journal article·2022-10-07Open access

Characteristics and Surface Serviceability for Cryogenic Milling Mg-1.6Ca-2.0Zn Medical Magnesium Alloy

Xuan Guo, Guodong Liu, Shunheng Sang, Qichao Lin, Yang Qiao

Abstract

Magnesium alloy has great potential as a new medical metal material because of its good biocompatibility and biodegradability. However, because of the active chemical properties of magnesium alloy, it is easy to react with oxygen and cutting fluid to release hydrogen. In this paper, by cutting magnesium alloys prepared under different cooling conditions, the phase composition of the machined surface was studied. Tensile strength and elongation were studied through tensile experiments at different temperatures. The effect of cryogenic milling on the service performance of a magnesium alloy machined surface was studied by the friction and wear test and electrochemical corrosion test. The results show that cryogenic milling contributes to the formation of the second phase of magnesium alloy, which has the effect of corrosion resistance, and has better tensile strength and elongation. Through the friction and wear test, it is found that the average friction coefficient decreases by about 7.4%, and the wear amount decreases by about 10% in the liquid nitrogen cooling environment. Through the electrochemical corrosion test, it was found that the oxide film formed in the liquid nitrogen cooling environment was more compact and uniform, and the crystal refinement of the surface layer was better.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, University of Jinan, Jinan 250022, China

Shandong Provincial Measurement and Testing Center, Jinan 252399, China

Funding

Shandong Higher Education Youth Innovation and Technology Support Program · Independent Innovation Team Foundation of Jinan

References (38)

Show source-provided references
1. Hydroxyapatite/titania composite coatings on biodegradable magnesium alloy for enhanced corrosion resistance, cytocompatibility and antibacterial properties10.1149/2.1171814jes ↗
2. Research progress of magnesium based alloy biomaterials
3. The essential role of zinc in growth10.1016/0271-5317(95)00003-8 ↗
4. Understanding corrosion behavior of Mg–Zn–Ca alloys from subcutaneous mouse model: Effect of Zn element concentration and plasma electrolytic oxidation10.1016/j.msec.2014.11.029 ↗
5. Biodegradable magnesium alloys for orthopaedic applications: A review on corrosion, biocompatibility and surface modifications10.1016/j.msec.2016.06.020 ↗
6. The effect of Zn concentration on the corrosion behavior of Mg–xZn alloys10.1016/j.corsci.2012.08.037 ↗
7. Research Progress on the Alloying of Biodegradable Magnesium Alloys
8. Wear behavior of extruded ZK60 magnesium alloy in simulated body fluid with different pH values10.1016/j.matchemphys.2021.124292 ↗
9. Mechanical properties, biodegradability and cytocompatibility of biodegradable Mg-Zn-Zr-Nd/Y alloys10.1016/j.jmst.2020.02.017 ↗
10. Surface integrity and corrosion performance of biomedical magnesium-calcium alloy processed by hybrid dry cutting-finish burnishing10.1016/j.jmbbm.2017.11.026 ↗
11. Effect of high speed dry machining on surface integrity and biodegradability of Mg-Ca1. 0 biodegradable alloy10.1016/j.matpr.2017.06.447 ↗
12. Research progress in corrosion behavior of biomedical magnesium alloys
13. Research on the mechanical property of magnesium-alloy bone plates and titanium-alloy ones during femoral fracture knitting
14. Application of degradable magnesium metal in orthopaedics
15. Problems and Countermeasures of Magnesium Alloy in Cutting Process
16. Effect of dipped cryogenic approach on thrust force, temperature, tool wear and chip formation in drilling of AZ31 magnesium alloy10.1016/j.jmrt.2020.01.038 ↗
17. Magnet-assisted laser hole-cutting in magnesium alloys with and without water immersion10.1016/j.jmapro.2020.11.026 ↗
18. Pu, Z. (2012). Cryogenic Machining and Burnishing of AZ31B Magnesium Alloy for Enhancing Surface Integrity and Functional Performance, University of Kentucky.
19. Research Status and Development Trend of High Strength and Toughness Die-cast Mg Alloys
20. Research Progress of High Strength Magnesium Alloy and Its Preparation Process
21. Overview of Cryogenic Cutting Machining Technology
22. Research Progress on Magnesium Alloy and Its Cryogenic Cutting
23. Cutting Properties Analysis of Titanium Alloy Base on Cryogenic Cooling
24. Influence of cryogenic cooling on tool wear and chip formation in turning of titanium alloy10.1016/j.procir.2016.03.184 ↗
25. Influence of Air Cooling on Surface Quality of Magnesium Alloy Cutting
26. Desai, S., Pawade, R., and Warhatkar, H. (2016). Influence of manufacturing parameters on performance of biodegradable Mg-Ca1. 0 implant. Proceedings of the International Conference on Communication and Signal Processing 2016 (ICCASP 2016), Atlantis Press.10.2991/iccasp-16.2017.40 ↗
27. Research progress on corrosion behavior and mechanism of magnesium alloy
28. Effect of Zn on mechanical property and corrosion property of extruded Mg-Zn-Mn alloy10.1016/S1003-6326(08)60131-4 ↗
29. Microstructure, mechanical and corrosion properties and biocompatibility of Mg–Zn–Mn alloys for biomedical application10.1016/j.msec.2008.08.024 ↗
30. Research on Preparation and Processing Properties of Medical Magnesium Alloy10.1016/j.procir.2020.05.128 ↗
31. Research progress on the effect of alloying on electrochemical corrosion rate of magnesium
32. Effect of Zn addition on the microstructure and mechanical properties of Mg-0.5 Ca-0.5 RE magnesium alloy10.1016/j.jallcom.2019.152380 ↗
33. Investigation on microstructure and mechanical properties of Al-Zn-Mg-Cu alloys with various Zn/Mg ratios10.1016/j.jmst.2020.12.045 ↗
34. Guo, W. (2016). Low-Temperature Mechanical Behavior of Commercial Wrought Magnesium Alloys, Chongqing University. (In Chinese).
35. The research of microstructure and mechanical properties of Mg–7Gd–3Y–1Nd–0.5 Zn–0.5 Zr (wt%) alloy10.1016/j.msea.2014.12.079 ↗
36. Tailored Mg and Cu contents affecting the microstructures and mechanical properties of high-strength Al–Zn–Mg–Cu alloys10.1016/j.msea.2016.01.039 ↗
37. Atomistic modeling of the effect of calcium on the yield surface of nanopolycrystalline magnesium-based alloys10.1016/j.commatsci.2015.10.034 ↗
38. Lin, X.Q. (2015). Influence of Second Phase and Defects on the Corrosion Resistance of Magnesium-Manganese-Calcium Alloy, Jilin University. (In Chinese).