journal article·2022-06-16Open access

Direct Ink Write Printing of Chitin-Based Gel Fibers with Customizable Fibril Alignment, Porosity, and Mechanical Properties for Biomedical Applications

Devis Montroni, Takeru Kobayashi, Taige Hao, Derek Lublin, Tomoko Yoshino, David Kisailus

Abstract

A fine control over different dimensional scales is a challenging target for material science since it could grant control over many properties of the final material. In this study, we developed a multivariable additive manufacturing process, direct ink write printing, to control different architectural features from the nano- to the millimeter scale during extrusion. Chitin-based gel fibers with a water content of around 1500% were obtained extruding a polymeric solution of chitin into a counter solvent, water, inducing instant solidification of the material. A certain degree of fibrillar alignment was achieved basing on the shear stress induced by the nozzle. In this study we took into account a single variable, the nozzle’s internal diameter (NID). In fact, a positive correlation between NID, fibril alignment, and mechanical resistance was observed. A negative correlation with NID was observed with porosity, exposed surface, and lightly with water content. No correlation was observed with maximum elongation (~50%), and the scaffold’s excellent biocompatibility, which appeared unaltered. Overall, a single variable allowed a customization of different material features, which could be further tuned, adding control over other aspects of the synthetic process. Moreover, this manufacturing could be potentially applied to any polymer.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Materials and Mechanics · Silk-based biomaterials and applications · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, University of California at Irvine, Irvine, CA 92697, USA

Department of Chemistry “G. Ciamician”, Alma Mater Studiorum-University of Bologna, Via Selmi 2, 40126 Bologna, Italy

Department of Biotechnology, Tokyo University of Agriculture and Technology, 2-24-16 Naka-cho, Koganei 184-8588, Tokyo, Japan

Materials and Manufacturing Technology Program, School of Engineering, University of California at Irvine, Irvine, CA 92697, USA

Funding

Air Force Office of Scientific Research, Natural Materials and Systems Program · Mechanics of Multifunctional Materials and Microsystems Program · Army Research Office, Biochemistry Program

References (41)

Show source-provided references
1. Nanoarchitected Tough Biological Composites from Assembled Chitinous Scaffolds10.1021/acs.accounts.2c00110 ↗
2. Structural Design Variations in Beetle Elytra10.1002/adfm.202106468 ↗
3. The Stomatopod Dactyl Club: A Formidable Damage-Tolerant Biological Hammer10.1126/science.1218764 ↗
4. Toughening mechanisms of the elytra of the diabolical ironclad beetle10.1038/s41586-020-2813-8 ↗
5. Heteroatoms-doped hierarchical porous carbon derived from chitin for flexible all-solid-state symmetric supercapacitors10.1016/j.cej.2019.123263 ↗
6. Flexible, angle-independent, structural color reflectors inspired by morpho butterfly wings10.1002/adma.201200521 ↗
7. Optically ambidextrous circularly polarized reflection from the chiral cuticle of the scarab beetle Chrysina resplendens10.1098/rsif.2017.0129 ↗
8. Multiscale Toughening Mechanisms in Biological Materials and Bioinspired Designs10.1002/adma.201901561 ↗
9. Shear-induced alignment of collagen fibrils using 3D cell printing for corneal stroma tissue engineering10.1088/1758-5090/ab1a8b ↗
10. Biomimetic 4D printing10.1038/nmat4544 ↗
11. Rotational 3D printing of damage-tolerant composites with programmable mechanics10.1073/pnas.1715157115 ↗
12. Additively Manufactured Multi-Morphology Bone-like Porous Scaffolds: Experiments and Micro-Computed Tomography-Based Finite Element Modeling Approaches10.18063/ijb.v8i3.556 ↗
13. International Journal of Polymeric Materials and 3D printing of porous alginate/gelatin hydrogel scaffolds and their mechanical property characterization10.1080/00914037.2016.1201830 ↗
14. Bio-printing cell-laden Matrigel—Agarose constructs10.1177/0885328216669238 ↗
15. Solvent Mediating the in Situ Self-Assembly of Polysaccharides for 3D Printing Biomimetic Tissue Scaffolds10.1021/acsnano.1c05956 ↗
16. Current advances and future perspectives of 3D printing natural-derived biopolymers10.1016/j.carbpol.2018.11.077 ↗
17. Recent advances in 3D printing with protein-based inks10.1016/j.progpolymsci.2021.101375 ↗
18. Elastic modulus in the crystalline region and the thermal expansion coefficients of α-chitin determined using synchrotron radiated X-ray diffraction10.1016/j.carbpol.2010.09.025 ↗
19. Design and mechanical properties of insect cuticle10.1016/j.asd.2004.05.006 ↗
20. β-Chitin samples with similar microfibril arrangement change mechanical properties varying the degree of acetylation10.1016/j.carbpol.2018.11.069 ↗
21. Self-assembled chitin nano fibers and applications. Adv10.1016/j.cis.2014.01.019 ↗
22. A facile bottom-up route to self-assembled biogenic chitin nanofibers10.1039/c0sm00450b ↗
23. β-Chitin Nanofibril Self-Assembly in Aqueous Environments10.1021/acs.biomac.9b00481 ↗
24. Chitin—A promising biomaterial for tissue engineering and stem cell technologies10.1016/j.biotechadv.2013.09.007 ↗
25. Cartilage—Scaffold Composites Produced by Bioresorbable b -Chitin Sponge with Cultured Rabbit Chondrocytes10.1089/107632704323061942 ↗
26. Hydroxyapatite—chitin materials as potential tissue engineered bone substitutes10.1016/S0142-9612(03)00612-4 ↗
27. Doxorubicin-Loaded Squid Pen Plaster: A Natural Drug Delivery System for Cancer Cells10.1021/acsabm.9b01137 ↗
28. Doxorubicin-loaded pH-responsive chitin nanogels for drug delivery to cancer cells10.1016/j.carbpol.2011.10.040 ↗
29. Green Biocompatible Method for the Synthesis of Collagen/Chitin Composites to Study Their Composition and Assembly Influence on Fibroblasts Growth10.1021/acs.biomac.1c00463 ↗
30. Rasband, W.S. (2022, January 28). ImageJ, Available online: https://imagej.nih.gov/ij/.
31. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
32. Thermostability analyses of glucomannan gels. Concentration influence10.1016/j.foodhyd.2012.02.011 ↗
33. Influence of proteins on mechanical properties of a natural chitin-protein composite10.1016/j.actbio.2020.04.039 ↗
34. Morphology and organization of the internal shell of Ariolimax californicus (Gastropoda; Stylommatophora), an asymmetric two-face biomineralized matrix10.1016/j.jsb.2021.107764 ↗
35. Physicochemical Characteristics and Functional Properties of Various Commercial Chitin and Chitosan Products10.1021/jf971047f ↗
36. How a decreased fibrillar interconnectivity influences stiffness and swelling properties during early cartilage degeneration10.1016/j.jmbbm.2017.07.042 ↗
37. Solid-state MAS NMR, TEM, and TGA studies of structural hydroxyl groups and water in nanocrystalline apatites prepared by dry milling10.1007/s11051-013-1868-y ↗
38. Advanced physico-chemical characterization of chitosan by means of TGA coupled on-line with FTIR and GCMS: Thermal degradation and water adsorption capacity10.1016/j.polymdegradstab.2014.12.006 ↗
39. Solid freeform fabrication of aqueous alumina-poly(vinyl alcohol) gelcasting suspensions10.1111/j.1151-2916.2000.tb01569.x ↗
40. Modeling the Flow Behavior and Flow Rate of Medium Viscosity Alginate for Scaffold Fabrication With a Three-Dimensional Bioplotter10.1115/1.4036226 ↗
41. Self-assembly of collagen fibers. Influence of fibrillar alignment and decorin on mechanical properties10.1016/S0006-3495(97)78247-X ↗