journal article·2015-10-10Open access

How Sensitive Is the Elasticity of Hydroxyapatite-Nanoparticle-Reinforced Chitosan Composite to Changes in Particle Concentration and Crystallization Temperature?

Kean Wang, Kin Liao, Kheng Lim Goh

Abstract

Hydroxyapatite (HA) nanoparticle-reinforced chitosan composites are biocompatible and biodegradable structural materials that are used as biomaterials in tissue engineering. However, in order for these materials to function effectively as intended, e.g., to provide adequate structural support for repairing damaged tissues, it is necessary to analyse and optimise the material processing parameters that affect the relevant mechanical properties. Here we are concerned with the strength, stiffness and toughness of wet-spun HA-reinforced chitosan fibres. Unlike previous studies which have addressed each of these parameters as singly applied treatments, we have carried out an experiment designed using a two-factor analysis of variance to study the main effects of two key material processing parameters, namely HA concentration and crystallization temperature, and their interactions on the respective mechanical properties of the composite fibres. The analysis reveals that significant interaction occurs between the crystallization temperature and HA concentration. Starting at a low HA concentration level, the magnitude of the respective mechanical properties decreases significantly with increasing HA concentration until a critical HA concentration is reached, at around 0.20–0.30 (HA mass fraction), beyond which the magnitude of the mechanical properties increases significantly with HA concentration. The sensitivity of the mechanical properties to crystallization temperature is masked by the interaction between the two parameters—further analysis reveals that the dependence on crystallization temperature is significant in at least some levels of HA concentration. The magnitude of the mechanical properties of the chitosan composite fibre corresponding to 40 °C is higher than that at 100 °C at low HA concentration; the reverse applies at high HA concentration. In conclusion, the elasticity of the HA nanoparticle-reinforced chitosan composite fibre is sensitive to HA concentration and crystallization temperature, and there exists a critical concentration level whereby the magnitude of the mechanical property is a minimum.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemical Engineering, The Petroleum Institute, Abu Dhabi, P.O. Box 2533, United Arab Emirates

Department of Aerospace Engineering, Khalifa University of Science Technology and Research, Abu Dhabi, P.O. Box 127788, United Arab Emirates

Department of Mechanical Engineering, Khalifa University of Science Technology and Research, Abu Dhabi, P.O. Box 127788, United Arab Emirates

School of Mechanical & Systems Engineering, Newcastle University, Newcastle Upton Tyne, Tyne and Wear NE1 7RU, UK

NU International Singapore, 172A Ang Mo Kio Avenue 8, #05-01, SIT Building@Nanyang Polytechnic, Singapore 567739, Singapore

References (31)

Show source-provided references
1. Hydroxyapatite nanorods as novel fillers for improving the properties of dental adhesives: Synthesis and application10.1016/j.dental.2010.01.005 ↗
2. The use of hydroxyapatite in orthopaedic surgery: A ten-year review10.1007/BF01695730 ↗
3. Wang, Z., and Hu, Q. (2010). Preparation and properties of three-dimensional hydroxyapatite/chitosan nanocomposite rods. Biomdical Mater., 5.10.1088/1748-6041/5/4/045007 ↗
4. Formation of nano-hydroxyapatite crystal in situ in chitosan–pectin polyelectrolyte complex network10.1016/j.msec.2010.03.011 ↗
5. Influence of hydroxyapatite crystallization temperature and concentration on stress transfer in wet-spun nanohydroxyapatite- chitosan composite fibres10.1088/1748-6041/3/2/025014 ↗
6. Synthesis methods for nanosized hydroxyapatite with diverse structures10.1016/j.actbio.2013.04.012 ↗
7. Temperature driven morphological changes of chemically precipitated hydroxyapatite nanoparticles10.1021/la049304f ↗
8. Preparation and microstructure analysis of chitosan/hydroxyapatite nanocomposites10.1002/1097-4636(200104)55:1<20::AID-JBM30>3.0.CO;2-F ↗
9. Alignment hierarchies: Engineering architecture from the nanometre to the micrometre scale10.1098/rsif.2010.0346.focus ↗
10. Hierarchical mechanics of connective tissues: Integrating insights from nano to macroscopic studies10.1166/jbn.2014.1960 ↗
11. Electrospun chitosan-based nanofibers and their cellular compatibility10.1016/j.biomaterials.2005.03.027 ↗
12. Biomaterials electrospun biomimetic nanocomposite nanofibers of hydroxyapatite/chitosan for bone tissue engineering10.1016/j.biomaterials.2008.07.038 ↗
13. Response of human mesenchymal stem cells to intrafibrillar nanohydroxyapatite content and extrafibrillar nanohydroxyapatite in biomimetic chitosan/silk fibroin/nanohydroxyapatite nanofibrous membrane scaffolds
14. Solid state synthesis and thermal stability of HAP and HAP–β-TCP composite ceramic powders10.1023/A:1018586412270 ↗
15. Preparation of spherical powders of hydroxyapatite by sol-gel process10.1016/S0022-3093(05)80672-6 ↗
16. Hydroxyapatite particles synthesized by pyrolysis of an aerosol10.1006/jssc.1994.1264 ↗
17. Hydrothermal processing of hydroxyapatite nanoparticles—A Taguchi experimental design approach10.1016/j.jcrysgro.2012.09.010 ↗
18. Processing of hydroxyapatite via microemulsion and emulsion routes10.1016/S0142-9612(97)00081-1 ↗
19. Phase transformation process and step growth mechanism of hydroxyapatite whiskers under constant impulsion system10.1016/j.jcrysgro.2011.05.026 ↗
20. The transformation of single-crystal calcium phosphate ribbon-like fibres to hydroxyapatite spheres assembled from nanorods
21. Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites10.1016/j.compositesb.2008.01.002 ↗
22. Effect of fibre shape on the stresses within fibres in fibre-reinforced composite materials10.1098/rspa.1999.0454 ↗
23. Finite element analysis of the effect of fibre shape on stresses in an elastic fibre surrounded10.1023/A:1004725903966 ↗
24. Influence of fibre taper on the work of fibre pull-out in short fibre composite fracture10.1007/s10853-009-4050-2 ↗
25. Stress transfer and fracture in nanostructured particulate-reinforced chitosan biopolymer composites: Influence of interfacial shear stress and particle slenderness
26. Influence of fibre taper on the interfacial shear stress in fibre-reinforced composite materials during elastic stress transfer10.1163/092764409X12580201111665 ↗
27. Nano-fibre critical length depends on shape10.1177/096369350801700403 ↗
28. Finite-element analysis of the effect of material properties and fibre shape on stresses in an elastic fibre embedded in an elastic matrix in a fibre-composite material10.1098/rspa.2003.1264 ↗
29. Modelling of flame temperature of solution combustion synthesis of nanocrystalline calcium hydroxyapatite material and its parametric optimization10.1007/s12034-010-0052-6 ↗
30. Dalton, A.B., Collins, S., Munoz, E., Razal, J.M., Ebron, V.H., Ferraris, J.P., Coleman, J.N., Kim, B.G., and Baughman, R.H. (2003). Super-tough carbon-nanotube fibres. Nature, 423.10.1038/423703a ↗
31. Elasticity, thermal stability and bioactivity of polyhedral oligomeric silsesquioxanes reinforced chitosan-based microfibres10.1007/s10856-011-4318-3 ↗