journal article·2025-11-12Open access

3D-Printed Alginate–Chitosan Hydrogel Loaded with Cannabidiol as a Platform for Drug Delivery: Design and Mechanistic Characterization

Hernan Santiago Garzon, Camilo Alfonso-Rodríguez, João G. S. Souza, Lina J. Suárez, Daniel R. Suárez

Journal of Functional Biomaterials· Volume 16· Issue 11

Abstract

Alginate and chitosan (Ag/Cs) combined form an effective platform to develop biocompatible hydrogels with customizable properties for controlled drug release. Cannabidiol (CBD), a hydrophobic compound with anti-inflammatory and antibacterial effects, represents a powerful strategy to enhance their therapeutic performance. A/Cs hydrogels were produced using the CELLINK® printer with 12 and 24 mg/mL of CBD. SEM and FTIR were assessed. Viscoelasticity was assessed using oscillatory rheology. Structural strength was evaluated via uniaxial compression. Swelling and absorption were measured gravimetrically under physiological conditions. CBD was successfully incorporated into the 3D-printed A/Cs hydrogel. Increasing the CBD concentration led to mechanical changes such as a dose-dependent decrease in G′ and a slight reduction in the linearity threshold (typically 10–30% from medium loads), while still maintaining G′ > G″. FTIR showed shifts in O–H/N–H and C=O, indicating hydrogen bonding without new reactive bands. Microscopic images revealed moderate pore compaction and increased tortuosity with dose. At higher CBD concentrations, the hydrogel resisted compression but could deform further before failure. Equilibrium swelling and absorption kinetics decreased with increasing dose, resulting in a reduced initial burst and lower water uptake capacity. The CBD-loaded hydrogel provides a mechanically suitable and molecularly stable platform for local drug release in the oral cavity.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Cannabis and Cannabinoid Research · Hydrogels: synthesis, properties, applications · Pancreatic function and diabetes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Departamento de Periodoncia, Facultad de Odontología, Universidad Antonio Nariño, Bogotá 111511, Colombia

Departamento de Ciencias Básicas y Medicina Oral, Facultad de Odontología, Universidad Nacional de Colombia, Bogotá 110911, Colombia

Programa Doctorado en Ingeniería, Facultad de Ingeniería, Pontificia Universidad Javeriana, Bogotá 110231, Colombia

Biotechnology and Tissue Engineering Division, Novum Science, Zipaquirá 250252, Colombia

Dental Research Division, Guarulhos University, São Paulo 07023-070, Brazil

Faculdade Israelita de Ciências da Saúde Albert Einstein, Hospital Israelita Albert Einstein, São Paulo 05652-900, Brazil

Centro de Investigaciones Odontológicas, Facultad de Odontología, Pontificia Universidad Javeriana, Bogotá 110231, Colombia

Departamento de Ingeniería Industrial, Facultad de Ingeniería, Pontificia Universidad Javeriana, Bogotá 110231, Colombia

References (51)

Show source-provided references
1. Liu, J., Yang, L., Liu, K., and Gao, F. (2023). Hydrogel scaffolds in bone regeneration: Their promising roles in angiogenesis. Front. Pharmacol., 14.10.3389/fphar.2023.1050954 ↗
2. Garzón, H., Suárez, L.J., Muñoz, S., Cardona, J., Fontalvo, M., and Alfonso-Rodríguez, C.A. (2022). Biomaterials Used for Periodontal Disease Treatment: Focusing on Immunomodulatory Properties. Int. J. Biomater., 2022.10.1155/2022/7693793 ↗
3. Cardoso, S., Narciso, F., Monge, N., Bettencourt, A., and Ribeiro, I.A.C. (2023). Improving Chitosan Hydrogels Printability: A Comprehensive Study on Printing Scaffolds for Customized Drug Delivery. Int. J. Mol. Sci., 24.10.3390/ijms24020973 ↗
4. Management of bone diseases: Looking at scaffold-based strategies for drug delivery10.1007/s13346-022-01191-w ↗
5. Bai, L., Tao, G., Feng, M., Xie, Y., Cai, S., Peng, S., and Xiao, J. (2023). Hydrogel Drug Delivery Systems for Bone Regeneration. Pharmaceutics, 15.10.3390/pharmaceutics15051334 ↗
6. Li, X., Xu, M., Geng, Z., and Liu, Y. (2023). Functional hydrogels for the repair and regeneration of tissue defects. Front. Bioeng. Biotechnol., 11.10.3389/fbioe.2023.1190171 ↗
7. Li, X., Sun, Q., Li, Q., Kawazoe, N., and Chen, G. (2018). Functional hydrogels with tunable structures and properties for tissue engineering applications. Front. Chem., 6.10.3389/fchem.2018.00499 ↗
8. Raina, N., Pahwa, R., Bhattacharya, J., Paul, A.K., Nissapatorn, V., Pereira, M.d.L., Oliveira, S.M., Dolma, K.G., Rahmatullah, M., and Wilairatana, P. (2022). Drug Delivery Strategies and Biomedical Significance of Hydrogels: Translational Considerations. Pharmaceutics, 14.10.3390/pharmaceutics14030574 ↗
9. Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel-Based Bioinks10.1002/adhm.201901648 ↗
10. Vaquette, C., Mitchell, J., Fernandez-Medina, T., Kumar, S., and Ivanovski, S. (2021). Resorbable additively manufactured scaffold imparts dimensional stability to extraskeletally regenerated bone. Biomaterials, 269.10.1016/j.biomaterials.2021.120671 ↗
11. Decellularized and biological scaffolds in dental and craniofacial tissue engineering: A comprehensive overview10.1016/j.jmrt.2021.08.083 ↗
12. Computational methods for biofabrication in tissue engineering and regenerative medicine—A literature review10.1016/j.csbj.2023.12.035 ↗
13. Reddy, M.S.B., Ponnamma, D., Choudhary, R., and Sadasivuni, K.K. (2021). A comparative review of natural and synthetic biopolymer composite scaffolds. Polymers, 13.10.3390/polym13071105 ↗
14. Bone Bricks: The Effect of Architecture and Material Composition on the Mechanical and Biological Performance of Bone Scaffolds10.1021/acsomega.1c05437 ↗
15. Bone-derived dECM/alginate bioink for fabricating a 3D cell-laden mesh structure for bone tissue engineering10.1016/j.carbpol.2020.116914 ↗
16. Liu, Q., Li, Q., Xu, S., Zheng, Q., and Cao, X. (2018). Preparation and properties of 3D printed alginate-chitosan polyion complex hydrogels for tissue engineering. Polymers, 10.10.3390/polym10060664 ↗
17. Alginate-chitosan hydrogels provide a sustained gradient of sphingosine-1-phosphate for therapeutic angiogenesis
18. Application of chitosan/alginate nanoparticle in oral drug delivery systems: Prospects and challenges10.1080/10717544.2022.2058646 ↗
19. Incorporating inulin and chitosan in alginate-based microspheres for targeted delivery and release of quercetin to colon10.1016/j.foodres.2022.111749 ↗
20. Wei, L., Tan, J., Li, L., Wang, H., Liu, S., Chen, J., Weng, Y., and Liu, T. (2022). Chitosan/Alginate Hydrogel Dressing Loaded FGF/VE-Cadherin to Accelerate Full-Thickness Skin Regeneration and More Normal Skin Repairs. Int. J. Mol. Sci., 23.10.3390/ijms23031249 ↗
21. Effect of Alginate-chitosan Hydrogel Loaded with Curcumin and Chrysin on Lung and Breast Cancer Cell Lines10.2174/1567201818666210813142007 ↗
22. Atalay, S., Jarocka-karpowicz, I., and Skrzydlewskas, E. (2020). Antioxidative and anti-inflammatory properties of cannabidiol. Antioxidants, 9.10.3390/antiox9010021 ↗
23. Feldman, M., Smoum, R., Mechoulam, R., and Steinberg, D. (2020). Potential combinations of endocannabinoid/ endocannabinoid-like compounds and antibiotics against methicillin-resistant Staphylococcus aureus. PLoS ONE, 15.10.1371/journal.pone.0231583 ↗
24. Carmona Rendón, Y., Garzón, H.S., Bueno-Silva, B., Arce, R.M., and Suárez, L.J. (2023). Cannabinoids in Periodontology: Where Are We Now?. Antibiotics, 12.10.3390/antibiotics12121687 ↗
25. A novel antioxidant and anti-inflammatory carboxymethylcellulose/chitosan hydrogel loaded with cannabidiol promotes the healing of radiation-combined wound skin injury in the 60Co γ-irradiated mice10.1016/j.phymed.2025.156790 ↗
26. Lapmanee, S., Bhubhanil, S., Charoenphon, N., Inchan, A., Bunwatcharaphansakun, P., Khongkow, M., and Namdee, K. (2024). Cannabidiol-Loaded Lipid Nanoparticles Incorporated in Polyvinyl Alcohol and Sodium Alginate Hydrogel Scaffold for Enhancing Cell Migration and Accelerating Wound Healing. Gels, 10.10.3390/gels10120843 ↗
27. One-Pot Preparation of an Antioxidant, Anti-Inflammatory, and Analgesic Hydrogel for Oral Mucosal Lesions10.1021/acsami.5c06212 ↗
28. Qi, J., Zheng, Z., Hu, L., Wang, H., Tang, B., and Lin, L. (2022). Development and characterization of cannabidiol-loaded alginate copper hydrogel for repairing open bone defects in vitro. Colloids Surf. B Biointerfaces, 212.10.1016/j.colsurfb.2022.112339 ↗
29. Zheng, Z., Qi, J., Hu, L., Ouyang, D., Wang, H., Sun, Q., Lin, L., You, L., and Tang, B. (2022). A cannabidiol-containing alginate based hydrogel as novel multifunctional wound dressing for promoting wound healing. Biomater. Adv., 134.10.1016/j.msec.2021.112560 ↗
30. Monou, P.K., Mamaligka, A.M., Tzimtzimis, E.K., Tzetzis, D., Vergkizi-Nikolakaki, S., Vizirianakis, I.S., Andriotis, E.G., Eleftheriadis, G.K., and Fatouros, D.G. (2022). Fabrication and Preliminary In Vitro Evaluation of 3D-Printed Alginate Films with Cannabidiol (CBD) and Cannabigerol (CBG) Nanoparticles for Potential Wound-Healing Applications. Pharmaceutics, 14.10.3390/pharmaceutics14081637 ↗
31. Fabrication and characterization of oil-in-water emulsions stabilized by whey protein isolate/phloridzin/sodium alginate ternary complex10.1016/j.foodhyd.2022.107625 ↗
32. Recent Advances in Injectable Hydrogels for Controlled and Local Drug Delivery10.1002/adhm.202001341 ↗
33. Larrañeta, E., Stewart, S., Ervine, M., Al-Kasasbeh, R., and Donnelly, R.F. (2018). Hydrogels for Hydrophobic Drug Delivery. Classification, Synthesis and Applications. J. Funct. Biomater., 9.10.3390/jfb9010013 ↗
34. Cannabidiol-loaded microparticles embedded in a porous hydrogel matrix for biomedical applications10.1007/s10856-023-06773-9 ↗
35. Advances in engineering hydrogels10.1126/science.aaf3627 ↗
36. Rational Design and Applications of Hydrogels in Regenerative Medicine10.1002/adma.201303233 ↗
37. Fennell, E., and Huyghe, J.M. (2019). Chemically responsive hydrogel deformation mechanics: A review. Molecules, 24.10.3390/molecules24193521 ↗
38. Jo, H., Yoon, M., Gajendiran, M., and Kim, K. (2020). Recent Strategies in Fabrication of Gradient Hydrogels for Tissue Engineering Applications. Macromol. Biosci., 20.10.1002/mabi.201900300 ↗
39. The injectable hydrogel loading cannabidiol to regulate macrophage polarization in vitro for the treatment of chronic enteritis
40. Biofabrication Strategies for Oral Soft Tissue Regeneration10.1002/adhm.202304537 ↗
41. Chitosan and alginate polyelectrolyte complex membranes and their properties for wound dressing application10.1007/s10856-010-3996-6 ↗
42. FTIR and Raman spectroscopic characterization of cannabinoids10.1139/cjc-2021-0352 ↗
43. Thai, H., Thuy Nguyen, C., Thi Thach, L., Thi Tran, M., Duc Mai, H., Thi Thu Nguyen, T., Duc Le, G., Van Can, M., Dai Tran, L., and Long Bach, G. (2020). Characterization of chitosan/alginate/lovastatin nanoparticles and investigation of their toxic effects in vitro and in vivo. Sci. Rep., 10.10.1038/s41598-020-57666-8 ↗
44. Buczek, A., Rzepiela, K., Kupka, T., and Broda, M.A. (2025). Impact of O-H···π Hydrogen Bond on IR and NMR Parameters of Cannabidiol: Theoretical and Experimental Study. Molecules, 30.10.2139/ssrn.5237624 ↗
45. Designing hydrogels for controlled drug delivery10.1038/natrevmats.2016.71 ↗
46. Mohapatra, S., Mirza, M.A., Hilles, A.R., and Zakir, F. (2021). Biomedical Application, Patent Repository, Clinical Trial and Regulatory Updates on Hydrogel: An Extensive Review. Gels, 7.10.3390/gels7040207 ↗
47. Stimulus-responsive hydrogels: Theory, modern advances, and applications10.1016/j.mser.2015.04.001 ↗
48. Baines, D.K., Wright, K., and Douglas, T.E.L. (2024). Preliminary In Vitro Assessment of Whey Protein Isolate Hydrogel with Cannabidiol as a Potential Hydrophobic Oral Drug Delivery System for Colorectal Cancer Therapy. Polymers, 16.10.3390/polym16233273 ↗
49. Hydrogels with smart systems for delivery of hydrophobic drugs10.1080/17425247.2017.1245290 ↗
50. Xu, Z., Chen, Y., Cao, Y., and Xue, B. (2024). Tough Hydrogels with Different Toughening Mechanisms and Applications. Int. J. Mol. Sci., 25.10.3390/ijms25052675 ↗
51. Tough Hydrogels for Load-Bearing Applications10.1002/advs.202307404 ↗