journal article·2023-11-16Open access

Using Functionalized Micron-Sized Glass Fibres for the Synergistic Effect of Glass Ionomer on Luting Material

Hanan Alsunbul, Aftab Ahmed Khan, Yasser M. Alqahtani, Saeed Awod bin Hassan, Waleed Asiri, Selma Saadaldin, Rasha Alharthi, Alhanoof Aldegheishem

Journal of Functional Biomaterials· Volume 14· Issue 11

Abstract

This laboratory experiment was conducted with the objective of augmenting the mechanical properties of glass ionomer cement (GIC) via altering the composition of GIC luting powder through the introduction of micron-sized silanized glass fibres (GFs). Experimental GICs were prepared through the addition of two concentrations of GFs (0.5% and 1.0% by weight) to the powder of commercially available GIC luting materials. The effect of GF in set GIC was internally evaluated using micro-CT while the mechanical attributes such as nano hardness (nH), elastic modulus (EM), compressive strength (CS), and diametral tensile strength (DTS) were gauged. Additionally, the physical properties such as water solubility and sorption, contact angle (CA), and film thickness were evaluated. Reinforced Ketac Cem Radiopaque (KCR) GIC with 0.5 wt.% GF achieved improved nH, EM, CS, and DTS without affecting the film thickness, CA or internal porosity of the set GIC cement. In contrast, both GF-GIC formulations of Medicem (MC) GIC showed the detrimental effect of the GF incorporation. Reinforcing KCR GIC with 0.5 wt.% silanized GFs could improve the physical and mechanical attributes of luting material. Silanized GF, with optimal concentration within the GIC powder, can be used as a functional additive in KCR GIC with promising results.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Orthopaedic implants and arthroplasty · Endodontics and Root Canal Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Restorative Dentistry Department, College of Dentistry, King Saud University, Riyadh 11451, Saudi Arabia

Dental Health Department, College of Applied Medical Sciences, King Saud University, Riyadh 11451, Saudi Arabia

Restorative Dentistry Department, Ministry of Health, Abha 61321, Saudi Arabia

Restorative Dental Sciences Department, College of Dentistry, King Khalid University, Abha 61321, Saudi Arabia

Restorative Dentistry Department, College of Dentistry, Najran University, Najran 66454, Saudi Arabia

Prosthodontics Division, Schulich School of Medicine and Dentistry, Western University, London, ON N6A 5B9, Canada

Clinical Dental Science Department, College of Dentistry, Princess Nourah bint Abdulrahman University, Riyadh 11671, Saudi Arabia

Funding

Ministry of Education in Saudi Arabia

References (24)

Show source-provided references
1. Evaluation of mechanical and adhesion properties of glass ionomer cement incorporating nano-sized hydroxyapatite particles10.1007/s10266-019-00427-5 ↗
2. Novel nano-hydroxyapatite-silica–added glass ionomer cement for dental application: Evaluation of surface roughness and sol-sorption10.1177/0967391119874678 ↗
3. Khan, A.A., Bari, A., Abdullah Al-Kheraif, A., Alsunbul, H., Alhaidry, H., Alharthi, R., and Aldegheishem, A. (2023). Oxidized Natural Biopolymer for Enhanced Surface, Physical and Mechanical Properties of Glass Ionomer Luting Cement. Polymers, 15.10.3390/polym15122679 ↗
4. Degree of polymerization of resin composites by different light sources10.1046/j.1365-2842.2002.00970.x ↗
5. Armellin, E., Bovesecchi, G., Coppa, P., Pasquantonio, G., and Cerroni, L. (2016). LED curing lights and temperature changes in different tooth sites. BioMed Res. Int., 2016.10.1155/2016/1894672 ↗
6. Polymerization shrinkage kinetics and degree of conversion of commercial and experimental resin modified glass ionomer luting cements (RMGICs)10.1016/j.dental.2020.04.010 ↗
7. Conversion-dependent shrinkage stress and strain in dental resins and composites10.1016/j.dental.2004.10.006 ↗
8. Antimicrobial effects of dental luting glass ionomer cements on Streptococcus mutans10.1155/2014/807086 ↗
9. Review on fluoride-releasing restorative materials—Fluoride release and uptake characteristics, antibacterial activity and influence on caries formation10.1016/j.dental.2006.01.022 ↗
10. Reinforcement of conventional glass-ionomer restorative material with short glass fibers10.1016/j.jmbbm.2008.04.002 ↗
11. Heboyan, A., Vardanyan, A., Karobari, M.I., Marya, A., Avagyan, T., Tebyaniyan, H., Mustafa, M., Rokaya, D., and Avetisyan, A. (2023). Dental Luting Cements: An Updated Comprehensive Review. Molecules, 28.10.3390/molecules28041619 ↗
12. Effect of short E-glass fiber reinforcement on surface and mechanical properties of glass-ionomer cements10.1142/S225123731740007X ↗
13. Hollow glass fibers in reinforcing glass ionomer cements10.1016/j.dental.2016.10.004 ↗
14. Reinforcing effect of discontinuous microglass fibers on resin-modified glass ionomer cement10.4012/dmj.2017-234 ↗
15. Glass fiber-reinforced composites in dentistry10.1186/s42269-021-00650-7 ↗
16. High-aspect ratio fillers: Fiber-reinforced composites and their anisotropic properties10.1016/j.dental.2014.07.009 ↗
17. Qualitative assessment of microstructure and Hertzian indentation failure in biocompatible glass ionomer cements10.1007/s10856-012-4553-2 ↗
18. (2007). Dentistry-Water-Based Cements—Part 1: Powder/Liquid Acid–Base Cements. Standard No. ISO 9917-1.
19. CAD/CAM milled glass fiber posts: Adaptation and mechanical behavior in flared root canals10.2341/20-198-L ↗
20. Modification of wettability property of titanium by laser texturing10.1007/s00170-016-8601-9 ↗
21. Effect on physical and mechanical properties of conventional glass ionomer luting cements by incorporation of all-ceramic additives: An in vitro study10.1155/2020/8896225 ↗
22. Nicholson, J.W., Sidhu, S.K., and Czarnecka, B. (2020). Enhancing the mechanical properties of glass-ionomer dental cements: A review. Materials, 13.10.3390/ma13112510 ↗
23. Alsunbul, H., Khan, A.A., De Vera, M.A.T., Bautista, L.S., and Javed, R. (2023). Utilizing an Oxidized Biopolymer to Enhance the Bonding of Glass Ionomer Luting Cement Particles for Improved Physical and Mechanical Properties. Biomimetics, 8.10.3390/biomimetics8040347 ↗
24. Singer, L., Bierbaum, G., Kehl, K., and Bourauel, C. (2020). Evaluation of the flexural strength, water sorption, and solubility of a glass ionomer dental cement modified using phytomedicine. Materials, 13.10.3390/ma13235352 ↗