journal article·2025-10-27Open access

Influence of Machining, Polishing, and Glazing on Surface Properties and Biological Performance of Zirconia and Lithium Disilicate Dental Ceramics

Youngchae Cho, Min-Gu Cho, Jeong-Hyun Ryu, Ji-Yeong Kim, Sung-Hwan Choi, Hyungjoon Shim, Min-Ho Hong, Deuk Yong Lee

Journal of Functional Biomaterials· Volume 16· Issue 11

Abstract

Surface treatments play a crucial role in modifying the surface properties and biological performance of dental ceramics. This study investigated the effects of surface conditions on the wettability, cytocompatibility, and bacterial resistance of 4 mol% Y2O3-stabilized tetragonal zirconia polycrystal (4Y–TZP) and two lithium disilicate (Li2Si2O5) glass ceramics (Amber® Mill (AM) and Amber® Mill Abut-Crown (AC)). Human gingival fibroblast (HGF-1) responses and biofilm formation on the machined, polished, and glazed samples were evaluated. The polished 4Y–TZP sample exhibited the highest water contact angle (WCA; 71.3°), while that of the AC samples decreased as the sample was machined (58.4°), polished (46.8°), and glazed (14.0°). The wettability, cytocompatibility, and bacterial resistance of the dental ceramics were significantly influenced by material type and surface condition. Among the surface-treated samples, the glazed specimens exhibited the lowest WCA and bulk density; thus, wettability is an important factor for cell proliferation and bacterial resistance. Among all samples, HGF-1 cells adhered well to the glazed ceramics and significantly proliferated over time. Particularly, the 4Y–TZP and AC glazed samples exhibited the lowest biomass and strong resistance to biofilm formation and bacterial adhesion. Thus, the glaze dramatically affected HGF-1 cell growth and antibiofilm formation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of R&D Center, Hass Co., Ltd., 60, Haan-ro, Gwangmyeong 14322, Republic of Korea

Department of Orthodontics, Institute of Craniofacial Deformity, Yonsei University College of Dentistry, 50-1 Yonsei-ro, Seodaemun-gu, Seoul 03722, Republic of Korea

BK21 FOUR Project, Yonsei University College of Dentistry, 50-1 Yonsei-ro, Seodaemun-gu, Seoul 03722, Republic of Korea

Center for Systems Biology, Massachusetts General Hospital, 185 Cambridge Street, Boston, MA 02114, USA

Department of Dental Biomaterials and Research Institute of Oral Science, College of Dentistry, Gangneung-Wonju National University, Gangneung 25457, Republic of Korea

Funding

Ministry of Science and ICT · Ministry of SMEs and Startups · Ministry of Education (MOE) and Gangwon State

References (58)

Show source-provided references
1. Biocompatibility study of lithium disilicate and zirconium oxide ceramics for esthetic dental abutments10.5051/jpis.2016.46.6.362 ↗
2. Grasping the lithium hype: Insights into modern dental lithium silicate glass-ceramics10.1016/j.dental.2021.12.013 ↗
3. Optical properties, biaxial flexural strength, and reliability of new-generation lithium disilicate glass-ceramics after thermal cycling10.1111/jopr.13632 ↗
4. Crack-healing during two-stage crystallization of biomedical lithium (di)silicate glass-ceramics10.1016/j.dental.2019.05.013 ↗
5. Soft tissue adhesion of polished versus glazed lithium disilicate ceramic for dental applications10.1016/j.dental.2013.05.004 ↗
6. An overview of zirconia ceramics: Basic properties and clinical applications10.1016/j.jdent.2007.07.008 ↗
7. The integration of peri-implant soft tissues around zirconia abutments: Challenges and strategies
8. Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations10.1016/j.dental.2016.09.025 ↗
9. Evaluation of translucency, Marten’s hardness, biaxial flexural strength and fracture toughness of 3Y-TZP, 4Y-TZP and 5Y-TZP materials10.1016/j.dental.2020.11.007 ↗
10. Bacterial adhesion on commercially pure titanium and zirconium oxide disks: An in vivo human study10.1902/jop.2004.75.2.292 ↗
11. Bacterial colonization of zirconia ceramic surfaces: An in vitro and in vivo study
12. Pae, A., Lee, H., Kim, H., Kwon, Y., and Woo, A. (2009). Attachment and growth behaviour of human gingival fibroblasts on titanium and zirconia ceramic surfaces. Biomed. Mater., 4.10.1088/1748-6041/4/2/025005 ↗
13. Morphology, proliferation, and gene expression of gingival fibroblasts on Laser-Lok, titanium, and zirconia surfaces10.1007/s10103-016-1927-6 ↗
14. Wang, S., Zhao, Y., Breslawec, A.P., Liang, T., Deng, Z., Kuperman, L.L., and Yu, Q. (2023). Strategy to combat biofilms: A focus on biofilm dispersal enzymes. npj Biofilms Microbiomes, 9.10.1038/s41522-023-00427-y ↗
15. A scanning electron microscope study of cell adhesion and spreading in vitro10.1016/0014-4827(74)90248-1 ↗
16. Effect of surface wettability on protein adsorption and lateral diffusion. Analysis of data and a statistical model10.1016/0301-4622(93)E0090-R ↗
17. Lee, J., Son, K., and Lee, K. (2020). Marginal and internal fit of ceramic restorations fabricated using digital scanning and conventional impressions: A clinical study. J. Clin. Med., 9.10.3390/jcm9124035 ↗
18. Lee, K., Son, K., and Lee, K. (2020). Effects of trueness and surface microhardness on the fitness of ceramic crowns. Appl. Sci., 10.10.3390/app10051858 ↗
19. Comparison of fracture resistance of pressable metal ceramic custom implant abutments with CAD/CAM commercially fabricated zirconia implant abutments10.1016/S0022-3913(09)60043-3 ↗
20. A novel zwitterion incorporated nano-crystalline ceramic and polymer for bacterial resistant dental CAD-CAM block10.1016/j.jdent.2024.105054 ↗
21. Bioactive resin-based composite with surface pre-reacted glass-ionomer filler and zwitterionic material to prevent the formation of multi-species biofilm10.1016/j.dental.2019.06.004 ↗
22. Kim, D., Lee, M., Kim, J., Lee, D., Kwon, J., and Choi, S. (2019). Incorporation of zwitterionic materials into light-curable fluoride varnish for biofilm inhibition and caries prevention. Sci. Rep., 9.10.1038/s41598-019-56131-5 ↗
23. Kwon, J., Lee, M., Kim, J., Kim, D., Ryu, J., Jang, S., Kim, K., Hwang, C., and Choi, S. (2019). Novel anti-biofouling light-curable fluoride varnish containing 2-methacryloyloxyethyl phosphorylcholine to prevent enamel demineralization. Sci. Rep., 9.10.1038/s41598-018-38255-2 ↗
24. Effect of different surface treatments on retention and fracture strength of zirconia crowns over Ti-base zirconia abutments10.1016/j.heliyon.2024.e40164 ↗
25. Influence of water infiltration and flexural strength change with glazing treatment of dental porcelain10.17135/jdhs.2017.17.4.358 ↗
26. Cho, Y., Jeong, H., Kim, B., Jang, J., Song, Y., and Lee, D.Y. (2023). Electrospun poly(L-lactic acid)/gelatin hybrid polymer as a barrier to periodontal tissue regeneration. Polymers, 15.10.3390/polym15183844 ↗
27. Lee, D.Y. (2024). Gelatin enhances the wet mechanical properties of poly(D,L-lactic acid) membranes. Int. J. Mol. Sci., 25.10.3390/ijms25095022 ↗
28. Effect of gelatin content on degradation behavior of PLLA/gelatin hybrid membranes10.1007/s13770-024-00626-4 ↗
29. Roughness-driven compressive sensing AFM for accurate nanoscale surface characterization in functional material systems10.1016/j.matdes.2025.114351 ↗
30. Biocompatibility of polymer-infiltrated-ceramic-network (PICN) materials with human gingival fibroblasts (HGFs)10.1016/j.dental.2016.06.020 ↗
31. A new method using insert-based systems (IBS) to improve cell behavior study on flexible and rigid biomaterials10.1007/s10616-016-9964-3 ↗
32. Effect of strontium substitution on functional activity of phosphate-based glass10.1039/D3BM00610G ↗
33. Moch, M., and Leube, R. (2021). Hemidesmosome-related keratin filament bundling and nucleation. Int. J. Mol. Sci., 22.10.3390/ijms22042130 ↗
34. Evaluation of peri-implant tissue response according to the presence of keratinized mucosa10.1016/j.tripleo.2008.12.010 ↗
35. Plaque—Induced peri—Implantitis in the presence or absence of keratinized mucosa. An experimental study in monkeys10.1034/j.1600-0501.1995.060301.x ↗
36. Effect of “fast”-crystallization and simultaneous glazing on physicochemical properties of lithium-disilicate CAD/CAM ceramic10.1016/j.jdent.2024.105257 ↗
37. (2021). Geometrical Product Specifications (GPS)—Surface Texture: Profile—Part 2: Terms, Definitions and Surface Texture Parameters (Standard No. ISO 21920-2:2021).
38. (2012). Geometrical Product Specifications (GPS)—Surface Texture: Areal—Part 2: Terms, Definitions and Surface Texture Parameters (Standard No. ISO 25178-2:2012).
39. Influence of measurements on 3D roughness parameters
40. How to select the most relevant 3D roughness parameters of a surface10.1002/sca.21113 ↗
41. Bacterial adherence and biofilm formation on medical implants: A review10.1177/0954411914556137 ↗
42. Role of agr (RNAIII) in Staphylococcus aureus adherence to fibrinogen, fibronectin, platelets and endothelial cells under static and flow conditions10.1099/0022-1317-51-9-747 ↗
43. Bacterial biofilms: From the natural environment to infectious diseases10.1038/nrmicro821 ↗
44. Biofilms: A survival strategy of bacteria
45. Fouda, A.M., Stawarczyk, B., Özcan, M., Singer, L., and Bourauel, C. (2023). Impact of glazing on wear, fracture load, and optical properties of a new fully crystallized lithium disilicate ceramic material. J. Mech. Behav. Biomed. Mater., 146.10.1016/j.jmbbm.2023.106102 ↗
46. The effect of P2O5 on the crystallization and microstructure of glass-ceramics in the SiO2–Li2O–K2O–ZnO–P2O5 system
47. In vitro dentine tubule occlusion by a novel toothpaste containing calcium silicate and sodium phosphate10.1016/j.jjodo.2020.100024 ↗
48. Effects of surface roughness of ceria-stabilized zirconia/alumina nanocomposite on the morphology and function of human gingival fibroblasts10.4012/dmj.2019-435 ↗
49. The effects of using erbium, chromium-doped:yttrium-scandium-gallium-garnet laser on the surface modification, bacterial decontamination, and cell adhesion on zirconia discs: An in vitro study10.1007/s10103-021-03313-1 ↗
50. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic10.1016/S0109-5641(99)00070-6 ↗
51. Future prospects of zirconia for oral implants—A review10.4012/dmj.2019-151 ↗
52. Mechanical properties, phase stability, and biocompatibility of (Y,Nb)—TZP/Al2O3 composite abutments for dental implant10.1002/1097-4636(2000)53:4<438::AID-JBM19>3.0.CO;2-3 ↗
53. Bacterial biofilms: A common cause of persistent infections10.1126/science.284.5418.1318 ↗
54. Evidence for autolysin—Mediated primary attachment of Staphylococcus epidermidis to a polystyrene surface10.1046/j.1365-2958.1997.4101774.x ↗
55. Lee, M., Kim, J., Seo, J., Mangal, U., Cha, J., Kwon, J., and Choi, S. (2020). Resin-based sealant with bioactive glass and zwitterionic material for remineralisation and multi-species biofilm inhibition. Nanomaterials, 10.10.3390/nano10081581 ↗
56. Biaxial flexural strength and translucent characteristics of dental lithium disilicate glass ceramics with different translucencies10.1016/j.jpor.2019.04.007 ↗
57. Development and characterization of a simple perfused oral microcosm10.1111/j.1365-2672.2004.02483.x ↗
58. Designing energy-efficient separation membranes: Knowledge from nature for a sustainable future10.1016/j.advmem.2022.100031 ↗