journal article·2026-01-29Open access

In Vitro Evaluation of the Performance of Self-Adhesive Resin Cements on Zirconia

Jiyoung Kwon, Hosung Lee, Hyun-Jung Kim, Kyoung-Kyu Choi

Abstract

This study evaluated the bond strength of self-adhesive resin cement (SARC) containing 10-methacryloyloxydecyl dihydrogen phosphate (MDP) and calcium silicate, with and without zirconia primer, before and after thermocycling. Sintered zirconia specimens (n = 180) were sequentially polished, sandblasted, and bonded with TheraCem (TC), Clearfil SA Luting (SA), or Rely X U200 (RU), with and without Z-Prime Plus primer. Specimens were stored in water at 37 °C or subjected to 10,000 thermocycles (5–55 °C). Shear bond strength (SBS), failure modes, fracture surfaces, flexural strength, and Vickers hardness were assessed. Bonding performance was governed by material-specific interactions rather than a complex three-factor interplay between resin cement type, primer application, and thermocycling. SBS followed the order TC > SA > RU and was significantly higher with primer application. Thermocycling significantly reduced SBS in all groups. Premature failure occurred in the RU and SA groups. Mixed failure was predominant across all conditions. The flexural strength and Vickers hardness were highest in the RU group, followed by the TC and SA groups, with RU maintaining significantly higher hardness even after thermocycling. Overall, SARCs containing MDP and calcium silicate demonstrated favorable bonding performance, which was further enhanced by zirconia primer application.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Endodontics and Root Canal Treatments · Drilling and Well Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Conservative Dentistry, Kyung Hee Dental Hospital, Seoul 02447, Republic of Korea

Department of Conservative Dentistry, Armed Forces Hongcheon Hospital, Hongcheon 25164, Republic of Korea

Department of Conservative Dentistry, School of Dentistry, Kyung Hee University, Seoul 02447, Republic of Korea

Funding

Kyung Hee University

References (58)

Show source-provided references
1. Physical, Mechanical, and Adhesive Properties of Novel Self-Adhesive Resin Cement10.1155/2022/4475394 ↗
2. Limited Etching Time Increases Self-Adhesive Resin Cement Adhesion to Enamel10.2341/20-033-L ↗
3. Heboyan, A., Vardanyan, A., Karobari, M.I., Marya, A., Avagyan, T., Tebyaniyan, H., Mustafa, M., Rokaya, D., and Avetisyan, A. (2023). Dental Luting Cements: An Updated Comprehensive Review. Molecules, 28.10.3390/molecules28041619 ↗
4. Effect of Wet vs. Dry Testing on the Mechanical Properties of Hydrophilic Self-Etching Primer Polymers10.1111/j.1600-0722.2007.00452.x ↗
5. Alqutaibi, A.Y., Ghulam, O., Krsoum, M., Binmahmoud, S., Taher, H., Elmalky, W., and Zafar, M.S. (2022). Revolution of Current Dental Zirconia: A Comprehensive Review. Molecules, 27.10.3390/molecules27051699 ↗
6. Different Strategies to Bond Bis-GMA–Based Resin Cement to Zirconia
7. Bonding to Zirconia Ceramic: Adhesion Methods and Their Durability10.1016/S0109-5641(98)00011-6 ↗
8. Adhesion/Cementation to Zirconia and Other Non-Silicate Ceramics: Where Are We Now?10.1016/j.dental.2010.10.022 ↗
9. Chemical Interaction Mechanism of 10-MDP with Zirconia10.1038/srep45563 ↗
10. Shen, D., Wang, H., Shi, Y., Su, Z., Hannig, M., and Fu, B. (2023). The Effect of Surface Treatments on Zirconia Bond Strength and Durability. J. Funct. Biomater., 14.10.3390/jfb14020089 ↗
11. Chemical Interaction of Glycero-Phosphate Dimethacrylate (GPDM) with Hydroxyapatite and Dentin10.1016/j.dental.2018.04.003 ↗
12. Etching Efficacy of Self-Etching Functional Monomers10.1177/0022034518763606 ↗
13. From Buonocore’s Pioneering Acid-Etch Technique to Self-Adhering Restoratives: A Status Perspective of Rapidly Advancing Dental Adhesive Technology
14. Carrilho, E., Cardoso, M., Marques Ferreira, M., Marto, C.M., Paula, A., and Coelho, A.S. (2019). 10-MDP-Based Dental Adhesives: Adhesive Interface Characterization and Adhesive Stability—A Systematic Review. Materials, 12.10.3390/ma12050790 ↗
15. Influence of Alkyl Chain Length on Phosphate Self-Assembled Monolayers10.1021/la700474v ↗
16. Extension of a One-Step Self-Etch Adhesive into a Multi-Step Adhesive10.1016/j.dental.2005.05.010 ↗
17. Dental Cements for Luting and Bonding Restorations: Self-Adhesive Resin Cements10.1016/j.cden.2017.06.006 ↗
18. Comparative Shear-Bond Strength of Six Dental Self-Adhesive Resin Cements to Zirconia10.3390/ma8063306 ↗
19. The Use of MDP-Based Materials for Bonding to Zirconia10.1016/j.prosdent.2014.01.016 ↗
20. The Effect of Sandblasting and Different Primers on Shear Bond Strength between Yttria-Tetragonal Zirconia Polycrystal Ceramic and a Self-Adhesive Resin Cement10.2341/13-149-L ↗
21. Zirconia Primers Improve the Shear Bond Strength of Dental Zirconia10.1111/jopr.13013 ↗
22. Calcium hydroxide, pH-neutralization and formulation of model self-adhesive resin cements10.1016/j.dental.2013.01.004 ↗
23. Hygroscopic Expansion Stress and pH Neutralization of Self-Adhesive Resin Cements10.1007/s00784-016-1947-4 ↗
24. Effects of MDP-Based Primers on Shear Bond Strength between Resin Cement and Zirconia
25. The Effect of Continuous Application of MDP-Containing Primer and Luting Resin Cement on Bond Strength to Tribochemical Silica-Coated Y-TZP10.5395/rde.2018.43.e19 ↗
26. Adhesive Bonding of Zirconia with Single-Liquid Acidic Primers and a Tri-n-Butylborane Initiated Acrylic Resin
27. Bonding of Resin-Based Luting Cements to Zirconia with and without the Use of Ceramic Priming Agents
28. Evaluation of the Shear Bond Strength of Resin Cement to Y-TZP Ceramic after Different Surface Treatments10.1002/sca.21142 ↗
29. Shear Bond Strength of MDP-Containing Self-Adhesive Resin Cement and Y-TZP Ceramics: Effect of Phosphate Monomer-Containing Primers10.1155/2015/389234 ↗
30. The Effect of Z-Prime on the Shear Bond Strength of Zirconia Ceramic to Dentin: In Vitro
31. Evaluation of the Microshear Bond Strength of MDP-Containing and Non–MDP-Containing Self-Adhesive Resin Cement on Zirconia Restoration10.2341/18-132-L ↗
32. Kuraray Noritake Dental Inc. (2013). CLEARFIL™ SA LUTING Technical Guide, Kuraray Noritake Dental Inc.
33. Flexural Strength, Elastic Modulus, and pH Profile of Self-Etch Resin Luting Cements10.1111/j.1532-849X.2007.00278.x ↗
34. Physical and Biological Properties of a Newly Developed Calcium Silicate-Based Self-Adhesive Cement
35. Evaluation of Flexural Strength of Resin Interim Restorations Impregnated with Various Types of Silane-Treated and Untreated Glass Fibres10.1016/j.mjafi.2012.06.015 ↗
36. Mechanical Properties of New Self-Adhesive Resin-Based Cement10.1016/j.jpor.2009.09.004 ↗
37. Effect of Flexural Strength of Orthodontic Resin Cement on Bond Strength of Metal Brackets to Enamel Surfaces10.1093/ejo/cjq044 ↗
38. Evaluation of Vickers Hardness and Depth of Cure of Six Composite Resins Photo-Activated with Different Polymerization Modes10.4103/0972-0707.97946 ↗
39. Fracture Toughness of Dental Ceramics: Comparison of Bending and Indentation Method10.1016/S0109-5641(01)00005-7 ↗
40. Investigating the Effect of Different Surface Treatments on Vickers Hardness and Flexural Strength of Zirconium and Lithium Disilicate Ceramics10.1111/jopr.12939 ↗
41. (2019). Dentistry—Polymer-Based Restorative Materials (Standard No. ISO 4049).
42. Valente, F., Mavriqi, L., and Traini, T. (2020). Effects of 10-MDP-Based Primer on Shear Bond Strength between Zirconia and New Experimental Resin Cement. Materials, 13.10.3390/ma13010235 ↗
43. Changes in Adhesive Strength and pH of Dental Universal Adhesive in Accordance with Varying Proportions of 10-MDP10.14815/kjdm.2023.50.4.281 ↗
44. Effect of 10-Methacryloxydecyl Dihydrogen Phosphate Concentration on Chemical Coupling of Methacrylate Resin to Yttria-Stabilized Zirconia
45. Stability of the Bond between Two Resin Cements and an Yttria-Stabilized Zirconia Ceramic after Six Months of Aging in Water10.1016/j.prosdent.2013.12.003 ↗
46. Effect of Different Artificial Aging Conditions on Ceramic–Composite Bond Strength
47. Effects of Primer Components of Silane and 10-Methacryloyloxydecyl Dihydrogen Phosphate on Resin Bonding to Tribochemical Silica-Coated Highly Translucent Zirconia10.1007/s00784-024-06024-3 ↗
48. Abdou, A., Hussein, N., Abd El-Sattar, N.E.A., Takagaki, T., Kusumasari, C., Rizk, A., and Abo-Alazm, E.A. (2023). MDP-Salts as an Adhesion Promoter with MDP-Primers and Self-Adhesive Resin Cement for Zirconia Cementation. BMC Oral Health, 23.10.1186/s12903-023-03663-y ↗
49. Analysis of Pre-Test Failures and Bond-Strengths of Seven Adhesive Systems to Bovine Dentine: A Nine-Year Novice/Beginner Operator Study10.1016/j.dental.2018.09.009 ↗
50. Effects of Pretreatment and Thermocycling on Bond Strength of Resin Core Materials to Various Fiber-Reinforced Composite Posts
51. Microtensile Bond Strength between Self-Adhesive Resin Cements and Resin-Based Ceramic CAD/CAM Block
52. pH Neutralization and Influence on Mechanical Strength in Self-Adhesive Resin Luting Agents10.1016/j.dental.2012.03.005 ↗
53. Coupling of 10-Methacryloyloxydecyldihydrogenphosphate to Tetragonal Zirconia: Effect of pH Reaction Conditions on Coordinate Bonding10.1016/j.dental.2015.06.014 ↗
54. Durability of Resin Bonding to Zirconia Using Products Containing 10-Methacryloyloxydecyl Dihydrogen Phosphate
55. Chen, L., Gleave, C., and Suh, B. (2017, January 22). New Self-Adhesive Resin Cement with Alkaline pH. Proceedings of the 2017 IADR/AADR/CADR General Session, San Francisco, CA, USA.
56. The Effects of Water on Degradation of the Zirconia–Resin Bond10.1016/j.jdent.2017.04.004 ↗
57. Influence of Cement Thickness on Resin–Zirconia Microtensile Bond Strength10.4047/jap.2011.3.3.119 ↗
58. Assessing Degradation of Composite Resin Cements during Artificial Aging by Martens Hardness10.1186/s13005-017-0142-4 ↗