journal article·2022-03-11Open access

Magnification of Iris through Clear Acrylic Resin in Ocular Prosthesis

Dinesh Rokaya, Jidapa Kritsana, Pokpong Amornvit, Nagendra Dhakal, Zohaib Khurshid, Muhammad Sohail Zafar, Preamjit Saonanon

Abstract

The study on the magnification of the clear acrylic resin in prosthetic dentistry is important but lacking. Hence, this research aimed to investigate the magnification of the iris in the ocular prosthesis with various thicknesses of clear heat cure acrylic resin. A total of 60 ocular prostheses were divided into six groups with various thicknesses of clear heat cure acrylic resin over the iris; T0 (control): no acrylic resin, T1: 2, T2: 4, T3: 6, T4: 8, and T5: 10 mm of clear acrylic resin over the iris. Each ocular prosthesis was manufactured from white acrylic, with a 10.250 mm iris. Then, the clear heat cure resin was placed over the iris, cured, then polished. The final diameter of the iris was measured with a vernier caliper. The sizes of the iris were compared among various groups using one-way ANOVA, and a significant level was chosen at p value = 0.01. The mean sizes of iris were T0 = 10.25, T1 = 10.92, T2 = 11.26, T3 = 11.91, T4 = 12.75, and T5 = 13.43 mm. The size of the iris was significantly different among the group (p < 0.0001). The magnification of the iris for different groups was 1.06 for T1, 1.10 for T2, 1.16 for T3, 1.24 for T4, and 1.31 for T5. The magnification of the iris increased as the thickness of clear heat cure acrylic resin over the iris is increased on the ocular prosthesis.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ocular Disorders and Treatments · Reconstructive Facial Surgery Techniques · Intraocular Surgery and Lenses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Clinical Dentistry, Walailak University International College of Dentistry, Walailak University, Bangkok 10400, Thailand

Oculoplastic and Reconstructive Surgery Unit, Department of Ophthalmology, Faculty of Medicine, King Chulalongkorn Memorial Hospital, Chulalongkorn University, Bangkok 10330, Thailand

PPFACEDESIGN Center, Sathorn, Bangkok 10120, Thailand

Department of Physics, University of Central Florida, Orlando, FL 32816, USA

Department of Prosthodontics and Implantology, College of Dentistry, King Faisal University, Al-Hofuf 31982, Al Ahsa, Saudi Arabia

Department of Restorative Dentistry, College of Dentistry, Taibah University, Al Madinah 41311, Al Munawwarah, Saudi Arabia

Department of Dental Materials, Islamic International Dental College, Riphah International University, Islamabad 44000, Pakistan

References (33)

Show source-provided references
1. Prevalence of ocular defects among patients visiting in an institutionalized hospital setting: A cross-sectional study10.4103/0975-5950.196131 ↗
2. Survey of ocular prosthetics rehabilitation in the united kingdom, part 1: Anophthalmic patients’ aetiology, opinions, and attitudes10.1097/SCS.0000000000003370 ↗
3. Enucleation and evisceration: Indications, complications and clinicopathological correlations
4. Enucleation and evisceration: 20 years of experience10.3109/01676830.2011.639477 ↗
5. Mental stress as consequence and cause of vision loss: The dawn of psychosomatic ophthalmology for preventive and personalized medicine10.1007/s13167-018-0136-8 ↗
6. Mobility, aesthetic, implants, and satisfaction of the ocular prostheses wearers10.1097/SCS.0b013e3181cfe898 ↗
7. Prosthetic rehabilitation of an ocular defect with post-enucleation socket syndrome: A case report10.1016/j.sdentj.2013.12.006 ↗
8. Ocular prosthesis: A brief review and fabrication of an ocular prosthesis for a geriatric patient10.1111/j.1741-2358.2007.00171.x ↗
9. Different techniques in fabrication of ocular prosthesis10.1097/SCS.0b013e31826701bb ↗
10. Fabrication of a custom ocular prosthesis10.4103/0974-9233.134694 ↗
11. Semi-automated fabrication of customized ocular prosthesis with three-dimensional printing and sublimation transfer printing technology10.1038/s41598-019-38992-y ↗
12. Fabrication of ocular prosthesis with a digital customization technique-a case report10.4103/jfmpc.jfmpc_133_19 ↗
13. Digital imaging in the fabrication of ocular prostheses10.1016/j.prosdent.2006.01.018 ↗
14. Complications from eye prosthesis
15. Custom ocular prosthesis-related concerns: Patient feedback survey-based report vis-à-vis objective clinical grading scales10.1080/01676830.2020.1797826 ↗
16. A thin lens formula of the electrostatic bi-potential lenses10.1078/0030-4026-00310 ↗
17. Essentials in fitting ocular prostheses for complex congenital and acquired anomalies
18. Custom-made ocular prosthesis for a pediatric patient with unilateral anopthalmia: A case report10.4103/0970-4388.117973 ↗
19. strabismus correction as an alternative treatment to evisceration and enucleation for artificial eye prosthesis intolerance in atrophic eyes10.1007/s00347-008-1838-4 ↗
20. Ocular prosthesis incorporating ips e-max press scleral veneer and a literature review on non-integrated ocular prosthesis
21. Color stability of the artificial iris button in an ocular prosthesis before and after acrylic resin polymerization10.1016/j.clae.2015.05.003 ↗
22. Effect of weathering and thickness on the superficial microhardness of acrylic resin and ocular button10.1016/j.clae.2009.09.001 ↗
23. Effect of weathering and thickness on roughness of acrylic resin and ocular button10.1016/j.clae.2009.12.008 ↗
24. Effect of different disinfectants on the microhardness and roughness of acrylic resins for ocular prosthesis10.1111/j.1741-2358.2012.00642.x ↗
25. Chromatic changes to artificial irises produced using different techniques10.1117/1.JBO.18.5.058002 ↗
26. Zafar, M.S. (2020). Prosthodontic applications of polymethyl methacrylate (pmma): An update. Polymers, 12.10.3390/polym12102299 ↗
27. Assessment of the flexural strength of two heat-curing acrylic resins for artificial eyes10.1590/S1806-83242009000300007 ↗
28. Color stability and hardness in dental composites after accelerated aging10.1016/S0109-5641(03)00003-4 ↗
29. Shen, C., Rawls, H.R., and Esquivel-Upshaw, J. (2021). Phillips’ Science of Dental Materials, Saunders. [13th ed.].
30. In vitro analysis of different properties of acrylic resins for ocular prosthesis submitted to accelerated aging with or without photopolymerized glaze10.1016/j.msec.2016.07.081 ↗
31. Poly(methyl methacrylate)/polyphosphate blends with tunable refractive indices for optical applications10.1016/j.optmat.2020.109841 ↗
32. Relative translucency of six all-ceramic systems. Part ii: Core and veneer materials10.1067/mpr.2002.126795 ↗
33. The refractive index of the human cornea: A review10.1016/j.clae.2019.04.018 ↗