A Comparative Study of Three Approaches to Fibre’s Surface Functionalization
Source abstract
Abstract
Polyester-based scaffolds are of research interest for the regeneration of a wide spectrum of tissues. However, there is a need to improve scaffold wettability and introduce bioactivity. Surface modification is a widely studied approach for improving scaffold performance and maintaining appropriate bulk properties. In this study, three methods to functionalize the surface of the poly(lactide-co-ε-caprolactone) PLCL fibres using gelatin immobilisation were compared. Hydrolysis, oxygen plasma treatment, and aminolysis were chosen as activation methods to introduce carboxyl (-COOH) and amino (-NH2) functional groups on the surface before gelatin immobilisation. To covalently attach the gelatin, carbodiimide coupling was chosen for hydrolysed and plasma-treated materials, and glutaraldehyde crosslinking was used in the case of the aminolysed samples. Materials after physical entrapment of gelatin and immobilisation using carbodiimide coupling without previous activation were prepared as controls. The difference in gelatin amount on the surface, impact on the fibres morphology, molecular weight, and mechanical properties were observed depending on the type of modification and applied parameters of activation. It was shown that hydrolysis influences the surface of the material the most, whereas plasma treatment and aminolysis have an effect on the whole volume of the material. Despite this difference, bulk mechanical properties were affected for all the approaches. All materials were completely hydrophilic after functionalization. Cytotoxicity was not recognized for any of the samples. Gelatin immobilisation resulted in improved L929 cell morphology with the best effect for samples activated with hydrolysis and plasma treatment. Our study indicates that the use of any surface activation method should be limited to the lowest concentration/reaction time that enables subsequent satisfactory functionalization and the decision should be based on a specific function that the final scaffold material has to perform.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Electrospun Nanofibers in Biomedical Applications · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Laboratory of Polymers and Biomaterials, Institute of Fundamental Technological Research Polish Academy of Sciences, Pawińskiego 5b, 02-106 Warsaw, Poland
Funding
POLISH NATIONAL SCIENCE CENTRE (NCN)
References (72)
Show source-provided references
1. Biodegradable synthetic polymers for tissue engineering10.22203/eCM.v005a01 ↗
2. Ottenbrite, R.M., and Javan, R. (2005). Biological Structures. Encyclopedia of Condensed Matter Physics, Elsevier.10.1016/B0-12-369401-9/00698-7 ↗
3. Tuning the biomimetic behavior of scaffolds for regenerative medicine through surface modifications10.1002/term.2859 ↗
4. Qin, Y. (2016). A brief description of textile fibers. Medical Textile Materials, Woodhead Publishing.10.1016/B978-0-08-100618-4.00003-0 ↗
5. The effect of a solvent on cellular response to PCL/gelatin and PCL/collagen electrospun nanofibres10.1016/j.eurpolymj.2018.05.010 ↗
6. Characterization of printed PLA scaffolds for bone tissue engineering10.1002/jbm.a.36289 ↗
7. Poly-L-lactide scaffolds with super pores obtained by freeze-extraction method10.1002/jbm.b.34642 ↗
8. In vitro degradation and mechanical properties of PLA-PCL copolymer unit cell scaffolds generated by two-photon polymerization10.1088/1748-6041/11/1/015011 ↗
9. Effect of annealing on the mechanical properties of PLA/PCL and PLA/PCL/LTI polymer blends10.1016/j.jmbbm.2010.10.003 ↗
10. Kolbuk, D., Jeznach, O., Wrzecionek, M., and Gadomska-Gajadhur, A. (2020). Poly(Glycerol Succinate) as an Eco-Friendly Component of PLLA and PLCL Fibres towards Medical Applications. Polymers, 12.10.3390/polym12081731 ↗
11. Electrospun Skin Tissue Engineering Scaffolds Based on Polycaprolactone/Hyaluronic Acid/L-ascorbic Acid10.1007/s12221-021-0036-8 ↗
12. Vascular Tissue Engineering: Polymers and Methodologies for Small Caliber Vascular Grafts10.3389/fcvm.2020.592361 ↗
13. Bioinspired scaffold induced regeneration of neural tissue10.1016/j.eurpolymj.2019.02.008 ↗
14. Bladder Regeneration Using a Polycaprolactone Scaffold with a Gradient Structure and Growth Factors in a Partially Cystectomized Rat Model10.3346/jkms.2020.35.e374 ↗
15. An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering10.3390/ijms15033640 ↗
16. Scaffold Fiber Diameter Regulates Human Tendon Fibroblast Growth and Differentiation10.1089/ten.tea.2012.0072 ↗
17. Decellularized rhesus monkey kidney as a three-dimensional scaffold for renal tissue engineering10.1089/ten.tea.2009.0602 ↗
18. Decellularization Methods for Scaffold Fabrication
19. Decellularized matrices in regenerative medicine10.1016/j.actbio.2018.04.044 ↗
20. 3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering10.1021/acsbiomaterials.6b00288 ↗
21. Effect of the pore size in a 3D bioprinted gelatin scaffold on fibroblast proliferation10.1016/j.jiec.2018.07.013 ↗
22. Collagen Scaffolds in Cartilage Tissue Engineering and Relevant Approaches for Future Development10.1007/s13770-018-0135-9 ↗
23. Composite cell support membranes based on collagen and polycaprolactone for tissue engineering of skin10.1016/j.biomaterials.2003.11.022 ↗
24. Synthesis and characterization of gelatin-PVP polymer composite scaffold for potential application in bone tissue engineering10.1016/j.eurpolymj.2019.07.007 ↗
25. Assessment of cartilage regeneration on 3D collagen-polycaprolactone scaffolds: Evaluation of growth media in static and in perfusion bioreactor dynamic culture10.1016/j.colsurfb.2019.110403 ↗
26. Discovering Cell-Adhesion Peptides in Tissue Engineering: Beyond RGD10.1016/j.tibtech.2018.01.008 ↗
27. Arginyl-glycyl-aspartic acid (RGD): A cell adhesion motif10.1016/0968-0004(91)90096-E ↗
28. The specific recognition of a cell binding sequence derived from type I collagen by Hep3B and L929 cells10.1021/bm700587j ↗
29. Grafting of Gelatin on Electrospun Poly(caprolactone) Nanofibers to Improve Endothelial Cell Spreading and Proliferation and to Control Cell Orientation10.1089/ten.2005.11.1149 ↗
30. Protein-based Biointerfaces to Control Stem Cell Differentiation
31. Surface Modification of Electrospun Nanofibrous Scaffolds via Polysaccharide-Protein Assembly Multilayer for Neurite Outgrowth10.1039/c2jm32332j ↗
32. Improved Biomaterials for Tissue Engineering Applications: Surface Modification of Polymers10.2174/156802608783790893 ↗
33. Controllable surface modification of poly(lactic-co-glycolic acid) (PLGA) by hydrolysis or aminolysis I: Physical, chemical, and theoretical aspects10.1021/bm0343040 ↗
34. Surface modification and property analysis of biomedical polymers used for tissue engineering10.1016/j.colsurfb.2007.06.019 ↗
35. Grafting RGD containing peptides onto hydroxyapatite to promote osteoblastic cells adhesion10.1023/B:JMSM.0000032818.09569.d9 ↗
36. Tethering antimicrobial peptides onto chitosan: Optimization of azide-alkyne “click” reaction conditions10.1016/j.carbpol.2017.02.050 ↗
37. Polycaprolactone scaffold modified with galactosylated chitosan for hepatocyte culture10.1007/s13233-012-0056-8 ↗
38. Layer-by-layer assembly of chondroitin sulfate and collagen on aminolyzed poly(l-lactic acid) porous scaffolds to enhance their chondrogenesis10.1016/j.actbio.2007.04.007 ↗
39. Surface modification of model hydrogel contact lenses with hyaluronic acid via thiol-ene “click” chemistry for enhancing surface characteristics10.1177/0885328217733443 ↗
40. Poly(lactic acid) modifications10.1016/j.progpolymsci.2009.12.003 ↗
41. Synthesis of poly (lactide) s with modified thermal and mechanical properties10.1002/marc.201000088 ↗
42. Random poly(ε-caprolactone-L-alanine) by direct melt copolymerization10.1002/pi.6085 ↗
43. Characterization of the mechanical and thermal properties and morphological behavior of biodegradable poly(L-lactide)/poly(ε-caprolactone) and poly(L-lactide)/poly(butylene succinate-co-L-lactate) polymeric blends10.1002/app.30683 ↗
44. Biodegradable lactone copolymers. I. Characterization and mechanical behavior of ε-caprolactone and lactide copolymers10.1002/(SICI)1097-4628(19960222)59:8<1299::AID-APP13>3.0.CO;2-1 ↗
45. Development of ligament tissue biodegradable devices: A review10.1016/j.jbiomech.2009.07.019 ↗
46. Properties of ϵ-caprolactone/DL-lactide (ϵ-CL/DL-LA) copolymers with a minor ϵ-CL content10.1002/(SICI)1097-4636(199701)34:1<39::AID-JBM6>3.0.CO;2-O ↗
47. Shape-memory behaviors of biodegradable poly(L-lactide-co-ϵ-caprolactone) copolymers10.1002/app.27703 ↗
48. Suitability of a PLCL fibrous scaffold for soft tissue engineering applications: A combined biological and mechanical characterisation10.1177/0885328218757064 ↗
49. The amino acid composition of mammalian collagen and gelatin10.1042/bj0610589 ↗
50. Aminolysis as a surface functionalization method of aliphatic polyester nonwovens: Impact on material properties and biological response10.1039/D2RA00542E ↗
51. Plasma-induced graft polymerization of acrylic acid onto poly(ethylene terephthalate) films: Characterization and human smooth muscle cell growth on grafted films10.1016/S0142-9612(01)00195-8 ↗
52. Nuuttila, M. (2018). Gel Permeation Chromatography Methods in the Analysis of Lactide-Based Polymer. [Master’s Thesis, University of Jyväskylä]. Available online: http://urn.fi/URN:NBN:fi:jyu-201811054624.
53. Surface Modification of Aliphatic Polyester to Enhance Biocompatibility10.3389/fbioe.2019.00098 ↗
54. Non-mulberry silk fibroin grafted PCL nanofibrous scaffold: Promising ECM for bone tissue engineering10.1016/j.eurpolymj.2015.08.025 ↗
55. Functionalization of poly (lactic acid) scaffold surface by aminolysis and hyaluronan immobilization: How it affects mesenchymal stem cell proliferation10.1016/j.eurpolymj.2018.08.011 ↗
56. Effect of three different amines on the surface properties of electrospun polycaprolactone mats10.1080/00914037.2020.1785463 ↗
57. Polyester Fibers Can Be Rendered Calcium Phosphate-Binding by Surface Functionalization with Bisphosphonate Groups10.1002/jbm.a.36077 ↗
58. Mistry, B.D. (2009). A Handbook of Spectroscopic Data Chemistry (UV, JR, PMR, JJCNMR and Mass Spectroscopy), Oxford Book Company.
59. In-Depth Study on Aminolysis of Poly(ε-Caprolactone): Back to the Fundamentals10.1007/s11426-012-4540-y ↗
60. Influence of Plasma Treatment on the Molar Mass of Poly(Ethylene Terephthalate) Investigated by Different Chromatographic and Spectroscopic Methods10.1002/(SICI)1099-0518(19980730)36:10<1639::AID-POLA17>3.0.CO;2-H ↗
61. Jeznach, O., Kolbuk, D., and Sajkiewicz, P. (2019). Aminolysis of Various Aliphatic Polyesters in a Form of Nanofibers and Films. Polymers, 11.10.3390/polym11101669 ↗
62. Tubular Fibrous Scaffolds Functionalized with Tropoelastin as a Small-Diameter Vascular Graft10.1021/acs.biomac.0c00599 ↗
63. Fibroblasts
64. Proliferation and Adhesion of L929 Fibroblasts on Surface with Different Microtopography10.1557/opl.2014.228 ↗
65. Enhanced expression of the osteoblastic phenotype on substrates that modulate fibronectin conformation and integrin receptor binding10.1016/S0142-9612(01)00387-8 ↗
66. Surface chemistry modulates fibronectin conformation and directs integrin binding and specificity to control cell adhesion10.1002/jbm.a.10537 ↗
67. AFM imaging of immobilized fibronectin: Does the surface conjugation scheme affect the protein orientation/conformation?10.1021/la701323q ↗
68. Endothelial cell adhesion and blood response to hemocompatible peptide 1 (HCP-1), REDV, and RGD peptide sequences with free N-terminal amino groups immobilized on a biomedical expanded polytetrafluorethylene surface10.1039/D0BM01396J ↗
69. Fischer, N.G., He, J., and Aparicio, C. (2020). Surface Immobilization Chemistry of a Laminin-Derived Peptide Affects Keratinocyte Activity. Coatings, 10.10.3390/coatings10060560 ↗
70. Dendrimer surface orientation of the RGD peptide affects mesenchymal stem cell adhesion10.1039/C6RA06177J ↗
71. Surface Modification to Control Protein/Surface Interactions10.1002/mabi.201000464 ↗
72. Incorporation of adhesion peptides into nonadhesive hydrogels useful for tissue resurfacing10.1002/(SICI)1097-4636(199802)39:2<266::AID-JBM14>3.0.CO;2-B ↗