journal article·2025-12-18Open access

Does Printing Orientation Matter in PolyJet 3D Printed Teeth for Endodontics? A Micro-CT Analysis

Cláudia Barbosa, Tiago Reis, José B. Reis, Margarida Franco, Catarina Batista, Rui B. Ruben, Benjamín Martín-Biedma, Jose Martín-Cruces

Journal of Functional Biomaterials· Volume 16· Issue 12

Abstract

This study aimed to identify the optimal printing orientation (X, Y, or Z axis) and positioning of a mandibular molar presenting an isthmus using PolyJet™ technology. The influence of these parameters on dimensional accuracy and on the behavior of 3D-printed teeth (3DPT) during endodontic preparation with ProTaper Gold® system was evaluated. Six groups (XA, XB, YA, YB, ZA, ZB; n = 10) were printed with different axis orientations and distinct isthmus positions relative to the build platform. All samples underwent micro-computed tomography scanning before and after endodontic preparation. Regarding preoperative analyses—canal volume, centroids, and total tooth volume and area—no significant differences were found between groups XA–YA or XB–YB (p > 0.05), supporting their comparability. In contrast, groups ZA and ZB differed significantly from all others (p < 0.05), failing to meet equivalence required for further comparison, and were therefore excluded. Postoperative evaluation—volume change, centroid displacement, transportation, and unprepared areas—revealed no significant differences between XA–YA and XB–YB. Within the limitations of this study, both printing orientation and position affected the accuracy and repeatability of 3DPT, with positioning exerting the greatest influence, while their behavior towards endodontic preparation remained consistent across orientations.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Endodontics and Root Canal Treatments · Dental materials and restorations · Orthodontics and Dentofacial Orthopedics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Endodontics and Restorative Dentistry Unit, School of Medicine and Dentistry, University of Santiago de Compostela, 15701 Santiago de Compostela, Spain

FP-I3ID, FP-BHS, Faculty of Health Sciences, University Fernando Pessoa, 4200-150 Porto, Portugal

RISE-Health, Faculty of Health Sciences, University Fernando Pessoa, Fernando Pessoa Teaching and Culture Foundation, 4200-150 Porto, Portugal

CDRSP, Polytechnic University of Leiria, 2430-028 Marinha Grande, Portugal

Faculty of Engineering, University of Porto, 4200-465 Porto, Portugal

Oral Sciences Research Group, Endodontics and Restorative Dentistry Unit, School of Medicine and Dentistry, University of Santiago de Compostela, Health Research Institute of Santiago de Compostela (IDIS), 15706 Santiago de Compostela, Spain

Funding

Fundação para a Ciência e a Tecnologia · ARISE

References (29)

Show source-provided references
1. Subbaiah, N.K., Chaudhari, P.K., Duggal, R., and Samrit, V.D. (2024). Effect of print orientation on the dimensional accuracy and cost-effectiveness of rapid-prototyped dental models using a PolyJet photopolymerization printer: An in vitro study. Int. Orthod., 22.10.1016/j.ortho.2024.100902 ↗
2. Krause, M., Marshall, A., Catterlin, J.K., Hornik, T., and Kartalov, E.P. (2024). Dimensional Fidelity and Orientation Effects of PolyJet Technology in 3D Printing of Negative Features for Microfluidic Applications. Micromachines, 15.10.3390/mi15030389 ↗
3. Post-printing processing and aging effects on Polyjet materials intended for the fabrication of advanced surgical simulators10.1016/j.jmbbm.2024.106598 ↗
4. PolyJet technology for product prototyping: Tensile strength and surface roughness properties10.1177/0954405413518515 ↗
5. Reis, T., Barbosa, C., Franco, M., Silva, R., Alves, N., Castelo-Baz, P., Martin-Cruces, J., and Martin-Biedma, B. (2024). Three-Dimensional Printed Teeth in Endodontics: A New Protocol for Microcomputed Tomography Studies. Materials, 17.10.3390/ma17081899 ↗
6. An evaluation of components manufactured from a range of materials, fabricated using PolyJet technology
7. Barclift, M., and Williams, C. (2012, January 6–8). Examining variability in the mechanical properties of parts manufactured via polyjet direct 3D printing. Proceedings of the 23rd Annual International Solid Freeform Fabrication Symposium—An Additive Manufacturing Conference, SFF 2012, Austin, TX, USA.
8. Medical 3D printing with polyjet technology: Effect of material type and printing orientation on printability, surface structure and cytotoxicity10.1186/s41205-023-00190-y ↗
9. Exploring variability of orientation and aging effects in material properties of multi-material jetting parts10.1108/RPJ-11-2015-0169 ↗
10. An experimental and theoretical investigation of surface roughness of poly-jet printed parts10.1080/17452759.2014.999218 ↗
11. Alghauli, M.A., Almuzaini, S.A., Aljohani, R., and Alqutaibi, A.Y. (2024). Impact of 3D printing orientation on accuracy, properties, cost, and time efficiency of additively manufactured dental models: A systematic review. BMC Oral Health, 24.10.1186/s12903-024-05365-5 ↗
12. Mechanical properties of parts fabricated with inkjet 3D printing through efficient experimental design10.1016/j.matdes.2015.07.129 ↗
13. Dimensional Accuracy Optimization of Prototypes produced by PolyJet Direct 3D Printing Technology
14. Reis, T., Barbosa, C., Franco, M., Baptista, C., Alves, N., Castelo-Baz, P., Martin-Cruces, J., and Martin-Biedma, B. (2022). 3D-Printed Teeth in Endodontics: Why, How, Problems and Future-A Narrative Review. Int. J. Environ. Res. Public Health, 19.10.3390/ijerph19137966 ↗
15. Creation of well-balanced experimental groups for comparative endodontic laboratory studies: A new proposal based on micro-CT and in silico methods10.1111/iej.13288 ↗
16. 3D printed replicas for endodontic education10.1111/iej.12964 ↗
17. Students’ perception of three-dimensionally printed teeth in endodontic training10.1111/eje.12743 ↗
18. Student’s Perception Towards Endodontic Training with Artificial Teeth: What Has Changed?10.14744/eej.2025.95867 ↗
19. A critical appraisal of research methods and experimental models for studies on root canal preparation10.1111/iej.13665 ↗
20. Evaluation of the Shaping Characteristics of ProTaper Gold, ProTaper NEXT, and ProTaper Universal in Curved Canals10.1016/j.joen.2015.07.009 ↗
21. Haghighi, A., Yang, Y., and Li, L. (2017, January 4–8). Dimensional Performance of As-Built Assemblies in Polyjet Additive Manufacturing Process. Proceedings of the ASME 2017 12th International Manufacturing Science and Engineering Conference, Los Angeles, CA, USA.10.1115/MSEC2017-2983 ↗
22. Accuracy analysis of additive technique for parts manufacturing10.17973/MMSJ.2016_11_2016169 ↗
23. Accuracy of three-dimensional dental resin models created by fused deposition modeling, stereolithography, and Polyjet prototype technologies: A comparative study10.2319/071117-460.1 ↗
24. Accuracy of three-dimensional printing for manufacturing replica teeth10.4041/kjod.2015.45.5.217 ↗
25. Multimethod analysis of three rotary instruments produced by electric discharge machining technology10.1111/iej.13915 ↗
26. Effects of Conservative Access and Apical Enlargement on Shaping and Dentin Preservation with Traditional and Modern Instruments: A Micro-computed Tomographic Study10.1016/j.joen.2023.01.004 ↗
27. Influence of NiTi alloy on the root canal shaping capabilities of the ProTaper Universal and ProTaper Gold rotary instrument systems10.1590/1678-77572016-0230 ↗
28. Shaping, and disinfecting abilities of ProTaper Universal, ProTaper Gold, and Twisted Files: A correlative microcomputed tomographic and bacteriologic analysis10.4103/endo.endo_186_22 ↗
29. Changes in root canal geometry after preparation assessed by high-resolution computed tomography10.1097/00004770-200101000-00001 ↗