Optical and Mechanical Characteristics of One-Shade Composite Resins
Source abstract
Abstract
This study evaluated the optical and mechanical properties of two single-shade composite resins compared with a conventional multi-shade composite. Omnichroma (OM), Metafil Bulk Fill ONE (BO), and Filtek Z350XT (Z350) were tested. Color adjustment was assessed using A3, B1, and C4 background cavities, and ΔE00 values were calculated. The translucency parameter (TP) was measured, and the flexural strength, flexural modulus, and depth of cure (B/T ratio) were determined. OM and BO showed better color adjustment performance on brighter (B1) backgrounds and decreased matching on darker (C4) ones. OM maintained stable color adjustment across cavity depths, while BO showed improved adjustment in shallower cavities. Both exhibited higher TP values than Z350. The control group (Z350) had the highest flexural strength and modulus, though BO’s flexural strength was comparable. OM and BO showed sufficient mechanical strength and a greater depth of cure compared to Z350. Our study indicated that the one-shade composite resins OM and BO exhibited better color adjustment performance compared to conventional composite resins due to the influence of the surrounding shades, with a better adjustment ability on brighter backgrounds. Additionally, OM and BO demonstrated sufficient strength and a higher depth of cure compared to the control group.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Natural Fiber Reinforced Composites · Pigment Synthesis and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Conservative Dentistry, Graduate School, Kyung Hee University, Seoul 02447, Republic of Korea
Department of Conservative Dentistry, School of Dentistry, Kyung Hee University, Seoul 02447, Republic of Korea
Funding
Bio & Medical Technology Development Program of the National Research Foundation
References (37)
Show source-provided references
1. Direct Esthetic Restorations Based on Translucency and Opacity of Composite Resins10.1111/j.1708-8240.2010.00392.x ↗
2. The Blending Effect of Single-Shade Composite with Different Shades of Conventional Resin Composites-An In Vitro Study10.1055/s-0042-1744369 ↗
3. Shade Matching Potential of One-Shade Resin Composites used for Restoration Repair10.4012/dmj.2022-125 ↗
4. Organizing Color in Dentistry10.14219/jada.archive.1987.0315 ↗
5. Optical Behavior of One-Shaded Resin-based Composites10.1016/j.dental.2021.02.011 ↗
6. Color Adjustment Potential of Single-shade Resin Composite to Various-shade Human Teeth: Effect of Structural Color Phenomenon10.4012/dmj.2020-364 ↗
7. Does the Thickness of Universal-shade Composites Affect the Ability to Reflect the Color of Background Dentin?10.4012/dmj.2022-197 ↗
8. Color Adjustment Potential of Resin Composites: Optical Illusion or Physical Reality, a Comprehensive Overview10.1111/jerd.12843 ↗
9. Instrumental and Visual Evaluation of the Color Adjustment Potential of Different Single-shade Resin Composites to Human Teeth of Various Shades
10. Polymerization Shrinkage Stress Kinetics and Related Properties of Bulk-fill Resin Composites10.2341/13-017-L ↗
11. Bulk-fill Resin-based Composites: An In vitro Assessment of Their Mechanical Performance10.2341/12-395-L ↗
12. Bulk-fill Resin Composites: Polymerization Contraction, Depth of Cure, and Gap Formation10.2341/13-324-L ↗
13. Polymerization Shrinkage and Depth of Cure of Bulk-fill Resin Composites and Highly Filled Flowable Resin10.2341/13-307-L ↗
14. Kim, H.-J., Kwon, J., Kim, H.-J., Kim, R.-H., Kim, D.-S., and Jang, J.-H. (2025). Comparison of Polymerization Behaviors, Microhardness and Compressive Strength between Bulk-fill Resin and Dual-cured Core Resin. BMC Oral Health, 25.10.1186/s12903-025-06353-z ↗
15. The Development of the CIE 2000 Colour-Difference Formula: CIEDE200010.1002/col.1049 ↗
16. Translucency Thresholds for Dental Materials10.1016/j.dental.2018.05.001 ↗
17. (2019). Dentistry—Polymer-Based Restorative Materials (Standard No. ISO 4049:2019).
18. Yılmaz Atalı, P., Doğu Kaya, B., Manav Özen, A., Tarçın, B., Şenol, A.A., Tüter Bayraktar, E., Korkut, B., Bilgin Göçmen, G., Tağtekin, D., and Türkmen, C. (2022). Assessment of Micro-Hardness, Degree of Conversion, and Flexural Strength for Single-Shade Universal Resin Composites. Polymers, 14.10.3390/polym14224987 ↗
19. Color, Lightness, Chroma, Hue, and Translucency Adjustment Potential of Resin Composites using CIEDE2000 Color Difference Formula10.1111/jerd.12689 ↗
20. Color Difference Thresholds in Dentistry10.1111/jerd.12149 ↗
21. Comparison of Traditional and Low Sensitivity Whiteners10.2341/07-134 ↗
22. Color match using instrumental and visual methods for single, group, and multi-shade composite resins10.1111/jerd.12621 ↗
23. Evaluation of Color-matching Ability of a Structural Colored Resin Composite10.2341/20-002-L ↗
24. Effect of Filler Properties in Composite Resins on Light Transmittance Characteristics and Color10.4012/dmj.26.38 ↗
25. Evaluation of Structural Coloration of Experimental Flowable Resin Composites10.1111/jerd.12674 ↗
26. Color Match of Resin Composites to Intact Tooth Structure
27. The Effect of Refractive Index of Fillers and Polymer Matrix on Translucency and Color Matching of Dental Resin Composite
28. Effect of Aging and Fiber-reinforcement on Color Stability, Translucency, and Microhardness of Single-shade Resin Composites Versus Multi-shade Resin Composite10.1111/jerd.13125 ↗
29. Mechanical Properties of Contemporary Composite Resins and Their Interrelations10.1016/j.dental.2013.04.025 ↗
30. Comparison of Flexural Properties of Bulk-fill Restorative/Flowable Composites and Their Conventional Counterparts10.2341/18-133-L ↗
31. Mechanical properties and filler fraction of dental composites10.1016/0109-5641(89)90128-0 ↗
32. Mechanical and Optical Characterization of Single-shade Resin Composites Used in Posterior Teeth10.2341/22-112-L ↗
33. The Effect of Filler Loading and Morphology on the Mechanical Properties of Contemporary Composites10.1067/mpr.2002.125179 ↗
34. Light Transmittance and Micro-mechanical Properties of Bulk Fill vs. Conventional Resin Based Composites10.1007/s00784-013-1177-y ↗
35. Interfacial Properties and Bottom/top Hardness Ratio Produced by Bulk Fill Composites in Dentin Cavities10.1590/0103-6440201902741 ↗
36. Roubickova, A., Tichy, A., Vrbova, R., and Bradna, P. (2025). Indentation Size Effect in Knoop and Vickers Hardness Measurement of Dental Resin-based Composites. J. Mech. Behav. Biomed. Mater., 162.10.1016/j.jmbbm.2024.106823 ↗
37. Indentation Size Effect, Indentation Cracks and Microhardness Measurement of Brittle Crystalline Solids–Some Basic Concepts and Trends10.1002/crat.200900385 ↗