journal article·2015-07-10Open access

Tubular Scaffold with Shape Recovery Effect for Cell Guide Applications

Kazi Hossain, Chenkai Zhu, Reda Felfel, Nusrat Sharmin, Ifty Ahmed

Abstract

Tubular scaffolds with aligned polylactic acid (PLA) fibres were fabricated for cell guide applications by immersing rolled PLA fibre mats into a polyvinyl acetate (PVAc) solution to bind the mats. The PVAc solution was also mixed with up to 30 wt % β-tricalcium phosphate (β-TCP) content. Cross-sectional images of the scaffold materials obtained via scanning electron microscopy (SEM) revealed the aligned fibre morphology along with a significant number of voids in between the bundles of fibres. The addition of β-TCP into the scaffolds played an important role in increasing the void content from 17.1% to 25.3% for the 30 wt % β-TCP loading, which was measured via micro-CT (µCT) analysis. Furthermore, µCT analyses revealed the distribution of aggregated β-TCP particles in between the various PLA fibre layers of the scaffold. The compressive modulus properties of the scaffolds increased from 66 MPa to 83 MPa and the compressive strength properties decreased from 67 MPa to 41 MPa for the 30 wt % β-TCP content scaffold. The scaffolds produced were observed to change into a soft and flexible form which demonstrated shape recovery properties after immersion in phosphate buffered saline (PBS) media at 37 °C for 24 h. The cytocompatibility studies (using MG-63 human osteosarcoma cell line) revealed preferential cell proliferation along the longitudinal direction of the fibres as compared to the control tissue culture plastic. The manufacturing process highlighted above reveals a simple process for inducing controlled cell alignment and varying porosity features within tubular scaffolds for potential tissue engineering applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Materials, Mechanics and Structures, Faculty of Engineering, University of Nottingham, University Park, Nottingham NG7 2RD, UK

Physics Department, Faculty of Science, Mansoura University, Mansoura 35516, Egypt

References (53)

Show source-provided references
1. Natural-origin polymers as carriers and scaffolds for biomolecules and cell delivery in tissue engineering applications10.1016/j.addr.2007.03.012 ↗
2. Reis, R.L., Neves, N.M., Mano, J.F., Gomes, M.E., Marques, A.P., and Azevedo, H.S. (2008). Natural-Based Polymers for Biomedical Applications, CRC Press LLC.
3. Narayan, R. (2009). Biomedical Materials, Springer.10.1007/978-0-387-84872-3 ↗
4. Synthetic polymer scaffolds for tissue engineering10.1039/b811392k ↗
5. Current progress in bioactive ceramic scaffolds for bone repair and regeneration10.3390/ijms15034714 ↗
6. Bioactive glass and glass-ceramic scaffolds for bone tissue engineering10.3390/ma3073867 ↗
7. Bioactive glass scaffolds for bone regeneration10.2113/GSELEMENTS.3.6.393 ↗
8. Mechanical properties of bioactive glass (13–93) scaffolds fabricated by robotic deposition for structural bone repair10.1016/j.actbio.2013.02.026 ↗
9. Tuning elasticity of open-cell solid foams and bone scaffolds via randomized vertex connectivity10.1002/adem.201100145 ↗
10. Zhou, C., Ma, L., Li, W., and Yao, D. (2011). Fabrication of tissue engineering scaffolds through solid-state foaming of immiscible polymer blends. Biofabrication, 3.10.1088/1758-5082/3/4/045003 ↗
11. Bioactive glass scaffolds for bone regeneration and their hierarchical characterisation10.1243/09544119JEIM836 ↗
12. In vivo characterisation of a novel bioresorbable poly(lactide-co-glycolide) tubular foam scaffold for tissue engineering applications10.1023/B:JMSM.0000030216.73274.86 ↗
13. Design and fabrication of tubular scaffolds via direct writing in a melt electrospinning mode10.1007/s13758-011-0013-7 ↗
14. Characterization and preparation of bio-tubular scaffolds for fabricating artificial vascular by combining electrospinning and 3D printing system10.1039/C4CP04801F ↗
15. Fabrication of tubular scaffolds with controllable fiber orientations using electrospinning for tissue engineering10.1002/mame.201400178 ↗
16. Aligned electrospun scaffolds and elastogenic factors for vascular cell-mediated elastic matrix assembly10.1002/term.470 ↗
17. Oriented lamellar silk fibrous scaffolds to drive cartilage matrix orientation: Towards annulus fibrosus tissue engineering10.1016/j.actbio.2012.05.023 ↗
18. Silk fibroin tissue engineering scaffolds with aligned electrospun fibers in multiple layers10.1039/C4RA05918B ↗
19. Facilitating tissue infiltration and angiogenesis in a tubular collagen scaffold10.1002/jbm.a.32568 ↗
20. Seamless vascularized large-diameter tubular collagen scaffolds reinforced with polymer knittings for esophageal regenerative medicine10.1089/ten.tec.2013.0485 ↗
21. Tissue compatibility of two biodegradable tubular scaffolds implanted adjacent to skin or buccal mucosa in mice10.1089/107632702760240562 ↗
22. Long-term results of cell-free biodegradable scaffolds for in situ tissue-engineering vasculature: In a canine inferior vena cava model10.1371/journal.pone.0035760 ↗
23. Collagen filaments as a scaffold for nerve regeneration10.1002/1097-4636(20010905)56:3<400::AID-JBM1109>3.0.CO;2-7 ↗
24. Types of neural guides and using nanotechnology for peripheral nerve reconstruction10.2147/IJN.S11883 ↗
25. Electrospun micro- and nanofiber tubes for functional nervous regeneration in sciatic nerve transections10.1186/1472-6750-8-39 ↗
26. Fabricating tubular scaffolds with a radial pore size gradient by a spinning technique10.1016/j.biomaterials.2005.07.012 ↗
27. Tendon tissue engineering and gene transfer: The future of surgical treatment10.1016/j.jhsa.2005.10.022 ↗
28. Electrospun synthetic polymer scaffold for cartilage repair without cultured cells in an animal model10.1016/j.arthro.2009.08.006 ↗
29. Electrospinning of highly porous scaffolds for cartilage regeneration10.1021/bm701225a ↗
30. Composite electrospun scaffolds for engineering tubular bone grafts10.1089/ten.tea.2009.0186 ↗
31. Polylactic acid fibre-reinforced polycaprolactone scaffolds for bone tissue engineering10.1016/j.biomaterials.2008.05.024 ↗
32. Silk-based electrospun tubular scaffolds for tissue-engineered vascular grafts10.1163/156856208784089607 ↗
33. Design of scaffolds for blood vessel tissue engineering using a multi-layering electrospinning technique10.1016/j.actbio.2005.06.006 ↗
34. Electrospinning of small diameter 3-D nanofibrous tubular scaffolds with controllable nanofiber orientations for vascular grafts10.1007/s10856-010-4164-8 ↗
35. Poly(DL-lactide-epsilon-caprolactone) nerve guides perform better than autologous nerve grafts10.1002/(SICI)1098-2752(1996)17:7<348::AID-MICR2>3.0.CO;2-C ↗
36. Poly(l-lactide) microfilaments enhance peripheral nerve regeneration across extended nerve lesions10.1002/jnr.10570 ↗
37. Laminin-coated poly(l-lactide) filaments induce robust neurite growth while providing directional orientation10.1002/1097-4636(20000915)51:4<625::AID-JBM10>3.0.CO;2-U ↗
38. Manufacture of porous biodegradable polymer conduits by an extrusion process for guided tissue regeneration10.1016/S0142-9612(98)00099-4 ↗
39. Mechanical, crystallisation and moisture absorption properties of melt drawn polylactic acid fibres10.1016/j.eurpolymj.2014.02.001 ↗
40. Effect of cellulose nanowhiskers on surface morphology, mechanical properties, and cell adhesion of melt-drawn polylactic acid fibers10.1021/bm5001444 ↗
41. The effect of cellulose nanowhiskers on the flexural properties of self-reinforced polylactic acid composites10.1016/j.reactfunctpolym.2014.09.012 ↗
42. Effect of porosity on the fluid flow characteristics and mechanical properties of tantalum scaffolds10.1002/jbm.b.30229 ↗
43. A review of particulate reinforcement theories for polymer composites10.1007/BF00580110 ↗
44. Bioresorbable devices made of forged composites of hydroxyapatite (HA) particles and poly-l-lactide (PLLA): Part I. Basic characteristics10.1016/S0142-9612(98)00241-5 ↗
45. Structure and properties of nano-hydroxyapatite/polymer composite scaffolds for bone tissue engineering10.1016/j.biomaterials.2003.12.005 ↗
46. Hess, A.E., Capadona, J.R., Shanmuganathan, K., Hsu, L., Rowan, S.J., Weder, C., Tyler, D.J., and Zorman, C.A. (2011). Development of a stimuli-responsive polymer nanocomposite toward biologically optimized, mems-based neural probes. J. Micromech. Microeng., 21.10.1088/0960-1317/21/5/054009 ↗
47. Stimuli-responsive polymer nanocomposites inspired by the sea cucumber dermis10.1126/science.1153307 ↗
48. Preparation of poly(vinyl acetate) modified by triethoxyvinylsilane and properties of copolymeric lattices
49. Polyvinyl acetate-based film coatings10.1016/j.ijpharm.2013.08.077 ↗
50. Sciatic nerve repair by reinforced nerve conduits made of gelatin-tricalcium phosphate composites10.1002/jbm.a.32973 ↗
51. Characteristics and biocompatibility of a biodegradable genipin-cross-linked gelatin/β-tricalcium phosphate reinforced nerve guide conduit10.1002/jbm.b.31705 ↗
52. Large-area irradiated low-level laser effect in a biodegradable nerve guide conduit on neural regeneration of peripheral nerve injury in rats10.1016/j.injury.2011.02.005 ↗
53. High cellulose nanowhisker content composites through cellosize bonding10.1039/c2sm26912k ↗