journal article·2014-06-04Open access

Hydrodynamically Lubricated and Grooved Biomimetic Self-Adapting Surfaces

Robert Jackson, Jiang Lei

Abstract

In many machines and mechanical components, there is a need for new bearing technologies to reduce friction and wear, and provide precision control of motion when the load is varied. This can be provided by electronically controlled actuators and sensors on the surfaces, but then the system reliability can be an issue. In contrast, biomimetic surfaces can be created that adapt mechanically to variations in load. This work uses numerical methods to research the use of self-adapting surfaces for bearings that are based on the deformable nature of biological materials such as articular cartilage. These surfaces are designed to change their profiles to achieve a desired behavior, without any external control. The surfaces change their profile to control the film height and tilt of the bearing to a near constant value for different loads. If the surfaces are tilted, the grooved self-adapting surfaces will also react with a larger restoring moment than a conventional grooved surface. These surfaces could be beneficial to applications where electrical systems and controls are not feasible.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tribology and Lubrication Engineering · Adhesion, Friction, and Surface Interactions · Gear and Bearing Dynamics Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Engineering Department, Auburn University, 1418 Wiggins Hall, Auburn, AL 36849, USA

SKL SVMS, Xi'an Jiaotong University, 28 Xianning West Road, Xi'an 710049, Shaanxi, China

References (26)

Show source-provided references
1. Biomimetics: The science of imitating nature
2. Analysis of the hydrodynamic effects in a surface textured circumferential gas seal10.1080/10402000108982483 ↗
3. Analytical and experimental investigation of laser-textured mechanical seal faces10.1080/10402009908982248 ↗
4. The effect of laser texturing of steel surfaces and speed-load parameters on the transition of lubrication regime from boundary to hydrodynamic10.1080/05698190490440902 ↗
5. Experimental investigation of laser surface texturing for reciprocating automotive components10.1080/10402000208982572 ↗
6. Friction-reducing surface-texturing in reciprocating automotive components10.1080/10402000108982468 ↗
7. State of the art in laser surface texturing10.1115/1.1828070 ↗
8. A laser surface textured hydrostatic mechanical seal10.1080/10402000208982570 ↗
9. A laser surface textured parallel thrust bearing10.1080/10402000308982643 ↗
10. Hydrodynamic performance of a thrust bearing with micropatterned pads10.1080/05698190500313486 ↗
11. Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in water10.1016/S0301-679X(02)00145-7 ↗
12. Parallel sliding load support in the mixed friction regime. Part 1—The Experimental Data10.1115/1.3261317 ↗
13. Parallel sliding load support in the mixed friction regime. Part 2—Evaluation of the Mechanisms10.1115/1.3261319 ↗
14. The effect of laser texturing of SiC surface on the critical load for the transition of water lubrication mode from hydrodynamic to mixed10.1016/S0301-679X(01)00063-9 ↗
15. Virtual texturing: Modeling the performance of lubricated contacts of engineered surfaces10.1115/1.2000273 ↗
16. Inter-asperity cavitation and global cavitation in seals: An average flow analysis10.1016/S0301-679X(01)00103-7 ↗
17. Mixed lubrication model of liquid/gas mechanical face seals10.1080/10402009708983705 ↗
18. Elastohydrodynamic analysis of the effect of shaft surface finish on rotary lip seal behavior10.1080/10402000308982642 ↗
19. Mixed soft elastohydrodynamic lubrication model with interasperity cavitation and surface shear deformation10.1115/1.555358 ↗
20. Non-leaking lip seals: A roughness effect study10.1115/1.2920922 ↗
21. Applying bearing theory to the analysis and design of pad-type bearings
22. Self adapting mechanical step bearings for variations in load10.1007/s11249-005-7788-y ↗
23. Self-adapting microscale surface grooves for hydrodynamic lubrication10.1080/10402000801888960 ↗
24. On self-adaptive surface grooves10.1080/10402004.2010.496071 ↗
25. On the shape optimization of self-adaptive grooves10.1080/10402004.2010.539772 ↗
26. Hamrock, B.J. (1994). Fundamentals of Fluid Film Lubrication, Mcgraw-Hill Inc.