paderborn, Germany

Technical and Macromolecular Chemistry, Paderborn University, Warburger Str. 100, 33098 Paderborn, Germany

Department of Veterinary Medicine, Institute of Pharmacology and Toxicology, Freie Universität Berlin, Koserstr. 20, 14195 Berlin, Germany

Department of Pharmacology, Toxicology and Pharmacy, University of Veterinary Medicine Hannover, Foundation, Buenteweg 17, 30559 Hannover, Germany

Funding

German Research Foundation (DFG)

References (81)

Show source-provided references
1. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
2. Zivic, F., Affatato, S., Trajanovic, M., Schnabelrauch, M., Grujovic, N., and Choy, K.L. (2018). Biomaterials in Clinical Practice, Springer.10.1007/978-3-319-68025-5 ↗
3. Challenges and Opportunities in the Selective Laser Melting of Biodegradable Metals for Load-Bearing Bone Scaffold Applications10.1007/s11661-020-05796-z ↗
4. Ratner, B.D., Hoffman, A.S., Schoen, F.J., and Lemons, J.E. (2013). Biomaterials Science, Academic Press. [3rd ed.].
5. Bacterial adherence and biofilm formation on medical implants: A review10.1177/0954411914556137 ↗
6. Development of Biomedical Implants through Additive Manufacturing: A Review10.1007/s11665-021-05578-7 ↗
7. Prakasam, M., Locs, J., Salma-Ancane, K., Loca, D., Largeteau, A., and Berzina-Cimdina, L. (2017). Biodegradable Materials and Metallic Implants—A Review. J. Funct. Biomater., 8.10.3390/jfb8040044 ↗
8. Bone tissue engineering techniques, advances and scaffolds for treatment of bone defects10.1016/j.cobme.2020.100248 ↗
9. Antibacterial metals and alloys for potential biomedical implants
10. Updates on the research and development of absorbable metals for biomedical applications10.1007/s40204-018-0091-4 ↗
11. Redlich, C., Schauer, A., Scheibler, J., Poehle, G., Barthel, P., Maennel, A., Adams, V., Weissgaerber, T., Linke, A., and Quadbeck, P. (2021). In Vitro Degradation Behavior and Biocompatibility of Bioresorbable Molybdenum. Metals, 11.10.3390/met11050761 ↗
12. Exploring the Role of Manganese on the Microstructure, Mechanical Properties, Biodegradability, and Biocompatibility of Porous Iron-Based Scaffolds10.1021/acsbiomaterials.8b01497 ↗
13. Effects of multiscale porosity and pore interconnectivity on in vitro and in vivo degradation and biocompatibility of Fe–Mn–Cu scaffolds10.1039/D1TB00641J ↗
14. Biodegradation behaviour of Fe-based alloys in Hanks’ Balanced Salt Solutions: Part I. material characterisation and corrosion testing
15. Review on iron and its importance for human health
16. Long-term in vivo corrosion behavior, biocompatibility and bioresorption mechanism of a bioresorbable nitrided iron scaffold10.1016/j.actbio.2017.03.020 ↗
17. Dietary reference intakes for energy, carbohydrate, fiber, fat, fatty acids, cholesterol, protein and amino acids10.1016/S0002-8223(02)90346-9 ↗
18. Long-term biocompatibility of a corrodible peripheral iron stent in the porcine descending aorta10.1016/j.biomaterials.2006.05.029 ↗
19. Fe–Mn alloys for metallic biodegradable stents: Degradation and cell viability studies10.1016/j.actbio.2009.11.025 ↗
20. Effects of microstructure and heat treatment on mechanical properties and corrosion behavior of powder metallurgy derived Fe–30Mn alloy10.1016/j.msea.2017.07.054 ↗
21. Recrystallization behavior, microstructure evolution and mechanical properties of biodegradable Fe–Mn–C(–Pd) TWIP alloys10.1016/j.actamat.2012.01.041 ↗
22. Processing of New Materials by Additive Manufacturing: Iron-Based Alloys Containing Silver for Biomedical Applications10.1007/s11661-015-2932-2 ↗
23. High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
24. Design strategy for biodegradable Fe-based alloys for medical applications10.1016/j.actbio.2009.07.039 ↗
25. Selective laser melted Fe-Mn bone scaffold: Microstructure, corrosion behavior and cell response10.1088/2053-1591/ab62f5 ↗
26. Manganese toxicity upon overexposure10.1002/nbm.931 ↗
27. On the cytocompatibility of biodegradable Fe-based alloys10.1016/j.msec.2012.11.002 ↗
28. In vitro and in vivo corrosion properties of new iron–manganese alloys designed for cardiovascular applications10.1002/jbm.b.33234 ↗
29. Biodegradable Fe-based alloys for use in osteosynthesis: Outcome of an in vivo study after 52 weeks10.1016/j.actbio.2014.04.007 ↗
30. Cell−Material Interactions in Direct Contact Culture of Endothelial Cells on Biodegradable Iron-Based Stents Fabricated by Laser Powder Bed Fusion and Impact of Ion Release10.1021/acsami.1c21901 ↗
31. Advances in Fe-based biodegradable metallic materials10.1039/C6RA20594A ↗
32. Characterization and in vivo evaluation of a bio-corrodible nitrided iron stent10.1007/s10856-012-4823-z ↗
33. A simplified in vivo approach for evaluating the bioabsorbable behavior of candidate stent materials10.1002/jbm.b.31922 ↗
34. Short-Term Effects of Biocorrodible Iron Stents in Porcine Coronary Arteries10.1111/j.1540-8183.2007.00319.x ↗
35. In Vivo Evaluation of Bioabsorbable Fe-35Mn-1Ag: First Reports on In Vivo Hydrogen Gas Evolution in Fe-Based Implants10.1002/adhm.202000667 ↗
36. Degradation performance of biodegradable Fe\Mn\C(\Pd) alloys10.1016/j.msec.2012.10.013 ↗
37. A novel high-strength and highly corrosive biodegradable Fe-Pd alloy: Structural, mechanical and in vitro corrosion and cytotoxicity study10.1016/j.msec.2017.05.100 ↗
38. In vitro and in vivo degradability, biocompatibility and antimicrobial characteristics of Cu added iron-manganese alloy10.1016/j.jmst.2020.12.029 ↗
39. Fe–Au and Fe–Ag composites as candidates for biodegradable stent materials10.1002/jbm.b.33389 ↗
40. Antimicrobial silver: Uses, toxicity and potential for resistance10.1007/s10534-013-9645-z ↗
41. Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation10.1016/j.jallcom.2021.159544 ↗
42. Corrosion properties of bioresorbable FeMn-Ag alloys prepared by selective laser melting10.1002/maco.201709478 ↗
43. In Vitro Degradation, Hemocompatibility, and Cytocompatibility of Nanostructured Absorbable Fe−Mn−Ag Alloys for Biomedical Application10.1021/acsbiomaterials.0c00263 ↗
44. Biodegradation behaviour of Fe-based alloys in Hanks’ Balanced Salt Solutions: Part II. The evolution of local pH and dissolved oxygen concentration at metal interface
45. Effect of Selective Laser Melting on Microstructure, Mechanical, and Corrosion Properties of Biodegradable FeMnCS for Implant Applications10.1002/adem.202000182 ↗
46. Magnesium, Iron and Zinc Alloys, the Trifecta of Bioresorbable Orthopaedic and Vascular Implantation—A Review
47. Metal wear particles in hematopoietic marrow of the axial skeleton in patients with prior revision for mechanical failure of a hip or knee arthroplasty10.1002/jbm.b.34285 ↗
48. Dissemination of Wear Particles to the Liver, Spleen, and Abdominal Lymph Nodes of Patients with Hip or Knee Replacement10.2106/00004623-200004000-00002 ↗
49. Toxicity of silver nanoparticles on the brain of Oreochromis niloticus and Tilapia zillii10.1016/j.sjbs.2016.06.008 ↗
50. Occupational exposure to particles and incidence of stroke10.5271/sjweh.3271 ↗
51. Ambient air pollution and thrombosis10.1186/s12989-017-0237-x ↗
52. Degradable silver-based alloys10.1002/mawe.201900191 ↗
53. Bioresorbable AgCe and AgCeLa alloys for adapted Fe-based implants10.1016/j.matlet.2021.130890 ↗
54. Silver nanoparticles: Toxicity in model organisms as an overview of its hazard for human health and the environment10.1016/j.jhazmat.2019.121974 ↗
55. Silver-based antibacterial strategies for healthcare-associated infections: Processes, challenges, and regulations. An integrated review10.1016/j.nano.2019.102142 ↗
56. Influence of silver additions to type 316 stainless steels on bacterial inhibition, mechanical properties, and corrosion resistance10.1016/j.matchemphys.2009.08.035 ↗
57. Silver-coated megaendoprostheses in a rabbit model—An analysis of the infection rate and toxicological side effects10.1016/j.biomaterials.2004.01.008 ↗
58. Efficacy of antimicrobial coated orthopaedic implants on the prevention of periprosthetic infections: A systematic review and meta-analysis10.7150/jbji.44839 ↗
59. Novel antibacterial biodegradable Fe-Mn-Ag alloys produced by mechanical alloying10.1016/j.msec.2018.03.005 ↗
60. Effect of the addition of low rare earth elements (lanthanum, neodymium, cerium) on the biodegradation and biocompatibility of magnesium10.1016/j.actbio.2014.09.041 ↗
61. Health effects and toxicity mechanisms of rare earth elements—Knowledge gaps and research prospects10.1016/j.ecoenv.2015.01.030 ↗
62. Selective laser melting of silver submicron powder modified 316L stainless steel: Influence of silver addition on microstructures and performances10.1016/j.powtec.2020.01.082 ↗
63. Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants using varying laser-beam-melting-strategies10.1016/j.jmrt.2022.06.006 ↗
64. Krüger, J.T. (2022). Adjustment of AgCaLa Phases in a FeMn Matrix via LBM for Implants with Adapted Degradation. Crystals, 12.10.2139/ssrn.4132128 ↗
65. Effect of Ag on the Microstructure, Mechanical and Bio-corrosion Properties of Fe–30Mn Alloy10.1007/s40195-019-00911-5 ↗
66. On the Volta potential measured by SKPFM—Fundamental and practical aspects with relevance to corrosion science, Corrosion Engineering
67. Raman microspectroscopy of some iron oxides and oxyhydroxides10.1002/(SICI)1097-4555(199711)28:11<873::AID-JRS177>3.0.CO;2-B ↗
68. Raman spectroscopy to unravel the magnetic properties of iron oxide nanocrystals for bio-related applications10.1039/C9NA00064J ↗
69. Preparation of AgCl with enhanced photocatalytic activity using ionic liquid as chlorine source10.1007/s00339-020-03746-5 ↗
70. Paradigms and Paradoxes: The Solubility of AgCl in Water: Some Thermochemical Issues of Aqueous Ag+ Ion10.1023/B:STUC.0000011251.85406.ed ↗
71. Six-Month Long In Vitro Degradation Tests of Biodegradable Twinning-Induced Plasticity Steels Alloyed with Ag for Stent Applications10.1021/acsbiomaterials.1c00365 ↗
72. Pourbaix, M. (1974). Atlas of Electrochemical Equilibria. Aqueous Solutions, National Association of Corrosion Engineers. [2nd ed.].10.1007/978-1-4684-1806-4_4 ↗
73. Molybdenum, Molybdenum Oxides, and their Electrochemistry10.1002/cssc.201100660 ↗
74. Design and characterization of nano and bimodal structured biodegradable Fe-Mn-Ag alloy with accelerated corrosion rate10.1016/j.jallcom.2018.07.206 ↗
75. Effect of Silver on Corrosion Behavior of Plastically Deformed Twinning-Induced Plasticity Steel for Biodegradable Stents10.1007/s11837-020-04111-w ↗
76. The effect of alloying elements on the properties of pressed and non-pressed biodegradable Fe–Mn–Ag powder metallurgy alloys10.1016/j.heliyon.2019.e02522 ↗
77. Effect of silver additions on the microstructure, mechanical properties and corrosion behavior of biodegradable Fe-30Mn-6Si
78. Progress in manufacturing and processing of degradable Fe-based implants: A review10.1007/s40204-022-00189-4 ↗
79. In vitro degradation and biocompatibility of Fe–Pd and Fe–Pt composites fabricated by spark plasma sintering10.1016/j.msec.2013.10.023 ↗
80. Development of Degradable Fe-35Mn Alloy for Biomedical Application
81. Barrett, K.E., Barman, S.M., Yuan, J., and Brooks, H.L. (2019). Ganong’s Review of Medical Physiology, McGraw Hill/Medical.