Analysis of Chemisorbed Tribo-Film for Ceramic-on-Ceramic Hip Joint Prostheses by Raman Spectroscopy
Source abstract
Abstract
To understand the possible lubricant mechanism in ceramic-on-ceramic hip joint prostheses, biochemical reactions of the synovial fluid and the corresponding frictional coefficients were studied. The experiments were performed in a hip joint simulator using the ball-on-cup configuration with balls and cups made from two types of ceramics, BIOLOX®forte and BIOLOX®delta. Different lubricants, namely albumin, γ-globulin, hyaluronic acid and three model synovial fluids, were studied in the experiments and Raman spectroscopy was used to analyze the biochemical responses of these lubricants at the interface. BIOLOX®delta surface was found less reactive to proteins and model fluid lubricants. In contrast, BIOLOX®forte ball surface has shown chemisorption with both proteins, hyaluronic acid and model fluids imitating total joint replacement and osteoarthritic joint. There was no direct correlation between the measured frictional coefficient and the observed chemical reactions. In summary, the study reveals chemistry of lubricant film formation on ceramic hip implant surfaces with various model synovial fluids and their components.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Orthopedic Infections and Treatments · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Mechanical Engineering, Brno University of Technology, Technická 2896/2, 616 69 Brno, Czech Republic
Department of Condensed Matter Physics, Faculty of Science, Masaryk University, Kotlářská 267/2, 611 37 Brno, Czech Republic
Nano Mechanics and Tribology Laboratory, Department of Mechanical Engineering, University of Arkansas, Fayetteville, AR 72701, USA
Funding
Grantová Agentura České Republiky · Ministerstvo Školství, Mládeže a Tělovýchovy
References (56)
Show source-provided references
1. Čípek, P., Vrbka, M., Rebenda, D., Nečas, D., and Křupka, I. (2020). Biotribology of Synovial Cartilage: A New Method for Visualization of Lubricating Film and Simultaneous Measurement of the Friction Coefficient. Materials, 13.10.3390/ma13092075 ↗
2. Evidence from Raman spectroscopy of a putative link between inherent bone matrix chemistry and degenerative joint disease10.1002/art.38360 ↗
3. Biomaterials in orthopaedics10.1098/rsif.2008.0151 ↗
4. Holzwarth, U., and Cotogno, G. (2012). Total Hip Arthroplasty, European Commission.
5. Particle disease: Biologic mechanisms of periprosthetic osteolysis in total hip arthroplasty10.1177/1753425912451779 ↗
6. Systematic review of literature of cemented femoral components: What is the durability at minimum 20 years followup?10.1007/s11999-014-3876-3 ↗
7. The association between metal allergy, total hip arthroplasty, and revision: A case-control study10.3109/17453670903487008 ↗
8. Raman and fluorescence investigations on retrieved Biolox® delta femoral heads10.1002/jrs.4105 ↗
9. Piezo-spectroscopic analysis of the residual stresses in zirconia-toughened alumina ceramics: The influence of the tetragonal-to-monoclinic transformation10.1016/S0921-5093(99)00383-4 ↗
10. Zirconia phase transformation in retrieved, wear simulated, and artificially aged ceramic femoral heads10.1002/jor.23589 ↗
11. Tateiwa, T., Marin, E., Rondinella, A., Ciniglio, M., Zhu, W., Affatato, S., Pezzotti, G., Bock, R.M., McEntire, B.J., and Bal, B.S. (2020). Burst Strength of BIOLOX® delta Femoral Heads and Its Dependence on Low-Temperature Environmental Degradation. Materials, 13.10.3390/ma13020350 ↗
12. Retrieval analysis of three generations of Biolox® femoral heads: Spectroscopic and SEM characterization10.1016/j.jmbbm.2012.04.003 ↗
13. Taddei, P., Pavoni, E., and Affatato, S. (2017). Raman and Photoemission Spectroscopic Analyses of Explanted Biolox® Delta Femoral Heads Showing Metal Transfer. Materials, 10.10.3390/ma10070744 ↗
14. In situ observation of lubricant film formation in THR considering real conformity: The effect of model synovial fluid composition10.1016/j.triboint.2017.09.001 ↗
15. A model of synovial fluid lubricant composition in normal and injured joints10.22203/eCM.v013a03 ↗
16. Effect of conformational changes and differences of proteins on frictional properties of poly (vinyl alcohol) hydrogel10.1016/j.triboint.2007.02.010 ↗
17. Potential mechanism of action of intra-articular hyaluronan therapy in osteoarthritis: Are the effects molecular weight dependent?10.1053/sarh.2002.33720 ↗
18. Effect of intra-articular injection of hyaluronic acid on the clinical symptoms of osteoarthritis and on granulation tissue formation10.1097/00003086-197110000-00006 ↗
19. Hyaluronic acid: A natural biopolymer with a broad range of biomedical and industrial applications10.1007/s10529-006-9219-z ↗
20. Tribological role of synovial fluid compositions on artificial joints—A systematic review of the last 10 years10.1002/ls.1266 ↗
21. Rebenda, D., Vrbka, M., Čípek, P., Toropitsyn, E., Nečas, D., Pravda, M., and Hartl, M. (2020). On the Dependence of Rheology of Hyaluronic Acid Solutions and Frictional Behavior of Articular Cartilage. Materials, 13.10.3390/ma13112659 ↗
22. A preliminary study on sodium hyaluronate loaded polyvinyl alcohol nanofiber webs obtained via roller electrospinning10.1088/1757-899X/500/1/012024 ↗
23. Behaviour of synovial fluid on surfaces of articular cartilage. A scanning electron microscope study10.1136/ard.28.1.1 ↗
24. Characteristics of synovial fluid required for optimization of lubrication fluid for biotribological experiments10.1002/jbm.b.33663 ↗
25. Normal and prosthetic synovial joints are lubricated by surface-active phospholipid: A hypothesis10.1016/S0883-5403(03)00072-X ↗
26. Phospholipid-protein balance in affective disorders: Analysis of human blood serum using Raman and FTIR spectroscopy. A pilot study10.1016/j.jpba.2016.08.037 ↗
27. Role of hyaluronic acid and phospholipid in the lubrication of a cobalt–chromium head for total hip arthroplasty10.1116/1.4886255 ↗
28. On the observation of lubrication mechanisms within hip joint replacements. Part II: Hard-on-hard bearing pairs10.1016/j.jmbbm.2018.09.026 ↗
29. Lubrication and wear of joints
30. Furmann, D., Nečas, D., Rebenda, D., Čípek, P., Vrbka, M., Křupka, I., and Hartl, M. (2020). The Effect of Synovial Fluid Composition, Speed and Load on Frictional Behaviour of Articular Cartilage. Materials, 13.10.3390/ma13061334 ↗
31. The development of a small-scale wear test for CoCrMo specimens with human synovial fluid10.1016/j.biotri.2018.04.001 ↗
32. Biochemical comparisons of osteoarthritic human synovial fluid with calf sera used in knee simulator wear testing10.1002/jbm.a.32728 ↗
33. Surface-enhanced Raman scattering for protein detection10.1007/s00216-009-2702-3 ↗
34. A systematic review on correlation between biochemical and mechanical processes of lubricant film formation in joint replacement of the last 10 years10.1002/ls.1452 ↗
35. Visualization of lubricating films between artificial head and cup with respect to real geometry10.1016/j.biotri.2015.05.002 ↗
36. In situ observation of lubricant film formation in THR considering real conformity: The effect of diameter, clearance and material10.1016/j.jmbbm.2016.12.018 ↗
37. Nečas, D., Usami, H., Niimi, T., Sawae, Y., Křupka, I., and Hartl, M. (2020). Running-in friction of hip joint replacements can be significantly reduced: The effect of surface-textured acetabular cup. Friction, 1–6.10.1007/s40544-019-0351-x ↗
38. Assuming exponential decay by incorporating viscous damping improves the prediction of the coeffcient of friction in pendulum tests of whole articular joints10.1243/09544119JEIM248 ↗
39. A novel tribological study on DLC-coated micro-dimpled orthopedics implant interface10.1016/j.jmbbm.2014.11.028 ↗
40. The impact of surface and geometry on coefficient of friction of artificial hip joints10.1016/j.jmbbm.2017.05.011 ↗
41. Determination of a friction coefficient for THA bearing couples10.55095/achot2015/057 ↗
42. In situ Raman spectroscopy of alumina-supported metal oxide catalysts10.1021/j100191a051 ↗
43. Study of Raman spectra for γ-Al2O3 models by using first-principles method10.1016/j.ssc.2013.09.030 ↗
44. Human skin penetration of hyaluronic acid of different molecular weights as probed by Raman spectroscopy10.1111/srt.12228 ↗
45. Raman spectroscopy analysis of biodegradable electrospun nanofibers prepared from polymer blends10.1007/s00706-015-1639-9 ↗
46. Lin-Vien, D., Colthup, N.B., Fateley, W.G., and Grasselli, J.G. (1991). The Handbook of Infrared and Raman Characteristic Frequencies of Organic Molecules, Elsevier.
47. Raman spectroscopy of synovial fluid as a tool for diagnosing osteoarthritis10.1117/1.3130338 ↗
48. Diem, M. (2015). Modern Vibrational Spectroscopy and Micro-Spectroscopy: Theory, Instrumentation and Biomedical Applications, John Wiley & Sons.10.1002/9781118824924 ↗
49. Conformational modifications of α gliadin and globulin proteins upon complex coacervates formation with gum arabic as studied by Raman microspectroscopy10.1021/bm060131d ↗
50. Measurements of the absolute Raman cross sections of benzene10.1063/1.451795 ↗
51. Ultraviolet resonance Raman spectroscopic markers for protein structure and dynamics10.1016/j.trac.2017.12.002 ↗
52. Raman spectroscopy of proteins: A review10.1002/jrs.4335 ↗
53. Raman spectroscopic screening of high and low molecular weight fractions of human serum10.1039/C9AN00599D ↗
54. Fundamental study for all-ceramic artificial hip joint10.1016/S0043-1648(98)00386-X ↗
55. Effect of bovine serum constituents on the surface of the tribological pair alumina/alumina nanocomposites for total hip replacement10.1016/j.triboint.2009.12.043 ↗
56. In vitro investigation of friction under edge-loading conditions for ceramic-on-ceramic total hip prosthesis10.1002/jor.21100 ↗