journal article·2022-05-23Open access

Corncob Cellulose Scaffolds: A New Sustainable Temporary Implant for Cartilage Replacement

Rachel Cordeiro, Marta Henriques, João C. Silva, Filipe Antunes, Nuno Alves, Carla Moura

Abstract

Tissue engineering using scaffolds is a promising strategy to repair damaged articular cartilage, whose self-repair is inefficient. Cellulose properties have been recognized for their application in the biomedical field. The aim of this study was to fabricate and characterize novel scaffolds based on poly(ɛ-caprolactone) (PCL) and sustainable cellulose. Thus, the performance of corncob-derived cellulose (CC) in scaffolds as an alternative to wood cellulose (WC) was also investigated to reduce the environmental footprint. Two concentrations of CC in scaffolds were tested, 1% and 2% (w/w), and commercial WC using the same concentrations, as a control. Morphologically, all the developed scaffolds presented pore sizes of ~300 µm, 10 layers, a circular shape and well-dispersed cellulose. Thus, all of these characteristics and properties provide the manufactured scaffolds suitable for use in cartilage-replacement strategies. The use of 2% CC results in higher porosity (54.24%), which promotes cell infiltration/migration and nutrient exchange, and has similar mechanical properties to WC. As for the effects of enzymatic degradation of the scaffolds, no significant changes (p > 0.05) were observed in resistance over time. However, the obtained compressive modulus of the scaffold with 2% CC was similar to that of WC. Overall, our results suggest that the integration of 2% corncob cellulose in PCL scaffolds could be a novel way to replace wood-cellulose-containing scaffolds, highlighting its potential for cartilage-replacement strategies.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Reconstructive Surgery and Microvascular Techniques · Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Centre for Rapid and Sustainable Product Development, Polytechnic of Leiria, 2430-028 Marinha Grande, Portugal

Polytechnic Institute of Coimbra, Coimbra Agriculture School, 3045-601 Coimbra, Portugal

Research Centre for Natural Resources, Environment and Society (CERNAS), Polytechnic Institute of Coimbra, 3045-601 Coimbra, Portugal

IBB—Institute for Bioengineering and Biosciences and Department of Bioengineering, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal

Associate Laboratory i4HB—Institute for Health and Bioeconomy, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa, Portugal

Coimbra Chemistry Centre, Department of Chemistry, University of Coimbra, 3004-535 Coimbra, Portugal

Science 351, Instituto Pedro Nunes, Ed C, 3030-199 Coimbra, Portugal

Funding

Fundação para a Ciência e a Tecnologia FCT/MCTES (PIDDAC) and Centro2020 · Associate Laboratory ARISE · Associate Laboratory i4HB · BIODISCUS

References (52)

Show source-provided references
1. Diagnosis and Management of Rheumatoid Arthritis10.1001/jama.2018.13103 ↗
2. Rheumatoid Arthritis: Pathological Mechanisms and Modern Pharmacologic Therapies10.1038/s41413-018-0016-9 ↗
3. Global, Regional, and National Incidence, Prevalence, and Years Lived with Disability for 354 Diseases and Injuries for 195 Countries and Territories, 1990–2017: A Systematic Analysis for the Global Burden of Disease Study 201710.1016/S0140-6736(18)32279-7 ↗
4. Knee Articular Cartilage Repair and Restoration Techniques10.1177/1941738115611350 ↗
5. Stem Cell Therapy for Articular Cartilage Repair: Review of the Entity of Cell Populations Used and the Result of the Clinical Application of Each Entity10.1177/0363546517729152 ↗
6. Repair and Tissue Engineering Techniques for Articular Cartilage10.1038/nrrheum.2014.157 ↗
7. Current Concepts of Articular Cartilage Restoration Techniques in the Knee10.1177/1941738113508917 ↗
8. Thermosensitive Hydrogels as Scaffolds for Cartilage Tissue Engineering10.1021/acs.biomac.9b00043 ↗
9. Three-Dimensional Porous Scaffolds with Biomimetic Microarchitecture and Bioactivity for Cartilage Tissue Engineering10.1021/acsami.9b12206 ↗
10. Longley, R., Ferreira, A., and Gentile, P. (2018). Recent Approaches to the Manufacturing of Biomimetic Multi-Phasic Scaffolds for Osteochondral Regeneration. Int. J. Mol. Sci., 19.10.3390/ijms19061755 ↗
11. Biodegradable Scaffolds for Cartilage Tissue Engineering
12. Strategic Design and Fabrication of Engineered Scaffolds for Articular Cartilage Repair10.3390/jfb3040799 ↗
13. Wasyłeczko, M., Sikorska, W., and Chwojnowski, A. (2020). Review of Synthetic and Hybrid Scaffolds in Cartilage Tissue Engineering. Membranes, 10.10.3390/membranes10110348 ↗
14. Yahya, E.B., Amirul, A.A., Khalil, H.P.S.A., Olaiya, N.G., Iqbal, M.O., Jummaat, F., Sofea, A.K.A., and Adnan, A.S. (2021). Insights into the Role of Biopolymer Aerogel Scaffolds in Tissue Engineering and Regenerative Medicine. Polymers, 13.10.3390/polym13101612 ↗
15. Engineering Cartilage Tissue10.1016/j.addr.2007.08.027 ↗
16. 3D Printed Cartilage-Like Tissue Constructs with Spatially Controlled Mechanical Properties10.1002/adfm.201906330 ↗
17. An Overview of Advanced Biocompatible and Biomimetic Materials for Creation of Replacement Structures in the Musculoskeletal Systems: Focusing on Cartilage Tissue Engineering10.1186/s13036-019-0209-9 ↗
18. Zone-Dependent Mechanical Properties of Human Articular Cartilage Obtained by Indentation Measurements10.1007/s10856-018-6066-0 ↗
19. Cellulose Biomaterials for Tissue Engineering10.3389/fbioe.2019.00045 ↗
20. Preparation and Characterization of Methacrylated Gelatin/Bacterial Cellulose Composite Hydrogels for Cartilage Tissue Engineering10.1093/rb/rbz050 ↗
21. Minocycline-Loaded Cellulose Nano Whiskers/Poly(Sodium Acrylate) Composite Hydrogel Films as Wound Dressing10.1016/j.ijbiomac.2015.04.060 ↗
22. Bacterial Cellulose-Based Scaffold Materials for Bone Tissue Engineering10.1016/j.apmt.2018.01.004 ↗
23. Cellulose Acetate/Poly Lactic Acid Coaxial Wet-Electrospun Scaffold Containing Citalopram-Loaded Gelatin Nanocarriers for Neural Tissue Engineering Applications10.1016/j.ijbiomac.2017.05.054 ↗
24. Investigation on Artificial Blood Vessels Prepared from Bacterial Cellulose10.1016/j.msec.2014.10.023 ↗
25. Namkaew, J., Laowpanitchakorn, P., Sawaddee, N., Jirajessada, S., Honsawek, S., and Yodmuang, S. (2021). Carboxymethyl Cellulose Entrapped in a Poly(Vinyl) Alcohol Network: Plant-Based Scaffolds for Cartilage Tissue Engineering. Molecules, 26.10.3390/molecules26030578 ↗
26. Cellulose and Its Derivatives: Towards Biomedical Applications10.1007/s10570-020-03674-w ↗
27. Development of Reinforced Chitosan/Pectin Scaffold by Using the Cellulose Nanocrystals as Nanofillers: An Injectable Hydrogel for Tissue Engineering10.1016/j.eurpolymj.2020.109697 ↗
28. 3D Printed Porous Cellulose Nanocomposite Hydrogel Scaffolds
29. Cordeiro, R.S. (2019). Biopolímeros Para Otimização de Scaffolds Em Aplicações Biomédicas: Extração e Caracterização. [Master’s Thesis, Universidade de Coimbra].
30. Reducing Tropical Deforestation10.1126/science.aax8546 ↗
31. Recovery and Evaluation of Cellulose from Agroindustrial Residues of Corn, Grape, Pomegranate, Strawberry-Tree Fruit and Fava10.1186/s40643-021-00377-3 ↗
32. Bioactive Scaffolds for Osteochondral Regeneration
33. Smaida, R., Favreau, H., Naja, M., Hua, G., Fioretti, F., Benkirane-Jessel, N., Scipioni, D., and Kuchler-Bopp, S. (2021). Polycaprolactone Based Biomaterials and Sodium Hyaluronate Nanoreservoirs for Cartilage Regeneration. Stem Cells and Regenerative Medicine, Proceedings of the 9th International Europe-China Symposium, Strasbourg, France, 2–4 October 2019, IOS Press.10.3233/BHR210018 ↗
34. 3D Printed PCL/GelMA Biphasic Scaffold Boosts Cartilage Regeneration Using Co-Culture of Mesenchymal Stem Cells and Chondrocytes: In Vivo Study10.1016/j.matdes.2021.110065 ↗
35. Polycaprolactone–Carboxymethyl Cellulose Composites for Manufacturing Porous Scaffolds by Material Extrusion10.1007/s42242-018-0024-z ↗
36. Three-Dimensional Printed Polycaprolactone-Microcrystalline Cellulose Scaffolds10.1002/jbm.b.34142 ↗
37. Domingos, M.A.N., Ferreira, N.M., Mateus, A.J.d.S., Bártolo, P.J.d.S., ALmeida, H.d.A., Mota, C.M.D., and Alves, N.M.F. (2010). Processo e Equipamento de Fabrico Rápido Por Bioextrusão. (PT104247B), Portuguese Patent.
38. Moura, C. (2010). Expert System for Medical Applications. [Master’s Thesis, Instituto Politécnico de Leiria].
39. International Organization for Standardization (ISO) (2009). Biological Evaluation of Medical Devices-Part 5: Tests for Citotoxicity (ISO EN 10993-5) and Part 12: Sample Preparation and Reference Materials (ISO 10993-12), International Organization for Standardization.
40. Experimental FTIR and Simulation Studies on H-Bonds of Model Polyurethane in Solutions. I: In Dimethylformamide (DMF)10.1016/j.saa.2011.06.057 ↗
41. Complex Formation between Lysozyme and Cartilage Proteoglycans10.1016/0005-2795(74)90132-9 ↗
42. Dual Effects of N,N-Dimethylformamide on Cell Proliferation and Apoptosis in Breast Cancer10.1177/1559325817744450 ↗
43. Phenotypic Instability of Chondrocytes in Osteoarthritis: On a Path to Hypertrophy10.1111/nyas.13930 ↗
44. 3-Dimensional Porous Nanocomposite Scaffolds Based on Cellulose Nanofibers for Cartilage Tissue Engineering: Tailoring of Porosity and Mechanical Performance10.1039/C5RA27246G ↗
45. In Vitro and in Vivo Characteristics of PCL Scaffolds with Pore Size Gradient Fabricated by a Centrifugation Method10.1016/j.biomaterials.2006.11.024 ↗
46. Comparison of Three-Dimensional Extruded Poly (ɛ-Caprolactone) and Polylactic Acid Scaffolds with Pore Size Variation10.1016/j.procir.2015.11.018 ↗
47. Bilayered PLGA/PLGA-HAp Composite Scaffold for Osteochondral Tissue Engineering and Tissue Regeneration10.1021/acsbiomaterials.8b00552 ↗
48. Chondrogenic Differentiation of Mesenchymal Stem/Stromal Cells on 3D Porous Poly (ε-Caprolactone) Scaffolds: Effects of Material Alkaline Treatment and Chondroitin Sulfate Supplementation10.1016/j.jbiosc.2020.01.004 ↗
49. Lutzweiler, G., Ndreu Halili, A., and Engin Vrana, N. (2020). The Overview of Porous, Bioactive Scaffolds as Instructive Biomaterials for Tissue Regeneration and Their Clinical Translation. Pharmaceutics, 12.10.3390/pharmaceutics12070602 ↗
50. Combinatory Approach for Developing Silk Fibroin Scaffolds for Cartilage Regeneration10.1016/j.actbio.2018.03.047 ↗
51. The “instantaneous” Compressive Modulus of Human Articular Cartilage in Joints of the Lower Limb10.1093/rheumatology/38.2.124 ↗
52. Incorporation of Lysozyme into Cellulose Nanocrystals Stabilized β-Chitosan Nanoparticles with Enhanced Antibacterial Activity10.1016/j.carbpol.2020.115974 ↗