journal article·2016-03-25Open access

Glass Polyalkenoate Cements Designed for Cranioplasty Applications: An Evaluation of Their Physical and Mechanical Properties

Basel Khader, Declan Curran, Sean Peel, Mark Towler

Abstract

Glass polyalkenoate cements (GPCs) have potential for skeletal cementation. Unfortunately, commercial GPCs all contain, and subsequently release, aluminum ions, which have been implicated in degenerative brain disease. The purpose of this research was to create a series of aluminum-free GPCs constructed from silicate (SiO2), calcium (CaO), zinc (ZnO) and sodium (Na2O)-containing glasses mixed with poly-acrylic acid (PAA) and to evaluate the potential of these cements for cranioplasty applications. Three glasses were formulated based on the SiO2-CaO-ZnO-Na2O parent glass (KBT01) with 0.03 mol % (KBT02) and 0.06 mol % (KBT03) germanium (GeO2) substituted for ZnO. Each glass was then mixed with 50 wt % of a patented SiO2-CaO-ZnO-strontium (SrO) glass composition and the resultant mixtures were subsequently reacted with aqueous PAA (50 wt % addition) to produce three GPCs. The incorporation of Ge in the glass phase was found to result in decreased working (142 s to 112 s) and setting (807 s to 448 s) times for the cements manufactured from them, likely due to the increase in crosslink formation between the Ge-containing glasses and the PAA. Compressive (σc) and biaxial flexural (σf) strengths of the cements were examined at 1, 7 and 30 days post mixing and were found to increase with both maturation and Ge content. The bonding strength of a titanium cylinder (Ti) attached to bone by the cements increased from 0.2 MPa, when placed, to 0.6 MPa, after 14 days maturation. The results of this research indicate that Germano-Silicate based GPCs have suitable handling and mechanical properties for cranioplasty fixation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Facial Trauma and Fracture Management

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical & Industrial Engineering, Ryerson University, Toronto, ON M5B 2K3, Canada

Division of Oral & Maxillofacial Surgery & Anaesthesia, Faculty of Dentistry, University of Toronto, Toronto, ON M5G 1G6, Canada

Funding

financial assistance of the Collaborative Health Research Project, CIHR/NSERC

References (55)

Show source-provided references
1. The use of miniplates in craniomaxillofacial surgery10.1097/00006534-198701000-00005 ↗
2. Titanium in cranioplasty10.3171/jns.1965.22.3.0292 ↗
3. Analysis of strength and bone conduction of hydroxyapatite ceramics
4. Orbital reconstruction with hydroxyapatite ceramic implants10.3109/02844319409015980 ↗
5. Development of titanium fixation screw for hydroxyapatite osteosynthesis (APACERAM)10.1016/j.surneu.2007.10.021 ↗
6. Boyd, D. (2005). Zinc-Based Glass Polyalkenoate Cements for Skeletal Applications. [PhD. Thesis, College of Engineering, University of Limerick].
7. Biomaterials in craniofacial reconstruction10.1016/j.cps.2004.03.001 ↗
8. Surface characteristics of fractured poly (methyl methacrylate)10.1038/185091a0 ↗
9. A fractographic investigation of PMMA bone cement focusing on the relationship between porosity reduction and increased fatigue life10.1002/jbm.820260507 ↗
10. CT and MR appearance of cervical acrylic struts10.1097/00004728-199105000-00039 ↗
11. Acrylic frontal cranioplasty10.1002/hed.2890090107 ↗
12. Late surgical treatment of unilateral coronal synostosis using methyl methacrylate10.3171/jns.1987.66.6.0793 ↗
13. The processing, mechanical properties and bioactivity of strontium based glass polyalkenoate cements10.1007/s10856-007-3287-z ↗
14. Rigid mesh fixation for alloplastic cranioplasty10.1097/00001665-199409000-00016 ↗
15. Acrylic cranioplasty using miniplate struts10.1097/00006123-199610000-00020 ↗
16. A technique for rigid fixation of methyl methacrylat cranioplasty: The vault-locking method10.1016/S0090-3019(99)00059-2 ↗
17. In situ cranioplasty with methylmethacrylate and wire lattice10.1080/02688690500390250 ↗
18. Methyl methacrylate cranioplasty in children: Long-term results10.1159/000121158 ↗
19. Materials and Technologies for Craniofacial Tissue Repair and Regeneration
20. Tissues and bone adhesives-historical aspects10.1016/S0142-9612(98)00059-3 ↗
21. Zinc ion release from novel hard tissue biomaterials
22. Endotherapeutics: Serenocem Ear Cement and Granules. Available online: http://www.endotherapeutics.com.au/serenocem.
23. Invotec International®: Serenocem™ Ostologic Cement. Available online: http://www.mundinc.com/uploads/serenocem_otologic_cement.pdf.
24. A spectroscopic investigation into the setting and mechanical properties of titanium containing glass polyalkenoate cements10.1007/s10856-010-4089-2 ↗
25. Quantitative evaluation of antibacterial activities of metallic oxide powders (ZnO, MgO and CaO) by conductimetric assay10.1016/S0167-7012(03)00037-X ↗
26. Effect of Radiotherapy on the Radiopacity and Flexural Strength of a Composite Resin
27. The role of Sr2+ on the structure and reactivity of SrO–CaO–ZnO–SiO2 ionomer glasses10.1007/s10856-006-0060-7 ↗
28. Comparison of failure mechanisms for cements used in skeletal luting applications10.1007/s10856-009-3724-2 ↗
29. Varshneya, A.K. (1994). Fundamentals of Inorganic Glasses, Gulf Professional Publishing Academic Press. [1st ed.].10.1016/B978-0-08-057150-8.50025-2 ↗
30. Novel adaptations to zinc-silicate glass polyalkenoate cements: The unexpected influences of germanium based glasses on handling characteristics and mechanical properties10.1016/j.jmbbm.2013.03.012 ↗
31. Development and evaluation of an inherently radiopaque, adhesive bone cement for vertebroplasty10.1016/j.jvir.2013.01.485 ↗
32. The effect of composition and annealing on the properties of aluminum free GPCs: A preliminary evaluation10.1016/j.matlet.2014.05.025 ↗
33. Composition-structure-property relationships for non-classical ionomer cements formulated with zinc-boron germanium-based glasses10.1177/0885328214557906 ↗
34. Zinc-based glass polyalkenoate cements with improved setting times and mechanical properties10.1016/j.actbio.2007.07.010 ↗
35. (2007). ISO 9917-1 Dentistry-Water-Based Cements-Part 1: Powder/Liquid Acid-Base Cements, ISO.
36. (1991). ISO 9917 Dentistry-Water-Based Cements-Part 1: Powder/Liquid Acid-Base Cements, ISO.
37. The effect of the disc support system on biaxial tensile strength of a glass ionomer cement10.1016/S0109-5641(01)00053-7 ↗
38. (2013). ASTM B348-13 Standard Specification for Titanium and Titanium Alloy Bars and Billets, ASTM International.
39. (2015). ASTM B265-15 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate, ASTM International.
40. The effect of mixing time on the handling and compressive strength of an encapsulated glass- ionomer cement10.1016/j.dental.2004.09.006 ↗
41. Aluminium-free glass polyalkenoate cements: Ion release and in vitro antibacterial efficacy10.1007/s10856-013-4880-y ↗
42. Titanium miniplates or stainless steel wire for cranial fixation: A prospective randomized comparison10.3171/jns.2002.96.2.0244 ↗
43. The Processing Mechanical Properties and Bioactivity of Zinc Based Glass ionomer Cements10.1007/s10856-005-3578-1 ↗
44. Influence of alkali metal ions on the fracture properties of glass polyalkenoate (ionomer) cements10.1016/S0142-9612(97)00129-4 ↗
45. Strontium-based Glass Polyalkenoate Cements for Luting Applications in the Skeleton10.1177/0885328208099085 ↗
46. Gallium containing glass polyalkenoate anti-cancerous bone cements: Glass characterization and physical properties10.1007/s10856-012-4624-4 ↗
47. West, A.R., and Baxter, H. (1993). Acid-Base Cements—Their Biomedical and Industrial Applications (Chemistry of Solid State Materials), Cambridge University Press.
48. The fracture properties of glass polyalkenoate cements as a function of cement age10.1007/BF00353190 ↗
49. Structural modes of a polymer in the repton model10.1063/1.3580287 ↗
50. Discretized model of entangled-polymer dynamics10.1103/PhysRevLett.59.1946 ↗
51. Tube theory of entangled polymer dynamics10.1080/00018730210153216 ↗
52. (2012). ASTM F640-12: 2012 Standard Test Methods for Determining Radiopacity for Medical Use, ASTM International.
53. Radiology Masterclass: Basics of X-ray Physics. Available online: http://www.radiologymasterclass.co.uk/tutorials/physics/X-ray_physics_densities.html.
54. Development of a novel aluminum-free glass ionomer cement based on magnesium/strontium-silicate glasses10.1016/j.msec.2014.06.006 ↗
55. (1992). ISO 5833:1992 Implants for Surgery Acrylic Resin Cements, ISO.