Formulation and Characterization of a New Injectable Bone Substitute Composed PVA/Borax/CaCO3 and Demineralized Bone Matrix
Source abstract
Abstract
The occurrence of bone-related disorders and diseases has dramatically increased in recent years around the world. Demineralized bone matrix (DBM) has been widely used as a bone implant due to its osteoinduction and bioactivity. However, the use of DBM is limited because it is a particulate material, which makes it difficult to manipulate and implant with precision. In addition, these particles are susceptible to migration to other sites. To address this situation, DBM is commonly incorporated into a variety of carriers. An injectable scaffold has advantages over bone grafts or preformed scaffolds, such as the ability to flow and fill a bone defect. The aim of this research was to develop a DBM carrier with such viscoelastic properties in order to obtain an injectable bone substitute (IBS). The developed DBM carrier consisted of a PVA/glycerol network cross-linked with borax and reinforced with CaCO3 as a pH neutralizer, porosity generator, and source of Ca. The physicochemical properties were determined by an injectability test, FTIR, SEM, and TGA. Porosity, degradation, bioactivity, possible cytotoxic effect, and proliferation in osteoblasts were also determined. The results showed that the developed material has great potential to be used in bone tissue regeneration.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Research Group GIBEC, Life Sciences Faculty, EIA University, Envigado 055420, Colombia
Research and Innovation Group in Chemical Formulations, Life Sciences Faculty, EIA University, Envigado 055420, Colombia
CECOLTEC, Medellín 050022, Colombia
Funding
Departamento Administrativo de Ciencia, Tecnología e Innovación (COLCIENCIAS)
References (89)
Show source-provided references
1. Osteoblast responses to injectable bone substitutes of kappa-carrageenan and nano hydroxyapatite10.1016/j.actbio.2018.10.023 ↗
2. Injectable and biodegradable hydrogels: Gelation, biodegradation and biomedical applications10.1039/C1CS15203C ↗
3. Injectable matrices and scaffolds for drug delivery in tissue engineering10.1016/j.addr.2007.03.013 ↗
4. Application of injectable silk fibroin/graphene oxide hydrogel combined with bone marrow mesenchymal stem cells in bone tissue engineering10.1016/j.colsurfa.2020.125318 ↗
5. Injectable Polypeptide Hydrogels with Tunable Microenvironment for 3D Spreading and Chondrogenic Differentiation of Bone-Marrow-Derived Mesenchymal Stem Cells10.1021/acs.biomac.6b00884 ↗
6. 3D gelatin-chitosan hybrid hydrogels combined with human platelet lysate highly support human mesenchymal stem cell proliferation and osteogenic differentiation10.1177/2041731419845852 ↗
7. Acid-responsive composite hydrogel platform with space-controllable stiffness and calcium supply for enhanced bone regeneration10.1016/j.cej.2020.125353 ↗
8. Chitosan based polymer/bioglass composites for tissue engineering applications10.1016/j.msec.2018.12.026 ↗
9. Injectable chitosan-nano bioglass composite hemostatic hydrogel for effective bleeding control10.1016/j.ijbiomac.2019.01.220 ↗
10. Fabrication of biocompatible antibacterial nanowafers based on HNT/PVA nanocomposites loaded with minocycline for burn wound dressing10.1016/j.msec.2020.110685 ↗
11. Biogenic synthesis of silver nanoparticles and evaluation of physical and antimicrobial properties of Ag/PVA/starch nanocomposites hydrogel membranes for wound dressing application10.1016/j.jddst.2019.05.016 ↗
12. Surface modification of electrospun PVA/chitosan nanofibers by dielectric barrier discharge plasma at atmospheric pressure and studies of their mechanical properties and biocompatibility10.1016/j.ijbiomac.2018.03.115 ↗
13. Super flexible, fatigue resistant, self-healing PVA/xylan/borax hydrogel with dual-crosslinked network10.1016/j.ijbiomac.2021.01.038 ↗
14. Toxicity of boric acid, borax and other boron containing compounds: A review10.1016/j.yrtph.2021.104873 ↗
15. Dynamic light scattering and dynamic viscoelasticity of poly(vinyl alcohol) in aqueous borax solutions. 5. Temperature effects10.1021/ma990493w ↗
16. Microrheological study of PVA/borax physical gels: Effect of chain length and elastic reinforcement by sodium hydroxide addition10.1016/j.molliq.2019.111272 ↗
17. Conformation of dilute poly(vinyl alcohol)-borax complex by asymmetric flow field-flow fractionation10.1016/j.chroma.2020.461260 ↗
18. Light scattering and viscoelasticity study of poly(vinyl alcohol)-borax aqueous solutions and gels10.1016/j.polymer.2005.04.074 ↗
19. A pH-Triggered, Self-Assembled, and Bioprintable Hybrid Hydrogel Scaffold for Mesenchymal Stem Cell Based Bone Tissue Engineering
20. pH-responsive injectable hydrogels with mucosal adhesiveness based on chitosan-grafted-dihydrocaffeic acid and oxidized pullulan for localized drug delivery10.1016/j.jcis.2018.10.056 ↗
21. Kondiah, P.J., Choonara, Y.E., Kondiah, P.P.D., Marimuthu, T., Kumar, P., du Toit, L.C., and Pillay, V. (2016). A Review of Injectable Polymeric Hydrogel Systems for Application in Bone Tissue Engineering. Molecules, 21.10.3390/molecules21111580 ↗
22. Hydrogels for biomedical applications10.1016/j.addr.2012.09.010 ↗
23. Collagen immobilized PVA hydrogel-hydroxyapatite composites prepared by kneading methods as a material for peripheral cuff of artificial cornea10.1016/j.msec.2004.08.038 ↗
24. Evaluation of polyvinyl alcohol composite membranes containing collagen and bone particles10.1016/j.jmbbm.2015.04.005 ↗
25. Synthetic biodegradable hydrogel delivery of demineralized bone matrix for bone augmentation in a rat model10.1016/j.actbio.2014.07.011 ↗
26. Delivery of demineralized bone matrix powder using a thermogelling chitosan carrier10.1016/j.actbio.2011.10.030 ↗
27. Calcium Carbonate Nanoparticles; Potential in Bone and Tooth Disorders
28. In vitro degradation and cell response of calcium carbonate composite ceramic in comparison with other synthetic bone substitute materials10.1016/j.msec.2015.02.019 ↗
29. Degradation of synthetic polymeric scaffolds for bone and cartilage tissue repairs10.1039/b803718n ↗
30. Hikmawati, D., Maulida, H.N., Putra, A.P., Budiatin, A.S., and Syahrom, A. (2019). Synthesis and Characterization of Nanohydroxyapatite-Gelatin Composite with Streptomycin as Antituberculosis Injectable Bone Substitute. Int. J. Biomater., 2019.10.1155/2019/7179243 ↗
31. Synthesis and characterization of gelatin-PVP polymer composite scaffold for potential application in bone tissue engineering10.1016/j.eurpolymj.2019.07.007 ↗
32. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
33. Degradable photothermal bioactive glass composite hydrogel for the sequential treatment of tumor-related bone defects: From anti-tumor to repairing bone defects10.1016/j.cej.2021.129520 ↗
34. Morphology, mechanical properties, and shape memory effects of poly(lactic acid)/thermoplastic polyurethane blend scaffolds prepared by thermally induced phase separation10.1177/0021955X14525959 ↗
35. Biocompatiable silk fibroin/carboxymethyl chitosan/strontium substituted hydroxyapatite/cellulose nanocrystal composite scaffolds for bone tissue engineering10.1016/j.ijbiomac.2019.06.172 ↗
36. SaOS2 osteosarcoma cells as an in vitro model for studying the transition of human osteoblasts to osteocytes10.1007/s00223-014-9879-y ↗
37. Therapeutic neovascularization promoted by injectable hydrogels
38. A simple and effective approach to prepare injectable macroporous calcium phosphate cement for bone repair: Syringe-foaming using a viscous hydrophilic polymeric solution10.1016/j.actbio.2015.11.055 ↗
39. Injectability of calcium phosphate pastes10.1016/j.biomaterials.2004.05.010 ↗
40. Shaw, D.H. (2017). Drugs Acting on the Gastrointestinal Tract. Pharmacology and Therapeutics for Dentistry: Seventh Edition, Elsevier.10.1016/B978-0-323-39307-2.00028-X ↗
41. Oyeneyin, B. (2015). Introduction to the Hydrocarbon Composite Production System, Elsevier.10.1016/B978-0-444-62637-0.00002-6 ↗
42. Effects of surface area and topography on 3D printed tricalcium phosphate scaffolds for bone grafting applications
43. Morphological and macrostructural studies of dog cranial bone demineralized with different acids10.1016/j.cap.2012.12.026 ↗
44. Nanoporous hydroxy-carbonate apatite scaffold made of natural bone10.1016/j.matlet.2006.01.104 ↗
45. Methylsilicon phthalocyanine hydroxide doped PVA films for optoelectronic applications: FTIR spectroscopy, electrical conductivity, linear and nonlinear optical studies10.1016/j.physb.2019.06.063 ↗
46. Tear propagation resistance of semicrystalline polymeric networks10.1016/0032-3861(77)90090-8 ↗
47. Structure and applications of poly(vinyl alcohol) hydrogels produced by conventional crosslinking or by freezing/thawing methods10.1007/3-540-46414-X_2 ↗
48. Novel associated hydrogels for nucleus pulposus replacement10.1002/jbm.a.10119 ↗
49. Novel crosslinking methods to design hydrogels10.1016/S0169-409X(01)00240-X ↗
50. The physical and chemical properties of the polyvinylalcohol/polyvinylpyrrolidone/hydroxyapatite composite hydrogel10.1016/j.msec.2015.10.081 ↗
51. Vibrational spectroscopy for imaging single microbial cells in complex biological samples10.3389/fmicb.2017.00675 ↗
52. Complex formation of boric acids with DI- and TRI- carboxylic acids and poly(vinyl alcohol) in aqueous solutions10.1002/masy.19971140141 ↗
53. High performances of dual network PVA hydrogel modified by PVP using borax as the structure-forming accelerator10.1080/15685551.2017.1382433 ↗
54. Estudio de la degradación térmica de poli(alcohol vinílico) mediante termogravimetría y termogravimetría diferencial
55. Characterization of blend polymer PVA-PVP complexed with ammonium thiocyanate10.1007/s11581-016-1672-7 ↗
56. Preparation and in vitro characterization of BC/PVA hydrogel composite for its potential use as artificial cornea biomaterial10.1016/j.msec.2009.10.006 ↗
57. Dielectric and Modulus spectra (Bode)—Studies on electrical conductivity and dielectric behaviour of PVdF–HFP–PMMA–NaI polymer blend electrolyte10.1007/s12034-012-0387-2 ↗
58. Preparation of a PVA/HAP composite polymer membrane for a direct ethanol fuel cell (DEFC)10.1007/s10800-008-9563-x ↗
59. A solvothermal method for synthesizing monolayer protected amorphous calcium carbonate clusters10.1039/C6CC03010F ↗
60. Porous calcite CaCO3 microspheres: Preparation, characterization and release behavior as doxorubicin carrier10.1016/j.colsurfb.2019.110720 ↗
61. Cellular materials as porous scaffolds for tissue engineering10.1016/S0079-6425(00)00018-9 ↗
62. Modulation of the inflammatory response for enhanced bone tissue regeneration10.1089/ten.teb.2008.0038 ↗
63. Minagar, S., Lin, J., Li, Y., Berndt, C.C., and Wen, C. (2017). Nanotopography and surface chemistry of TiO2-ZrO2-ZrTiO4 nanotubular surfaces and the influence on their bioactivity and cell responses. Metallic Foam Bone: Processing, Modification and Characterization and Properties, Woodhead Publishing.10.1016/B978-0-08-101289-5.00007-X ↗
64. De Odontología, F. (2014). Universidad Complutense de Madrid Tesis Doctoral un Composite Nuevo de Fosfato Cálcico-Silicato Cálcico Para la Regeneración Ósea: Caracterización Y Comportamiento Memoria Para Optar al Grado de Doctor Presentada Por Lucas Aparicio, Universidad Complutense de Madrid.
65. Mitochondrial biogenesis and metabolic hyperactivation limits the application of MTT assay in the estimation of radiation induced growth inhibition10.1038/s41598-018-19930-w ↗
66. Magneto-sensitive decellularized bone matrix with or without low frequency-pulsed electromagnetic field exposure for the healing of a critical-size bone defect10.1016/j.msec.2021.112065 ↗
67. Cartilage tissue engineering using injectable functionalized Demineralized Bone Matrix scaffold with glucosamine in PVA carrier, cultured in microbioreactor prior to study in rabbit model10.1016/j.msec.2020.111677 ↗
68. Strontium-rich injectable hybrid system for bone regeneration10.1016/j.msec.2015.10.038 ↗
69. In vitro characterization of an injectable in situ forming composite system for bone reconstruction10.1016/j.polymdegradstab.2015.05.001 ↗
70. Injectable preformed scaffolds with shape-memory properties10.1073/pnas.1211516109 ↗
71. Fabrication of calcium phosphate-calcium sulfate injectable bone substitute using hydroxy-propyl-methyl-cellulose and citric acid10.1007/s10856-010-4058-9 ↗
72. Acta Biomaterialia Critical review: Injectability of calcium phosphate pastes and cements10.1016/j.actbio.2016.11.019 ↗
73. Carbonated calcium phosphates are suitable pH-stabilising fillers for biodegradable polyesters10.1016/S0142-9612(02)00634-8 ↗
74. Aquino-Martínez, R., Artigas, N., Gámez, B., Rosa, J.L., and Ventura, F. (2017). Extracellular calcium promotes bone formation from bone marrow mesenchymal stem cells by amplifying the effects of BMP-2 on SMAD signalling. PLoS ONE, 12.10.1371/journal.pone.0178158 ↗
75. Bioactivity, cytocompatibility and thermal properties of experimental Bioglass-reinforced composites as potential root-canal filling materials10.1016/j.jmbbm.2017.01.022 ↗
76. Characterization and in vitro bioactivity study of a new glass ceramic from mica/apatite glass mixtures10.1016/j.jmrt.2020.05.074 ↗
77. The effect of calcium phosphate ceramic composition and structure on in vitro behavior. II. Precipitation10.1002/jbm.820270106 ↗
78. Calcium phosphates and bone induction
79. Bone grafts, bone substitutes and orthobiologics The bridge between basic science and clinical advancements in fracture healing10.4161/org.23306 ↗
80. Laurencin, C.T., and Jiang, T. (2014). Bone Graft Substitutes and Bone Regenerative Engineering, ASTM International. [2nd ed.].10.1520/MONO6-2ND-EB ↗
81. Rapid quantitative bioassay of osteoinduction10.1002/jor.1100180326 ↗
82. A review of osteoinductive testing methods and sterilization processes for demineralized bone10.1007/s10561-005-4252-z ↗
83. Osteoinductive biomaterials: Current knowledge of properties, experimental models and biological mechanisms10.22203/eCM.v021a31 ↗
84. Demineralized bone matrix as an osteoinductive biomaterial and in vitro predictors of its biological potential10.1002/jbm.b.31195 ↗
85. Pawelec, K.M., White, A.A., and Best, S.M. (2019). Properties and characterization of bone repair materials. Bone Repair Biomaterials, Elsevier.10.1016/B978-0-08-102451-5.00004-4 ↗
86. Identification of key genes and pathways associated with osteogenic differentiation of adipose stem cells10.1002/jcp.26943 ↗
87. Quantitative and sensitive in vitro assay for osteoinductive activity of demineralized bone matrix10.1016/S0736-0266(03)00005-6 ↗
88. Evaluation of long-term biocompatibility and osteogenic differentiation of graphene nanosheet doped calcium phosphate-chitosan AZ91D composites10.1016/j.msec.2018.04.082 ↗
89. Biological evaluation of bone substitute10.1016/j.cca.2020.08.017 ↗