Photo Crosslinkable Hybrid Hydrogels for High Fidelity Direct Write 3D Printing: Rheology, Curing Kinetics, and Bio-Scaffold Fabrication
Source abstract
Abstract
This work characterizes hybrid hydrogels prepared via the combination of natural and synthetic polymers. By incorporating a biocompatible compound, poly(ethylene glycol) diacrylate (PEGDA, Mn = 400), into alginate and carboxymethyl cellulose (CMC)-based hydrogels, the in situ UV crosslinking of these materials was assessed. A custom direct-write (DW) 3D bioprinter was utilized to prepare hybrid hydrogel constructs and scaffolds. A control sample, which consisted of 4% w/v alginate and 4% w/v CMC, was prepared and evaluated in addition to three PEGDA (4.5, 6.5, and 10% w/v)-containing hybrid hydrogels. Rotational rheology was utilized to evaluate the thixotropic behavior of these materials. Filament fusion tests were employed to generate bilayer constructs of various pore sizes, providing metrics for the printability and diffusion rate of hydrogels post-extrusion. Printability indicates the shape fidelity of pore geometry, whereas diffusion rate represents material spreading after deposition. Curing kinetics of PEGDA-containing hydrogels were evaluated using photo-Differential Scanning Calorimetry (DSC) and photorheology. The Kamal model was fitted to photo-DSC results, enabling an assessment and comparison of the curing kinetics for PEGDA-containing hydrogels. Photorheological results highlight the increase in hydrogel stiffness concomitant with PEGDA content. The range of obtained complex moduli (G*) provides utility for the development of brain, kidney, and heart tissue (620–4600 Pa). The in situ UV irradiation of PEGDA-containing hydrogels improved the shape fidelity of printed bilayers and decreased filament diffusion rates. In situ UV irradiation enabled 10-layer scaffolds with 1 × 1 mm pore sizes to be printed. Ultimately, this study highlights the utility of PEGDA-containing hybrid hydrogels for high-resolution DW 3D bioprinting and potential application toward customizable tissue analogs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: 3D Printing in Biomedical Research · Advanced Materials and Mechanics · Hydrogels: synthesis, properties, applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Biomedical Engineering, Rochester Institute of Technology, Rochester, NY 14623, USA
Department of Chemical Engineering, Rochester Institute of Technology, Rochester, NY 14623, USA
Department of Manufacturing and Mechanical Engineering Technology, Rochester Institute of Technology, Rochester, NY 14623, USA
Sustainable Product Design and Innovation, Keene State College, Keene, NH 03435, USA
References (58)
Show source-provided references
1. 3D bioactive composite scaffolds for bone tissue engineering
2. Scaffold-free trachea regeneration by tissue engineering with bio-3D printing10.1093/icvts/ivx444 ↗
3. Agarwal, S., Saha, S., Balla, V.K., Pal, A., Barui, A., and Bodhak, S. (2020). Current Developments in 3D Bioprinting for Tissue and Organ Regeneration–A Review. Front. Mech. Eng., 6.10.3389/fmech.2020.589171 ↗
4. 3D extrusion bioprinting10.1038/s43586-021-00073-8 ↗
5. Characterization of the Functional Properties of Polycaprolactone Bone Scaffolds Fabricated Using Pneumatic Micro-Extrusion10.1115/1.4051631 ↗
6. You, F., Eames, B.F., and Chen, X. (2017). Application of Extrusion-Based Hydrogel Bioprinting for Cartilage Tissue Engineering. Int. J. Mol. Sci., 18.10.3390/ijms18071597 ↗
7. Decellularized Rhesus Monkey Kidney as a Three-Dimensional Scaffold for Renal Tissue Engineering10.1089/ten.tea.2009.0602 ↗
8. Optimization of semisolid extrusion (pressure-assisted microsyringe)-based 3D printing process for advanced drug delivery application10.1016/j.stlm.2021.100008 ↗
9. Assessing bioink shape fidelity to aid material development in 3D bioprinting10.1088/1758-5090/aa90e2 ↗
10. Changes in scaffold porosity during bone tissue engineering in perfusion bioreactors considerably affect cellular mechanical stimulation for mineralization10.1016/j.bonr.2020.100265 ↗
11. Printability of Hydrogel Composites Using Extrusion-Based 3D Printing and Post-Processing with Calcium Chloride
12. 3D printed carboxymethyl cellulose scaffolds for autologous growth factors delivery in wound healing10.1016/j.carbpol.2021.118924 ↗
13. Abdulmaged, A.I., Soon, C.F., Talip, B.A., Zamhuri, S.A.A., Mostafa, S.A., and Zhou, W. (2022). Characterization of Alginate–Gelatin–Cholesteryl Ester Liquid Crystals Bioinks for Extrusion Bioprinting of Tissue Engineering Scaffolds. Polymers, 14.10.3390/polym14051021 ↗
14. Polyampholyte Hydrogels with pH Modulated Shape Memory and Spontaneous Actuation10.1002/adfm.201707245 ↗
15. Engineering alginate as bioink for bioprinting10.1016/j.actbio.2014.06.034 ↗
16. Hurtado, A., Aljabali, A.A.A., Mishra, V., Tambuwala, M.M., and Serrano-Aroca, Á. (2022). Alginate: Enhancement Strategies for Advanced Applications. Int. J. Mol. Sci., 23.10.3390/ijms23094486 ↗
17. Habib, A., Sathish, V., Mallik, S., and Khoda, B. (2018). 3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel. Materials, 11.10.3390/ma11030454 ↗
18. Chitosan hydrogels in 3D printing for biomedical applications10.1016/j.carbpol.2021.117768 ↗
19. Liu, Q., Li, Q., Xu, S., Zheng, Q., and Cao, X. (2018). Preparation and Properties of 3D Printed Alginate–Chitosan Polyion Complex Hydrogels for Tissue Engineering. Polymers, 10.10.3390/polym10060664 ↗
20. Flow cytometric cell cycle analysis of muscle precursor cells cultured within 3D scaffolds in a perfusion bioreactor10.1002/btpr.40 ↗
21. Optimized construction of a full thickness human skin equivalent using 3D bioprinting and a PCL/collagen dermal scaffold10.1016/j.bprint.2020.e00123 ↗
22. 3D bioprinted complex constructs reinforced by hybrid multilayers of electrospun nanofiber sheets10.1088/1758-5090/ab08c2 ↗
23. Printability Optimization of Gelatin-Alginate Bioinks by Cellulose Nanofiber Modification for Potential Meniscus Bioprinting10.1155/2020/3863428 ↗
24. 3D-printed gelatin scaffolds of differing pore geometry modulate hepatocyte function and gene expression10.1016/j.actbio.2017.12.042 ↗
25. Rheological behavior, 3D printability and the formation of scaffolds with cellulose nanocrystals/gelatin hydrogels10.1007/s10853-020-05128-x ↗
26. Rheological Analysis of Bio-ink for 3D Bio-printing Processes10.1016/j.jmapro.2022.02.048 ↗
27. Lima, T.d.P.L., Canelas, C.A.D.A., Concha, V.O.C., da Costa, F.A.M., and Passos, M.F. (2022). 3D Bioprinting Technology and Hydrogels Used in the Process. J. Funct. Biomater., 13.10.3390/jfb13040214 ↗
28. Viscoelastic analysis of single-component and composite PEG and alginate hydrogels10.1007/s10409-014-0025-x ↗
29. Effects of Irgacure 2959 and lithium phenyl-2,4,6-trimethylbenzoylphosphinate on cell viability, physical properties, and microstructure in 3D bioprinting of vascular-like constructs10.1088/1748-605X/ab954e ↗
30. de la Fuente, A.Z., García-García, A., Pérez-Álvarez, L., Moreno-Benítez, I., Larrea-Sebal, A., Martin, C., and Vilas-Vilela, J.L. (2024). Evaluation of Various Types of Alginate Inks for Light-Mediated Extrusion 3D Printing. Polymers, 16.10.3390/polym16070986 ↗
31. Greco, I., Machrafi, H., and Iorio, C.S. (2024). Double-Network Hydrogel 3D BioPrinting Biocompatible with Fibroblast Cells for Tissue Engineering Applications. Gels, 10.10.3390/gels10110684 ↗
32. Graphene nanoplatelets enhance neuronal differentiation of human bone marrow mesenchymal stem cells10.1186/s40659-025-00616-3 ↗
33. Printability of pulp derived crystal, fibril and blend nanocellulose-alginate bioinks for extrusion 3D bioprinting10.1088/1758-5090/ab0631 ↗
34. Dependence of propagation and termination rate constants on conversion for the radical polymerization of styrene in bulk as studied by ESR spectroscopy10.1021/ma00018a036 ↗
35. High-Conversion Free-Radical Bulk Polymerization of Styrene: Termination Kinetics Studied by Electron Spin Resonance, Fourier Transform Near-Infrared Spectroscopy, and Gel Permeation Chromatography10.1021/ma010560y ↗
36. Investigation of the radical polymerization kinetics using DSC and mechanistic or isoconversional methods10.1007/s10973-013-3633-y ↗
37. Thermo-Kinetic Analysis of Liquid Silicone Rubber10.4028/www.scientific.net/KEM.554-557.1634 ↗
38. Bakhshi, H., Kuang, G., Wieland, F., and Meyer, W. (2022). Photo-Curing Kinetics of 3D-Printing Photo-Inks Based on Urethane-Acrylates. Polymers, 14.10.3390/polym14152974 ↗
39. Ultraviolet cure kinetics of a low Tg polyurethane acrylate network under varying light intensity and exposure time10.1016/j.porgcoat.2021.106353 ↗
40. Real Time-NIR/MIR-Photorheology: A Versatile Tool for the in Situ Characterization of Photopolymerization Reactions10.1021/acs.analchem.7b00272 ↗
41. Dynamic photorheological analysis of photopolymerizable urethane dimethacrylate resins with varying diluent content and light fluence
42. Investigation of radical polymerization kinetics of poly(ethylene glycol) methacrylate hydrogels via DSC and mechanistic or isoconversional models10.1007/s10973-018-7535-x ↗
43. Autocatalytic curing kinetics of thermosetting polymers: A new model based on temperature dependent reaction orders10.1016/j.polymer.2010.05.056 ↗
44. Kinetic study of a phenolic-novolac resin curing process by rheological and DSC analysis10.1016/j.tca.2009.09.010 ↗
45. Kinetics and thermal characterization of thermoset cure10.1002/pen.760130110 ↗
46. Thermoset characterization for moldability analysis10.1002/pen.760140312 ↗
47. Effect of Azo and Peroxide Initiators on a Kinetic Study of Methyl Methacrylate Free Radical Polymerization by DSC10.1007/s13233-018-6047-6 ↗
48. The kinetic behavior of Liquid Silicone Rubber: A comparison between thermal and rheological approaches based on gel point determination10.1016/j.reactfunctpolym.2016.01.020 ↗
49. Lang, M., Hirner, S., Wiesbrock, F., and Fuchs, P. (2022). A Review on Modeling Cure Kinetics and Mechanisms of Photopolymerization. Polymers, 14.10.3390/polym14102074 ↗
50. A Review of Modeling of Diffusion Controlled Polymerization Reactions10.1002/mats.200700003 ↗
51. Toughening of photo-curable polymer networks: A review
52. A Kinetic Model for Radical Trapping in Photopolymerization of Multifunctional Monomers10.1021/ma0003351 ↗
53. Tissue Stiffness Dictates Development, Homeostasis, and Disease Progression10.1080/15476278.2015.1019687 ↗
54. Hydrogels with tunable stress relaxation regulate stem cell fate and activity10.1038/nmat4489 ↗
55. Extracellular-matrix tethering regulates stem-cell fate10.1038/nmat3339 ↗
56. Designing of Alginate-Based Tissue Scaffolds and Their Use in Mesenchymal Stem Cell Culture
57. Biological macromolecules Alginate-Carboxymethyl Cellulose (Alg-CMC) hydrogel loaded with Botulinum toxin type A for skin wound treatment and functional tissue regeneration10.1016/j.ijbiomac.2025.144668 ↗
58. Alginate and alginate composites for biomedical applications