journal article·2023-04-24Open access

Porous Biocoatings Based on Diatomite with Incorporated ZrO2 Particles for Biodegradable Magnesium Implants

Mariya B. Sedelnikova, Alexander D. Kashin, Pavel V. Uvarkin, Alexey I. Tolmachev, Yurii P. Sharkeev, Anna V. Ugodchikova, Nikita A. Luginin, Olga V. Bakina

Abstract

In the present work, the surface of a biodegradable Mg alloy was modified to create porous diatomite biocoatings using the method of micro-arc oxidation. The coatings were applied at process voltages in the range of 350–500 V. We have studied the influence of the addition of ZrO2 microparticles on the structure and properties of diatomite-based protective coatings for Mg implants. The structure and properties of the resulting coatings were examined using a number of research methods. It was found that the coatings have a porous structure and contain ZrO2 particles. The coatings were mostly characterized by pores less than 1 μm in size. However, as the voltage of the MAO process increases, the number of larger pores (5–10 μm in size) also increases. However, the porosity of the coatings varied insignificantly and amounted to 5 ± 1%. It has been revealed that the incorporation of ZrO2 particles substantially affects the properties of diatomite-based coatings. The adhesive strength of the coatings has increased by approximately 30%, and the corrosion resistance has increased by two orders of magnitude compared to the coatings without zirconia particles.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Bone Tissue Engineering Materials · Surface Treatment and Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laboratory of Physics of Nanostructured Biocomposites, Institute of Strength Physics and Materials Science of SB RAS, Tomsk 634055, Russia

Research School of High-Energy Physics, National Research Tomsk Polytechnic University, Tomsk 634050, Russia

Laboratory of Plasma Synthesis of Materials, Troitsk Institute for Innovation & Fusion Research, Troitsk 108840, Russia

Laboratory of Nanobioengineering, Institute of Strength Physics and Materials Science of SB RAS, Tomsk 634055, Russia

Funding

Russian Science Foundation

References (64)

Show source-provided references
1. Autologous bone graft: Is it still the gold standard?10.1016/j.injury.2021.01.043 ↗
2. Induced membrane technique in the treatment of infectious bone defect: A clinical analysis10.1016/j.otsr.2019.01.007 ↗
3. Overview of methods for enhancing bone regeneration in distraction osteogenesis: Potential roles of biometals
4. Treatment of critical-sized bone defects: Clinical and tissue engineering perspectives10.1007/s00590-017-2063-0 ↗
5. Autologous cell-based therapy for treatment of large bone defects: From bench to bedside10.1007/s00068-018-0906-y ↗
6. Applications of bone regeneration hydrogels in the treatment of bone defects: A review10.1007/s10853-021-06675-7 ↗
7. Treatment of Bone Defects by Transplantation of Genetically Modified Mesenchymal Stem Cell Spheroids10.1016/j.omtm.2018.04.006 ↗
8. Tissue Engineering and Cell-Based Therapies for Fractures and Bone Defects10.3389/fbioe.2018.00105 ↗
9. Metallic implants with properties and latest production techniques: A review
10. Recent progress in biodegradable and bioresorbable materials: From passive implants to active electronics10.1016/j.apmt.2021.101257 ↗
11. Biodegradable metallic bone implants10.1039/C8QM00507A ↗
12. Prasad, K., Bazaka, O., Chua, M., Rochford, M., Fedrick, L., Spoor, J., Symes, R., Tieppo, M., Collins, C., and Cao, A. (2017). Metallic Biomaterials: Current Challenges and Opportunities. Materials, 10.10.3390/ma10080884 ↗
13. Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants—A review article10.1016/j.jallcom.2017.04.231 ↗
14. Review on titanium and titanium based alloys as biomaterials for orthopaedic applications10.1016/j.msec.2019.04.064 ↗
15. Additively manufactured porous titanium 3D–scaffolds with antibacterial Zn-, Ag- calcium phosphate biocoatings10.1016/j.matchar.2022.111782 ↗
16. Rational design, bio-functionalization and biological performance of hybrid additive manufactured titanium implants for orthopaedic applications: A review10.1016/j.jmbbm.2020.103671 ↗
17. Antibacterial metals and alloys for potential biomedical implants10.1016/j.bioactmat.2021.01.030 ↗
18. 3D printing of patient-specific 316L–stainless–steel medical implants using fused filament fabrication technology: Two veterinary case studies10.1007/s42242-022-00200-8 ↗
19. Postoperative Administration of Alpha-tocopherol Enhances Osseointegration of Stainless Steel Implants: An In Vivo Rat Model10.1097/CORR.0000000000001037 ↗
20. Powder metallurgy with space holder for porous titanium implants: A review10.1016/j.jmst.2020.11.005 ↗
21. Preoperative Canal Bone Ratio is Related to High-Degree Stress Shielding: A Minimum 5-Year Follow-Up Study of a Proximally Hydroxyapatite-Coated Straight Tapered Titanium Femoral Component10.1016/j.arth.2017.12.019 ↗
22. Prakasam, M., Locs, J., Salma-Ancane, K., Loca, D., Largeteau, A., and Berzina-Cimdina, L. (2017). Biodegradable Materials and Metallic Implants—A Review. J. Funct. Biomater., 8.10.3390/jfb8040044 ↗
23. Current status and outlook on the clinical translation of biodegradable metals10.1016/j.mattod.2018.05.018 ↗
24. Design of biodegradable, implantable devices towards clinical translation10.1038/s41578-019-0150-z ↗
25. Performance analysis of biodegradable materials for orthopedic applications10.1016/j.mtcomm.2022.103167 ↗
26. Current development of biodegradable polymeric materials for biomedical applications10.2147/DDDT.S165440 ↗
27. A comprehensive review of biodegradable synthetic polymer-ceramic composites and their manufacture for biomedical applications10.1016/j.bioactmat.2018.11.003 ↗
28. Chakraborty Banerjee, P., Al-Saadi, S., Choudhary, L., Harandi, S.E., and Singh, R. (2019). Magnesium Implants: Prospects and Challenges. Materials, 12.10.3390/ma12010136 ↗
29. In vivo quantification of hydrogen gas concentration in bone marrow surrounding magnesium fracture fixation hardware using an electrochemical hydrogen gas sensor10.1016/j.actbio.2018.04.032 ↗
30. Visual Hydrogen Mapping Sensor for Noninvasive Monitoring of Bioresorbable Magnesium Implants In Vivo10.1007/s11837-020-04052-4 ↗
31. Mechanical properties of magnesium alloys for medical application: A review10.1016/j.jmbbm.2018.07.022 ↗
32. Diatomite-based ceramic biocoating for magnesium implants10.1016/j.ceramint.2022.06.111 ↗
33. Sedelnikova, M.B., Ugodchikova, A.V., Tolkacheva, T.V., Chebodaeva, V.V., Cluklhov, I.A., Khimich, M.A., Bakina, O.V., Lerner, M.I., Egorkin, V.S., and Schmidt, J. (2021). Surface Modification of Mg0.8Ca Alloy via Wollastonite Micro-Arc Coatings: Significant Improvement in Corrosion Resistance. Metals, 11.10.3390/met11050754 ↗
34. Simchen, F., Sieber, M., Kopp, A., and Lampke, T. (2020). Introduction to Plasma Electrolytic Oxidation—An Overview of the Process and Applications. Coatings, 10.10.3390/coatings10070628 ↗
35. A review of recent work on discharge characteristics during plasma electrolytic oxidation of various metals10.1080/09506608.2018.1466492 ↗
36. Surface characterization and corrosion behavior of calcium phosphate (Ca-P) base composite layer on Mg and its alloys using plasma electrolytic oxidation (PEO): A review10.1016/j.jma.2020.07.004 ↗
37. Formation mechanism of calcium phosphate coating on a plasma electrolytic oxidized magnesium and its corrosion behavior in simulated body fluids10.1016/j.jallcom.2019.152834 ↗
38. Systematic optimization of corrosion, bioactivity, and biocompatibility behaviors of calcium-phosphate plasma electrolytic oxidation (PEO) coatings on titanium substrates10.1016/j.ceramint.2021.11.175 ↗
39. Sedelnikova, M., Bakina, O., Ugodchikova, A., Tolkacheva, T., Khimich, M., Uvarkin, P., Kashin, A., Miller, A., Egorkin, V., and Schmidt, J. (2022). The Role of Microparticles of β-TCP and Wollastonite in the Creation of Biocoatings on Mg0.8Ca Alloy. Metals, 12.10.3390/met12101647 ↗
40. Kazek-Kęsik, A., Leśniak, K., Zhidkov, I.S., Korotin, D.M., Kukharenko, A.I., Cholakh, S.O., Kalemba-Rec, I., Suchanek, K., Kurmaev, E.Z., and Simka, W. (2017). Influence of Alkali Treatment on Anodized Titanium Alloys in Wollastonite Suspension. Metals, 7.10.3390/met7090322 ↗
41. The properties of hydroxyapatite ceramic coatings produced by plasma electrolytic oxidation10.1016/j.ceramint.2017.10.114 ↗
42. Increasing the in-vitro corrosion resistance of AZ31B-Mg alloy via coating with hydroxyapatite using plasma electrolytic oxidation10.1080/21870764.2019.1698143 ↗
43. Formation mechanism, corrosion behaviour and biological property of hydroxyapatite/TiO2 coatings fabricated by plasma electrolytic oxidation10.1016/j.surfcoat.2020.125483 ↗
44. Investigation of hydroxyapatite (HAP) containing coating on grade 2 titanium alloy prepared by plasma electrolytic oxidation (PEO) at low voltage10.1016/j.surfin.2022.101888 ↗
45. Improving surface features of PEO coatings on titanium and titanium alloys with zirconia particles: A review10.1016/j.surfin.2020.100888 ↗
46. Influence of alumina and zirconia incorporations on the structure and wear resistance of titania-based MAO coatings10.1016/j.surfcoat.2019.124900 ↗
47. A study to enhance the mechanical durability of the MAO coating fabricated on the 7075 Al alloy for wear-related high temperature applications10.1016/j.surfcoat.2021.126843 ↗
48. Lu, X., Chen, Y., Blawert, C., Li, Y., Zhang, T., Wang, F., Kainer, K.U., and Zheludkevich, M. (2018). Influence of SiO2 Particles on the Corrosion and Wear Resistance of Plasma Electrolytic Oxidation-Coated AM50 Mg Alloy. Coatings, 8.10.3390/coatings8090306 ↗
49. Influence of SiO2 nanoparticles incorporating into ceramic coatings generated by PEO on Aluminium alloy: Morphology, adhesion, corrosion, and wear resistance10.1016/j.mtcomm.2022.103587 ↗
50. The effect of dispersity of silicon dioxide nanoparticles added to electrolyte on the composition and properties of oxide layers formed by plasma electrolytic oxidation on magnesium 9995A10.1016/j.matlet.2019.01.080 ↗
51. Influence of ZrO2/SiO2 nanomaterial incorporation on the properties of PEO layers on Mg-Mn-Ce alloy10.1016/j.jma.2021.04.013 ↗
52. Improving surface characteristics of PEO coatings of Mg and its alloys with zirconia nanoparticles: A review10.1016/j.apsadv.2021.100131 ↗
53. Micro-arc oxidation of magnesium alloys: A review10.1016/j.jmst.2021.11.053 ↗
54. Wang, Z., Cheng, Z., Zhang, Y., Shi, X., Rao, M., and Wu, S. (2023). Effect of Voltage on the Microstructure and High-Temperature Oxidation Resistance of Micro-Arc Oxidation Coatings on AlTiCrVZr Refractory High-Entropy Alloy. Coatings, 13.10.3390/coatings13010014 ↗
55. Role of the electrolyte composition in establishing plasma discharges and coating growth process during a micro-arc oxidation10.1016/j.surfcoat.2020.126349 ↗
56. Effect of ZrO2 types on ZrSiO4 formation10.1016/j.ceramint.2019.08.048 ↗
57. The effect of pulsed electron irradiation on the structure, phase composition, adhesion and corrosion properties of calcium phosphate coating on Mg0.8Ca alloy10.1016/j.matchemphys.2022.126996 ↗
58. Investigation of the plasma electrolytic oxidation mechanism of titanium10.1016/j.apsusc.2019.05.250 ↗
59. Improvement of oxide layers formed by plasma electrolytic oxidation on cast Al–Si alloy by incorporating TiC nanoparticles10.1016/j.surfcoat.2021.127603 ↗
60. A study on microstructure and corrosion resistance of ZrO2-containingPEO coatings formed on AZ31 Mg alloy in phosphate-based electrolyte10.1016/j.apsusc.2015.10.025 ↗
61. Evaluation of plasma temperature during plasma oxidation processing of AZ91 Mg alloy through analysis of the melting behavior of incorporated particles10.1016/j.electacta.2012.01.053 ↗
62. Degradation behavior of PEO coating on AM50 magnesium alloy produced from electrolytes with clay particle addition10.1016/j.surfcoat.2014.11.027 ↗
63. Zirconia in biomedical applications10.1080/17434440.2016.1230017 ↗
64. Magnani, G., Fabbri, P., Leoni, E., Salernitano, E., and Mazzanti, F. (2021). New Perspectives on Zirconia Composites as Biomaterials. J. Compos. Sci., 5.10.3390/jcs5090244 ↗