Physical Characteristics and Biocompatibility of 3D-Printed Polylactic-Co-Glycolic Acid Membranes Used for Guided Bone Regeneration
Source abstract
Abstract
Bioresorbable polymeric membranes for guided bone regeneration (GBR) were fabricated using the three-dimensional printing technique. Membranes made of polylactic-co-glycolic acid (PLGA), which consist of lactic acid (LA) and glycolic acid in ratios of 10:90 (group A) and 70:30 (group B), were compared. Their physical characteristics including architecture, surface wettability, mechanical properties, and degradability were compared in vitro, and their biocompatibilities were compared in vitro and in vivo. The results demonstrated that the membranes of group B had mechanical strength and could support the proliferation of fibroblasts and osteoblasts significantly better than those of group A (p < 0.05). The degradation rate in Group B was significantly lower than that in Group A, but they significantly produced less acidic environment (p < 0.05). In vivo, the membranes of group B were compared with the commercially available collagen membranes (group C). The amount of newly formed bone of rat’s calvarial defects covered with the membranes of group C was stable after week 2, whereas that of group B increased over time. At week 8, the new bone volumes in group B were greater than those in group C (p > 0.05). In conclusion, the physical and biological properties of the PLGA membrane (LA:GA, 70:30) were suitable for GBR.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · 3D Printing in Biomedical Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Prince of Songkla University, Hatyai 90112, Songkhla, Thailand
Department of Prosthetic Dentistry, Faculty of Dentistry, Prince of Songkla University, Hatyai 90112, Songkhla, Thailand
Department of Chemistry, Faculty of Science, Chiang Mai University, Amphur Muang 50200, Chiang Mai, Thailand
Funding
National Science, Research and Innovation Fund (NSRF) · Prince of Songkla University
References (43)
Show source-provided references
1. Wong, C., Yoganarasimha, S., Carrico, C., and Madurantakam, P. (2019). Incorporation of Fibrin Matrix into Electrospun Membranes for Periodontal Wound Healing. Bioengineering, 30.10.3390/bioengineering6030057 ↗
2. Physiochemical properties and resorption progress of porcine skin-derived collagen membranes: In vitro and in vivo analysis10.4012/dmj.2017-065 ↗
3. Neto, A.M.D., Sartoretto, S.C., Duarte, I.M., Resende, R.F.d.B., Alves, A.T.N.N., Mourão, C.F.d.A.B., Calasans-Maia, J., Montemezzi, P., Tristão, G.C., and Calasans-Maia, M.D. (2020). In Vivo Comparative Evaluation of Biocompatibility and Biodegradation of Bovine and Porcine Collagen Membranes. Membranes, 10.10.3390/membranes10120423 ↗
4. Biocompatibility, resorption and biofunctionality of a new synthetic biodegradable membrane for guided bone regeneration10.1088/1748-6041/11/4/045012 ↗
5. Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier10.3390/polym3031377 ↗
6. Current development of biodegradable polymeric materials for biomedical applications10.2147/DDDT.S165440 ↗
7. Polymeric membranes for guided bone regeneration10.1002/biot.201100294 ↗
8. PLGA: A unique polymer for drug delivery10.4155/tde.14.91 ↗
9. Wang, J., Wang, L., Zhou, Z., Lai, H., Xu, P., Liao, L., and Wei, J. (2016). Biodegradable Polymer Membranes Applied in Guided Bone/Tissue Regeneration: A Review. Polymers, 8.10.3390/polym8040115 ↗
10. Mechanical Properties and In Vitro Degradation of PLGA Suture Manufactured via Electrospinning10.1007/s12221-014-0071-9 ↗
11. Clinical and radiographic evaluation of the effects of guided tissue regeneration using resorbable membranes after extraction of impacted mandibular third molars
12. Treatment of human class II furcation defects using connective tissue grafts, bioabsorbable membrane, and resorbable hydroxylapatite: A comparative study
13. Autogenous bone graft combined with polylactic polyglycolic acid polymer for treatment of dehiscence around immediate dental implants10.1016/j.tripleo.2009.07.023 ↗
14. A randomized controlled clinical multicenter trial comparing the clinical and histological performance of a new, modified polylactide-co-glycolide acid membrane to an expanded polytetrafluorethylene membrane in guided bone regeneration procedures10.1111/clr.12132 ↗
15. Polylactide and polyglycolide sponge used in human extraction sockets: Bone formation following 3 months after its application10.1111/j.1600-0501.2007.01311.x ↗
16. GTR treatment of intrabony defects with PLA/PGA copolymer or collagen bioresorbable membranes in combination with deproteinized bovine bone (Bio-Oss)10.1007/s00784-004-0277-0 ↗
17. Migration of osteoblastic cells on various guided bone regeneration membranes10.1034/j.1600-0501.2001.012004332.x ↗
18. Gore-tex((R)) versus resolut adapt((R)) GTR membranes with perioglas((R)) in periodontal regeneration10.4103/0976-237X.107427 ↗
19. Rittipakorn, P., Thuaksuban, N., Mai-Ngam, K., Charoenla, S., and Noppakunmongkolchai, W. (2021). Bioactivity of a Novel Polycaprolactone-Hydroxyapatite Scaffold Used as a Carrier of Low Dose BMP-2: An In Vitro Study. Polymers, 13.10.3390/polym13030466 ↗
20. Physical characteristics and biocompatibility of the polycaprolactone-biphasic calcium phosphate scaffolds fabricated using the modified melt stretching and multilayer deposition10.1177/0885328216633890 ↗
21. Effects of polycaprolactone-biphasic calcium phosphate scaffolds on enhancing growth and differentiation of osteoblasts
22. In vivo biocompatibility and degradation of novel Polycaprolactone-Biphasic Calcium phosphate scaffolds used as a bone substitute
23. Supphaprasitt, W., Charoenmuang, L., Thuaksuban, N., Sangsuwan, P., Leepong, N., Supakanjanakanti, D., Vongvatcharanon, S., Suwanrat, T., and Srimanok, W. (2022). A Three-Dimensional Printed Polycaprolactone-Biphasic-Calcium-Phosphate Scaffold Combined with Adipose-Derived Stem Cells Cultured in Xenogeneic Serum-Free Media for the Treatment of Bone Defects. J. Funct. Biomater., 13.10.3390/jfb13030093 ↗
24. Novel bioactive materials with different mechanical properties10.1016/S0142-9612(03)00044-9 ↗
25. Biocompatibility and Bioresorption of 3D-Printed Polylactide and Polyglycolide Tissue Membranes10.1007/s10517-021-05066-x ↗
26. Membranes for Guided Bone Regeneration: A Road from Bench to Bedside10.1002/adhm.202000707 ↗
27. Devices for periodontal regeneration10.1111/j.1600-0757.1999.tb00147.x ↗
28. Freeze-dried acellular dermal matrix graft: Effects of rehydration on physical, chemical, and mechanical properties10.1016/j.dental.2009.03.007 ↗
29. Recent advances in the development of GTR/GBR membranes for periodontal regeneration--a materials perspective10.1016/j.dental.2012.04.022 ↗
30. Physicochemical, mechanical, and biological properties of commercial membranes for GTR10.1002/jbm.1038 ↗
31. Tensile Properties of Three Selected Collagen Membranes10.1155/2019/5163603 ↗
32. Principles of bone grafting10.1016/j.coms.2010.06.001 ↗
33. Toledano, M., Asady, S., Toledano-Osorio, M., García-Godoy, F., Serrera-Figallo, M.-A., Benítez-García, J.A., and Osorio, R. (2020). Differential Biodegradation Kinetics of Collagen Membranes for Bone Regeneration. Polymers, 12.10.3390/polym12061290 ↗
34. Dimitriou, R., Mataliotakis, G.I., Calori, G.M., and Giannoudis, P.V. (2012). The role of barrier membranes for guided bone regeneration and restoration of large bone defects: Current experimental and clinical evidence. BMC Med., 10.10.1186/1741-7015-10-81 ↗
35. Evaluation of a high-density polytetrafluoroethylene (n-PTFE) membrane as a barrier material to facilitate guided bone regeneration in the rat mandible
36. Current barrier membranes: Titanium mesh and other membranes for guided bone regeneration in dental applications10.1016/j.jpor.2012.12.001 ↗
37. Barrier membranes used for ridge augmentation: Is there an optimal pore size?10.1016/j.joms.2008.11.022 ↗
38. Efficacy of high-density versus semipermeable PTFE membranes in an elderly experimental model10.1067/moe.2000.98922 ↗
39. Porosity effect of 3D-printed polycaprolactone membranes on calvarial defect model for guided bone regeneration10.1088/1748-605X/aa9bbc ↗
40. Influence of barrier occlusiveness on guided bone augmentation. An experimental study in the rat10.1034/j.1600-0501.1998.090406.x ↗
41. Periosteal cells in bone tissue engineering10.1089/10763270360696978 ↗
42. Bone augmentation techniques10.1902/jop.2007.060048 ↗
43. Fabrication of blended polycaprolactone/poly(lactic-co-glycolic acid)/beta-tricalcium phosphate thin membrane using solid freeform fabrication technology for guided bone regeneration10.1089/ten.tea.2011.0730 ↗