journal article·2025-10-31Open access

Phase-Pure Hydroxyapatite/β-Tricalcium Phosphate Scaffolds from Ultra-Pure Precursors: Composition Governs Porosity, Strength, and SBF Kinetics

Panuwat Monviset, Kasama Srirussamee, Anak Khantachawana, Parichart Naruphontjirakul

Journal of Functional Biomaterials· Volume 16· Issue 11

Abstract

Biphasic calcium phosphate (BCP)scaffolds comprising hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP) were produced from ultra-pure precursors and processed under an α-TCP–avoiding schedule (1100 °C, 2 h). Quantitative X-ray diffraction (Rietveld/Profex) detected no α-TCP above the ~1 wt% limit of detection and quantified post-sintering phase fractions (wt% HA/β-TCP): 99.26/0.74, 68.51/31.49, and 27.57/72.43. Across compositions, SEM/ImageJ yielded similar mean macropore sizes (≈71–80 µm), while open porosity increased with the HA fraction (27.5 ± 1.8%, 39.1 ± 2.0%, 57.1 ± 2.4%). Compressive strength decreased accordingly (1.07 ± 0.25, 0.24 ± 0.01, 0.05 ± 0.02 MPa), consistent with non-load-bearing use. In ISO-compliant simulated body fluid (28 d), medium pH remained stable (7.33–7.43); mass loss and early Ca2+ depletion increased with β-TCP content, consistent with more extensive surface apatite formation in β-TCP-rich scaffolds. Collectively, these data are consistent with a composition-dependent sequence—β-TCP content → densification/porosity → strength → degradation/apatite kinetics—within the tested conditions and inform parameter-based tuning of BCP scaffolds for non-load-bearing indications (e.g., alveolar ridge preservation, craniofacial void filling).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Biological Engineering Program, Faculty of Engineering, King Mongkut’s University of Technology Thonburi (KMUTT), Bangkok 10140, Thailand

Department of Biomedical Engineering, School of Engineering, King Mongkut’s Institute of Technology Ladkrabang (KMITL), Bangkok 10520, Thailand

Funding

King Mongkut’s University of Technology Thonburi · National Research Council of Thailand

References (37)

Show source-provided references
1. Autograft, Allograft, and Bone Graft Substitutes: Clinical Evidence and Indications for Use in the Setting of Orthopaedic Trauma Surgery10.1097/BOT.0000000000001420 ↗
2. Sohn, H.-S., and Oh, J.-K. (2019). Review of Bone Graft and Bone Substitutes with an Emphasis on Fracture Surgeries. Biomater. Res., 23.10.1186/s40824-019-0157-y ↗
3. Zhao, R., Yang, R., Cooper, P.R., Khurshid, Z., Shavandi, A., and Ratnayake, J. (2021). Bone Grafts and Substitutes in Dentistry: A Review of Current Trends and Developments. Molecules, 26.10.3390/molecules26103007 ↗
4. Properties of Osteoconductive Biomaterials: Calcium Phosphates10.1097/00003086-200202000-00009 ↗
5. Calcium Phosphate Ceramics in Bone Tissue Engineering: A Review of Properties and Their Influence on Cell Behavior10.1016/j.actbio.2013.06.014 ↗
6. β-Tricalcium Phosphate for Bone Substitution: Property-Relevant Design Parameters10.1016/j.actbio.2020.06.022 ↗
7. Duta, L., Dorcioman, G., and Grumezescu, V. (2021). A Review on Biphasic Calcium Phosphate Materials Derived from Fish Discards. Nanomaterials, 11.10.3390/nano11112856 ↗
8. The Influences of Different Ratios of Biphasic Calcium Phosphate and Collagen Augmentation on Posterior Lumbar Spinal Fusion in Rat Model10.3349/ymj.2017.58.2.407 ↗
9. Hydroxyapatite-Based Bone Substitutes in Maxillofacial Reconstruction: A Systematic Review
10. Enhancing Bone Repair with β-Tricalcium Phosphate–Based Composite Scaffolds: A Review of Material Design and Biological Performance
11. Park, J.Y., Kim, Y., Kim, J.H., and Wang, H. (2024). Clinical and Histologic Evaluation of 3D-Printed PCL/β-TCP Scaffolds for Alveolar Ridge Preservation in Humans. J. Clin. Med., 13.
12. Indurkar, A., Choudhary, R., Rubenis, K., and Locs, J. (2021). Advances in Sintering Techniques for Calcium Phosphates Ceramics. Materials, 14.10.3390/ma14206133 ↗
13. Trzaskowska, M., Vivcharenko, V., and Przekora, A. (2023). The Impact of Hydroxyapatite Sintering Temperature on Its Microstructural, Mechanical, and Biological Properties. Int. J. Mol. Sci., 24.10.3390/ijms24065083 ↗
14. Effects of Minor β-Calcium Pyrophosphate and Hydroxyapatite Impurities on the Properties of β-Tricalcium Phosphate
15. Reactivity of α-Tricalcium Phosphate Powders Is Affected by Minute Amounts of β-Calcium Pyrophosphate and by the Synthesis Temperature10.1016/j.oceram.2024.100647 ↗
16. Baino, F., and Yamaguchi, S. (2020). Advances in 3D-Printed Scaffolds for Bone Regeneration: Review and Challenges. Biomimetics, 5.
17. Biphasic Calcium Phosphate Scaffolds for Craniofacial Bone Repair: Composition-Dependent Mechanical and Biological Outcomes
18. Calcium Phosphates: A Key to Next-Generation In Vitro Bone Modeling10.1002/adhm.202401307 ↗
19. Interlaboratory Study on the Quantification of Calcium Phosphate Phases by Rietveld Refinement10.1017/S088571561500038X ↗
20. Döbelin, N. (2025, September 16). Profex User Manual—Part 2: Using Profex, Version 4.3, 25 January 2021. Available online: https://www.profex-xrd.org/wp-content/uploads/2022/04/Profex-BGMN-Part-2-Application-EN.pdf.
21. (2014). Implants for Surgery—In Vitro Evaluation for Apatite-Forming Ability of Implant Materials (Standard No. ISO 23317:2014). (Note: Superseded by ISO 23317:2025).
22. Berzina-Cimdina, L., and Borodajenko, N. (2012). Research of Calcium Phosphates Using Fourier Transform Infrared Spectroscopy. Infrared Spectroscopy—Materials Science, Engineering and Technology, InTech.10.5772/36942 ↗
23. FTIR monitoring of the growth of the carbonate containing apatite layers from simulated and natural body fluids10.1016/S0022-2860(99)00170-2 ↗
24. Carvalho, G.K., Farias, J.R.S., Lima, I.S., Nascimento, A.M., Neves, G.A., Menezes, R., Osajima, J.A., Braga, A., and Silva-Filho, E.C. (2022). HAp/β-TCP Biphasic Ceramics Obtained by the Pechini Method: An Antibacterial Approach. Minerals, 12.10.3390/min12121482 ↗
25. α-Tricalcium Phosphate: Synthesis, Properties and Biomedical Applications10.1016/j.actbio.2011.06.019 ↗
26. α-TCP-Based Calcium Phosphate Cements: A Critical Review10.1016/j.actbio.2022.08.040 ↗
27. High-temperature phase transformations of hydroxylap-atite and the formation of silicocarnotite in the hydroxylapatite–quartz–lime system studied in situ and in operan-do by Raman spectroscopy10.1007/s10853-022-07570-5 ↗
28. Sintering of Biphasic Calcium Phosphates10.1007/s10856-010-4032-6 ↗
29. Kondo, Y., Takahashi, H., and Takahashi, M. (2023). Effect of silicon dioxide nanoparticles on the sintering behavior and mechanical properties of β-tricalcium phosphate. Materials, 17.10.3390/ma17040797 ↗
30. Bioceramics of calcium orthophosphates10.1016/j.biomaterials.2009.11.050 ↗
31. Can bioactivity be tested in vitro with SBF solution?10.1016/j.biomaterials.2009.01.008 ↗
32. Wu, S.-C., Hsu, H.-C., Liou, S.-P., and Ho, W.-F. (2024). Phase Transformation and Mechanical Optimization of Hydroxyapatite Ceramics at Different Sintering Temperatures. Materials, 17.10.3390/ma17164062 ↗
33. (2025). Implants for Surgery—Materials—Simulated Body Fluid (SBF) Preparation Procedure and Test Method to Detect Apatite Formation in SBF for Initial Screening of Bone-Contacting Implant Materials (Standard No. ISO 23317:2025).
34. Biomechanics and Mechanobiology of Trabecular Bone10.1115/1.4029176 ↗
35. Density and mechanical properties of vertebral trabecular bone—A review10.1002/jsp2.1176 ↗
36. Phase composition of calcium phosphate materials affects bone formation by modulating osteoclastogenesis10.1016/j.actbio.2024.01.022 ↗
37. Accuracy in Rietveld quantitative phase analysis: A comparative study of strictly monochromatic Mo and Cu radiations10.1107/S1600576716003873 ↗