journal article·2018-12-11Open access

Superficial Characteristics of Titanium after Treatment of Chorreated Surface, Passive Acid, and Decontamination with Argon Plasma

María Rizo-Gorrita, Irene Luna-Oliva, María-Angeles Serrera-Figallo, Daniel Torres-Lagares

Abstract

(1) Background. Titanium is characterized by its biocompatibility, resistance to maximum stress, and fatigue and non-toxicity. The composition, surface structure, and roughness of titanium have a key and direct influence on the osseointegration processes when it is used in the form of dental implants. The objective of the present study is to characterize, at chemical, superficial, and biological levels, the result of the application of the sandblasted with large-grit and acid-etched (SLA) treatment consisting of coarse-grained and double-passivated acid blasting with subsequent decontamination with argon plasma on the surface of titanium implants type IV. (2) Methods. Four Oxtein® dental implants (Zaragoza, Spain) were investigated with the following coding: Code L63713T (titanium grade IV, 3.75 mm in diameter, and 13 mm in length). The surface of the implants was SLA type obtained from coarse-grained, double passivated acid, and decontaminated with argon plasma. The samples were in their sealed packages and were opened in our laboratory. The X-ray photoelectron spectroscopy (XPS) technique was used to characterize the chemical composition of the surface, and the scanning electronic microscope (SEM) technique was used to perform topographic surface evaluation. Cell cultures were also performed on both surfaces. (3) Results. The superficial chemical analysis of the studied samples presented the following components, approximately, expressed in atomic percentage: O: 39%; Ti: 18%; C: 39%; N: 2%; and Si: 1%. In the same way, the topographic analysis values were obtained in the evaluated roughness parameters: Ra: 1.5 μm ± 0.02%; Rq: 1.31 μm ± 0.33; Rz: 8.98 μm ± 0.73; Rp: 5.12 μm ± 0.48; Rv: 3.76 μm ± 0.51; and Rc: 4.92 μm ± 0.24. At a biological level, the expression of osteocalcin was higher (p < 0.05) on the micro-rough surface compared to that machined at 48 and 96 h of culture. (4) Conclusions. The data obtained in our study indicate that the total carbon content, the relative concentration of titanium, and the roughness of the treatment performed on the implants are in agreement with those found in the literature. Further, the roughness of the treatment performed on the implants throws a spongy, three-dimensional surface suitable for bone growth on it. The biological results found are compatible with the clinical use of the surface tested.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Dental School, University of Sevilla, 41009 Seville, Spain

Funding

Oxtein

References (55)

Show source-provided references
1. Intra-osseous anchorage of dental prostheses I. Experimental studies
2. In vivo metallic biomaterials and surface modification10.1016/S0921-5093(99)00101-X ↗
3. Interventions for replacing missing teeth: Different types of dental implants
4. Applications of polyetheretherketone (PEEK) in oral implantology and prosthodontics10.1016/j.jpor.2015.10.001 ↗
5. Bioactivity and osseointegration of PEEK are inferior to those of titanium: A systematic review10.1563/aaid-joi-D-16-00072 ↗
6. Mechanical properties, surface morphology and stability of a modified commercially pure high strength titanium alloy for dental implants10.1016/j.dental.2014.10.002 ↗
7. Removal torque value of titanium implants in the maxilla of miniature pigs
8. Torque and histomorphometric evaluation of c.p. titanium screws blasted with 25- and 75-um-sized particles of Al2O310.1002/(SICI)1097-4636(199602)30:2<251::AID-JBM16>3.0.CO;2-P ↗
9. Brunette, D.M., Tengvall, P., Textor, M., and Thomsen, P. (2011). Titanium in Medicine: Material Science, Surface Science, Engineering, Biological Responses and Medical Applications, Springer.
10. Brunette, D.M., Tengvall, P., Textor, M., and Thomsen, P. (2011). Mechanical, Thermal, chemical and Electrochemical Surface Teatment of Titanium. Titanium in Medicine: Material Science, Surface Science, Engineering, Biological Responses and Medical Applications, Springer.
11. Surface Teatment and Roughness Properties of Ti-based Biomaterials10.1023/B:JMSM.0000042679.28493.7f ↗
12. Engineering biocompatible implant surfaces. Part I: Materials and surfaces10.1016/j.pmatsci.2012.09.001 ↗
13. On implant surfaces: A review of current knowledge and opinions
14. Microscopic Study of Surface Microtopographic Characteristics of Dental Implants10.2174/1874210601610010139 ↗
15. Bone and soft tissue integration to titanium implants with different surface topography: An experimental study in the dog
16. Influence of surface characteristics on bone integration of titanium implants. A histomorphometric study in miniature pigs10.1002/jbm.820250708 ↗
17. Evaluation of modified titanium surfaces physical and chemical characteristics10.1016/j.nimb.2017.03.029 ↗
18. Oral implant surfaces: Part 1—Review focusing on topographic and chemical properties of different surfaces and in vivo responses to them
19. The influence of surface treatment on the implant roughness pattern10.1590/S1678-77572012000500010 ↗
20. XPS, AES and SEM analysis of recent dental implants10.1016/j.actbio.2009.01.049 ↗
21. Topographic characterisation of dental implants for commercial use
22. Effects of titanium surface topography on bone integration: A systematic review10.1111/j.1600-0501.2009.01775.x ↗
23. Surface Analysis of Titanium Cleaning and Activation Processes: Non-thermal Plasma Versus Other10.1007/s11090-014-9552-2 ↗
24. Bacterial inactivation/sterilization by argon plasma treatment on contaminated titanium implant surfaces: In vitro study10.4317/medoral.20845 ↗
25. Relationship between the surface chemical composition of implants and contact with the substrate10.1563/AAID-JOI-D-11-00227 ↗
26. Surface spectroscopic characterization of titanium material10.1016/0368-2048(95)02530-8 ↗
27. Bruschi, M., Steinmüller-Nethl, D., Goriwoda, W., and Rasse, M. (2015). Composition and Modifications of Dental Implant Surfaces. J. Oral Implant., 2015.10.1155/2015/527426 ↗
28. Vazouras, K. (2013). Surface Analysis of SLA and SLActive Dental Implants. [Ph.D. Thesis, University of Manchester].
29. Osseointegrated titanium implants. Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man10.3109/17453678108991776 ↗
30. Roy, M., Pompella, A., Kubacki, J., Szade, J., Roy, R.A., and Hedzelek, W. (2016). Photofunctionalization of titanium: An alternative explanation of its chemical-physical mechanism. PLoS ONE, 11.10.1371/journal.pone.0157481 ↗
31. Journey toward the Surface: How Glycine Adsorbs on Titania in Water Solution10.1021/jp3060729 ↗
32. Influence of Temperature and Acid Etching Time on the Superficial Characteristics of Ti10.1590/1516-1439.014115 ↗
33. Hydrocarbon Deposition Attenuates Osteoblast Activity on Titanium10.1177/0022034514536578 ↗
34. Different bone integration profiles of turned and acid-etched implants associated with modulated expression of extracellular matrix genes
35. Surface chemistry effects of topographic modification of titanium dental implant surfaces: 1. Surface analysis
36. Enhancing osteoblast-affinity of titanium scaffolds for bone engineering by use of ultraviolet light treatment10.2220/biomedres.36.55 ↗
37. Novel antioxidant capability of titanium induced by UV light treatment10.1016/j.biomaterials.2016.08.050 ↗
38. Ultraviolet photofunctionalization of titanium implants10.11607/jomi.te47 ↗
39. Yoshihara, C., Ueno, T., Chen, P., Tsutsumi, Y., Hanawa, T., and Wakabayashi, N. (2017). Inverse response of osteoblasts and fibroblasts to growth on carbon-deposited titanium surfaces. J. Biomed. Mater. Res. B Appl. Biomater.10.1002/jbm.b.33996 ↗
40. Photofunctionalization: A new method to bio-activate the titanium implant surface—Review of literature10.5604/00114553.1127421 ↗
41. Overcoming the biological aging of titanium using a wet storage method after ultraviolet treatment10.1038/s41598-017-04192-9 ↗
42. Bone response to surface-modified titanium implants: Studies on the early tissue response to implants with different surface characteristics
43. Henningsen, A., Smeets, R., Hartjen, P., Heinrich, O., Heuberger, R., Heiland, M., Precht, C., and Cacaci, C. (2017). Photofunctionalization and non-thermal plasma activation of titanium surfaces. Clin. Oral Investig.10.1007/s00784-017-2186-z ↗
44. Plasma of Argon Affects the Earliest Biological Response of Different Implant Surfaces10.1177/0022034516629119 ↗
45. Plasma of argon accelerates murine fibroblast adhesion in early stages of titanium disk colonization10.11607/jomi.2664 ↗
46. Soft tissue cell adhesion to titanium abutments after different cleaning procedures: Preliminary results of a randomized clinical trial10.4317/medoral.19329 ↗
47. Biological properties of acid etched titanium implants: Effect of sandblasting on bone anchorage
48. The biocompatibility of SLA-treated titanium implants10.1088/1748-6041/3/2/025011 ↗
49. Osteoblastic cell behaviour on modified titanium surfaces10.1016/j.micron.2017.11.010 ↗
50. Lagonegro, P., Trevisi, G., Nasi, L., Parisi, L., Manfredi, E., Lumetti, S., Rossi, F., Macaluso, G.M., Salviati, G., and Galli, C. (2017). Osteoblasts preferentially adhere to peaks on micro-structured titanium. Dent. Mater. J.10.4012/dmj.2017-008 ↗
51. Blatt, S., Pabst, A.M., Schiegnitz, E., Hosang, M., Ziebart, T., Walter, C., Al-Nawas, B., and Klein, M.O. (2017). Early cell response of osteogenic cells on differently modified implant surfaces: Sequences of cell proliferation, adherence and differentiation. J. Craniomaxillofac. Surg.10.1016/j.jcms.2017.12.021 ↗
52. Yokose, S., Klokkevold, P.R., Takei, H.H., Kadokura, H., Kikui, T., Hibino, Y., Shigeta, H., Nakajima, H., and Kawazu, H. (2017). Effects of surface microtopography of titanium disks on cell proliferation and differentiation of osteoblast-like cells isolated from rat calvariae. Dent. Mater. J.10.4012/dmj.2017-036 ↗
53. Influence of implant surface topography on bone-regenerative potential and mechanical retention in the human maxilla and mandible
54. Influence of acid-etching after grit-blasted on osseointegration of titanium dental implants: In vitro and in vivo studies10.1007/s10856-013-4935-0 ↗
55. A critical review of multifunctional titanium surfaces: New frontiers for improving osseointegration and host response, avoiding bacteria contamination10.1016/j.actbio.2018.08.013 ↗