journal article·2012-10-16Open access

Cytocompatibility and Mechanical Properties of Short Phosphate Glass Fibre Reinforced Polylactic Acid (PLA) Composites: Effect of Coupling Agent Mediated Interface

Muhammad Sami Hasan, Ifty Ahmed, Andrew Parsons, Gavin Walker, Colin Scotchford

Abstract

In this study three chemical agents Amino-propyl-triethoxy-silane (APS), sorbitol ended PLA oligomer (SPLA) and Hexamethylene diisocyanate (HDI) were identified to be used as coupling agents to react with the phosphate glass fibre (PGF) reinforcement and the polylactic acid (PLA) polymer matrix of the composite. Composites were prepared with short chopped strand fibres (l = 20 mm, ϕ = 20 µm) in a random arrangement within PLA matrix. Improved, initial composite flexural strength (~20 MPa) was observed for APS treated fibres, which was suggested to be due to enhanced bonding between the fibres and polymer matrix. Both APS and HDI treated fibres were suggested to be covalently linked with the PLA matrix. The hydrophobicity induced by these coupling agents (HDI, APS) helped to resist hydrolysis of the interface and thus retained their mechanical properties for an extended period of time as compared to non-treated control. Approximately 70% of initial strength and 65% of initial modulus was retained by HDI treated fibre composites in contrast to the control, where only ~50% of strength and modulus was retained after 28 days of immersion in PBS at 37 °C. All coupling agent treated and control composites demonstrated good cytocompatibility which was comparable to the tissue culture polystyrene (TCP) control, supporting the use of these materials as coupling agent’s within medical implant devices.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Materials, Mechanics and Structures, Faculty of Engineering, University of Nottingham, University Park, Nottingham NG7 2RD, UK

References (47)

Show source-provided references
1. Biodegradable self-reinforced composite materials; Manufacturing structure and mechanical properties10.1016/0267-6605(92)90081-4 ↗
2. Bioabsorbable polymers: Materials technology and surgical applications10.1243/0954411981533872 ↗
3. Ultra-high-strength absorbable self-reinforced polyglycolide (SR-PGA) composite rods for internal fixation of bone fractures: In vitro and in vivo study10.1002/jbm.820250102 ↗
4. Fixation of zygomatic fractures with a biodegradable copolymer osteosynthesis system: Short- and long-term results10.1016/j.ijom.2004.03.020 ↗
5. Natural fibres: Can they replace glass in fibre reinforced plastics?10.1016/S0266-3538(03)00096-4 ↗
6. Processing, characterisation and biocompatibility of iron-phosphate glass fibres for tissue engineering10.1016/j.biomaterials.2003.10.013 ↗
7. Initial mechanical properties of phosphate-glass fibre-reinforced rods for use as resorbable intramedullary nails10.1007/s10853-012-6355-9 ↗
8. Calcium polyphosphate/polyvinyl acid-carbonate copolymer based composites for use in biodegradable load-bearing composites for orthopaedic implant fabrication10.4028/www.scientific.net/KEM.284-286.787 ↗
9. Investigation of crystallinity, molecular weight change, and mechanical properties of PLA/PBG bioresorbable composites as bone fracture fixation plate10.1177/0885328210384532 ↗
10. In vitro degradation, flexural, compressive and shear properties of fully bioresorbable composite rods10.1016/j.jmbbm.2011.05.016 ↗
11. Totally absorbable fiber reinforced composite for internal fracture fixation devices
12. Biocompatibility and mechanical properties of a totally absorbable composite material for orthopaedic fixation devices10.1002/jab.770030306 ↗
13. Retention of mechanical properties and cytocompatibility of a phosphate-based glass fiber/polylactic acid composite10.1002/jbm.b.31182 ↗
14. Degradable phosphate glass fiber reinforced polymer matrices: Mechanical properties and cell response10.1007/s10856-007-3147-x ↗
15. Surface treatment of phosphate glass fibers using 2-hydroxyethyl methacrylate: Fabrication of poly(caprolactone)-based composites10.1002/app.29050 ↗
16. Preparation and characterization of phosphate glass fibers and fabrication of poly(caprolactone) matrix resorbable composites10.1177/0731684409337554 ↗
17. Mechanical properties of a degradable phosphate glass fibre reinforced polymer composite for internal fracture fixation10.1016/j.msec.2010.04.017 ↗
18. Weight loss, ion release and initial mechanical properties of a binary calcium phosphate glass fibre/PCL composite10.1016/j.actbio.2008.03.018 ↗
19. Phosphate glass fibre composites for bone repair10.1016/S1672-6529(08)60132-8 ↗
20. Influence of compatibilizing agent molecular structure on the mechanical properties of phosphate glass fiber-reinforced PLA composites10.1002/pola.24086 ↗
21. Interfacial properties of phosphate glass fibres/PLA composites: Effect of the end functionalities of oligomeric PLA coupling agents10.1016/j.compscitech.2010.06.012 ↗
22. Characterization of silane-treated hydroxyapatite powders for use as filler in biodegradable composites10.1002/(SICI)1097-4636(199602)30:2<231::AID-JBM13>3.0.CO;2-P ↗
23. Effectiveness of silane treatment on absorbable microfibers10.1002/jab.770030305 ↗
24. Evaluation of surface treatments for glass fibers in composite materials10.1002/pen.760290809 ↗
25. Effect of silane coupling agent on mechanical interfacial properties of glass fiber-reinforced unsaturated polyester composites10.1002/polb.10359 ↗
26. Tailoring of interfaces in glass fiber reinforced polymer composites: A review10.1016/S0921-5093(00)01357-5 ↗
27. Effects of silane coupling agent and maleic anhydride-grafted polypropylene on the morphology and viscoelastic properties of polypropylene-mica composites10.1002/pc.20217 ↗
28. Haque, P. (2011). Oligomeric PLA Coupling Agents For Phosphate Glass Fibres/PLA Composites, The university of Nottingham.
29. Physical properties of artificial extracellular matrix protein films prepared by isocyanate crosslinking10.1016/S0142-9612(03)00635-5 ↗
30. A study on grafting and characterization of HMDI-modified calcium hydrogenphosphate10.1016/S0142-9612(01)00070-9 ↗
31. The effect of Gu-Sui-Bu (Drynaria fortunei J. Sm) immobilized modified calcium hydrogenphosphate on bone cell activities10.1016/S0142-9612(02)00372-1 ↗
32. Surface modification of bioactive glass nanoparticles and the mechanical and biological properties of poly(l-lactide) composites10.1016/j.actbio.2008.02.013 ↗
33. Composite biomaterials with chemical bonding between hydroxyapatite filler particles and PEG/PBT copolymer matrix10.1002/(SICI)1097-4636(19980605)40:3<490::AID-JBM20>3.0.CO;2-M ↗
34. Mechanical, degradation, and interfacial properties of synthetic degradable fiber reinforced polypropylene composites10.1177/0731684408100699 ↗
35. Effectiveness of 3-aminopropyl-triethoxy-silane as a coupling agent for phosphate glass fiber-reinforced poly(caprolactone)-based composites for fracture fixation devices10.1177/0892705710391622 ↗
36. Preparation of poly(ε-caprolactone)/continuous bioglass fibre composite using monomer transfer moulding for bone implant10.1016/j.biomaterials.2004.07.042 ↗
37. Hasan, M.S. (2012). Investigation of Coupling Agents Mediated Interfacial Integrity Improvements for Phosphate Glass Fibre Reinforced Composite for Bone Repair Applications Research. [PhD Diesseration, University of Nottingham].
38. Hydrolysis of polylactic acid (PLA) and polycaprolactone (PCL) in aqueous acetonitrile solutions: autocatalysis10.1023/A:1022826528673 ↗
39. Characterization and cytocompatibility of hybrid aminosilane-agarose hydrogel scaffolds10.1116/1.3388182 ↗
40. Biodegradability and cytocompatibility evaluation of surface modified calcium hydrogenphosphate
41. Concepts of osteoblast growth and differentiation: basis for modulation of bone cell development and tissue formation10.1177/10454411920030030501 ↗
42. Bioactivity and osteoblast responses of novel biomedical nanocomposites of bioactive glass nanofiber filled poly(lactic acid)10.1002/jbm.a.31339 ↗
43. Surface characterization and cell response of a PLA/CaP glass biodegradable composite material10.1002/jbm.a.31546 ↗
44. In vitro biocompatibility of bioresorbable polymers: Poly(L,DL-lactide) and poly(L-lactide-co-glycolide)10.1016/0142-9612(96)81421-9 ↗
45. In vitro and in vivo degradation of poly(D,L lactide/glycolide) type microspheres made by solvent evaporation method10.1016/0142-9612(89)90063-X ↗
46. Mechanical properties of biodegradable polymers and composites proposed for internal fixation of bone10.1002/jab.770010109 ↗
47. (GraphPad Software, version 3.02, 1992). GraphPad Software, version 3.02.