journal article·2014-10-24Open access

Synthesis and Characterization of Fatty Acid/Amino Acid Self-Assemblies

Joanna Gajowy, Durgadas Bolikal, Joachim Kohn, Miroslawa Fray

Abstract

In this paper, we discuss the synthesis and self-assembling behavior of new copolymers derived from fatty acid/amino acid components, namely dimers of linoleic acid (DLA) and tyrosine derived diphenols containing alkyl ester pendent chains, designated as “R” (DTR). Specific pendent chains were ethyl (E) and hexyl (H). These poly(aliphatic/aromatic-ester-amide)s were further reacted with poly(ethylene glycol) (PEG) and poly(ethylene glycol methyl ether) of different molecular masses, thus resulting in ABA type (hydrophilic-hydrophobic-hydrophilic) triblock copolymers. We used Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopies to evaluate the chemical structure of the final materials. The molecular masses were estimated by gel permeation chromatography (GPC) measurements. The self-organization of these new polymeric systems into micellar/nanospheric structures in aqueous environment was evaluated using ultraviolet/visible (UV-VIS) spectroscopy, dynamic light scattering (DLS) and transmission electron microscopy (TEM). The polymers were found to spontaneously self-assemble into nanoparticles with sizes in the range 196–239 nm and critical micelle concentration (CMC) of 0.125–0.250 mg/mL. The results are quite promising and these materials are capable of self-organizing into well-defined micelles/nanospheres encapsulating bioactive molecules, e.g., vitamins or antibacterial peptides for antibacterial coatings on medical devices.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Polymer Synthesis and Characterization · Biopolymer Synthesis and Applications · Analytical Chemistry and Chromatography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Biomaterials and Microbiological Technologies, The West Pomeranian University of Technology, Szczecin, Al. Piastow 45, 70-311 Szczecin, Poland

New Jersey Center for Biomaterials, Rutgers, The State University of New Jersey, 145 Bevier Road, Piscataway, NJ 08854, USA

References (37)

Show source-provided references
1. Effects of the chemical structure and the surface properties of polymeric biomaterials on their biocompatibility10.1023/B:PHAM.0000036909.41843.18 ↗
2. Fraise, A.P., Maillard, J.-Y., and Sattar, S.A. (2012). Russell, Hugo & Ayliffe’s: Principles and Practice of Disinfection, Preservation and Sterilization, Wiley. [5th ed.].10.1002/9781118425831 ↗
3. The surface modification of medical polyurethane to improve the hydrophilicity and lubricity: The effect of pretreatment10.1002/app.31499 ↗
4. Surface modification of polymers: Physical, chemical, mechanical and biological methods10.1002/masy.19961010150 ↗
5. Chemically induced graft copolymerization of 2-hydroxyethyl methacrylate onto polyurethane surface for improving blood compatibility10.1016/j.apsusc.2011.08.074 ↗
6. Effect of 2-methacryloyloxyethyl phosphorylcholine concentration on photo-induced graft polymerization of polyethylene in reducing the wear of orthopaedic bearing surface10.1002/jbm.a.31511 ↗
7. Modification of polysiloxane polymers for biomedical applications: A review10.1002/pi.783 ↗
8. Self-assembling polystyrene-block-poly(ethylene oxide) copolymer surface coatings: Resistance to protein and cell adhesion10.1016/j.biomaterials.2009.01.012 ↗
9. Simple surface treatment using amphiphilic phospholipid polymers to obtain wetting and lubricity on polydimethylsiloxane-based substrates10.1016/j.colsurfb.2012.04.008 ↗
10. Polymer surface with graft chains10.1016/S0079-6700(02)00032-1 ↗
11. A novel low-friction surface for biomedical applications: modification of poly(dimethylsiloxane) (PDMS) with polyethylene glycol(PEG)-DOPA-lysine10.1002/jbm.a.32141 ↗
12. Frictional properties of poly(MPC-co-BMA) phospholipid polymer for catheter applications10.1016/S0142-9612(03)00450-2 ↗
13. Friction behavior of high-density poly(2-methacryloyloxyethyl phosphorylcholine) brush in aqueous media10.1039/b615780g ↗
14. Chitosan/poly(vinyl alcohol) blending hydrogel coating improves the surface characteristics of segmented polyurethane urethral catheters10.1002/jbm.b.30796 ↗
15. Fatty acid synthesis is a target for antibacterial activity of unsaturated fatty acids10.1016/j.febslet.2005.08.028 ↗
16. Bactericidal effects of fatty acids and monoglycerides on Helicobacter pylori10.1016/S0924-8579(02)00205-4 ↗
17. Bioactive properties and chemical composition of six walnut (Juglans regia L.) cultivars10.1016/j.fct.2008.02.002 ↗
18. Enzymatic polymerization of tyrosine derivatives. Peroxidase- and protease-catalyzed synthesis of poly(tyrosine)s with different structures10.1021/bm020016c ↗
19. Novel molecular combination deriving from natural aminoacids and polyphenols: Design, synthesis and free-radical scavenging activities10.1016/j.ejmech.2012.02.018 ↗
20. Five-coordinated oxovanadium(IV) complexes derived from amino acids and ciprofloxacin: Synthesis, spectral, antimicrobial, and DNA interaction approach10.1016/j.bmcl.2008.10.068 ↗
21. Polymers derived from the amino acid l-tyrosine: Polycarbonates, polyarylates and copolymers with poly(ethylene glycol)10.1016/S0169-409X(03)00038-3 ↗
22. Development of paclitaxel-TyroSpheres for topical skin treatment10.1016/j.jconrel.2012.06.021 ↗
23. Hydrophobic drug delivery by self-assembling triblock copolymer-derived nanospheres10.1021/bm050212u ↗
24. Paclitaxel in tyrosine-derived nanospheres as a potential anti-cancer agent: In vivo evaluation of toxicity and efficacy in comparison with paclitaxel in Cremophor10.1016/j.ejps.2011.11.017 ↗
25. Topical drug delivery by a polymeric nanosphere gel: Formulation optimization and in vitro and in vivo skin distribution studies10.1016/j.jconrel.2010.10.005 ↗
26. Biocompatibility studies of new multiblock poly(ester-ester)s composed of poly(butylene terephthalate) and dimerized fatty acid10.1016/S0142-9612(02)00026-1 ↗
27. Fatigue behaviour of multiblock thermoplastic elastomers. 1. Stepwise increasing load testing of poly(aliphatic/aromatic-ester) copolymers10.1016/S0032-3861(03)00417-8 ↗
28. Fatigue behaviour of multiblock thermoplastic elastomers. 2. Dynamic creep of poly(aliphatic/aromatic-ester) copolymers10.1016/S0032-3861(03)00418-X ↗
29. Fatigue behaviour of multiblock thermoplastic elastomers. 3. Stepwise increasing strain test of poly (aliphatic/aromatic-ester) copolymers10.1016/j.polymer.2003.10.034 ↗
30. Synthesis and characterization of telechelic macromers containing fatty acid derivatives10.1016/j.reactfunctpolym.2012.07.010 ↗
31. Sheet, S.D. (2008). PRIPOL TM Polymerised Fatty Acids, Croda Group.
32. Synthesis of oligo(poly(ethylene glycol) fumarate)10.1038/nprot.2012.055 ↗
33. (2009). MestReNova, Mestrelab Research.
34. (2005). Empower, Waters Associates. version 2.
35. Design, synthesis, and preliminary characterization of tyrosine-containing polyarylates: new biomaterials for medical applications10.1163/156856294X00176 ↗
36. Effect of tyrosine-derived triblock copolymer compositions on nanosphere self-assembly and drug delivery10.1021/bm060860t ↗
37. Micellization and gelation of aqueous solutions of star-shaped PEG–PCL block copolymers consisting of branched 4-arm poly(ethylene glycol) and polycaprolactone blocks10.1016/j.eurpolymj.2007.02.039 ↗