Conversion and Tack-Curing of Light-Cured Veneer Luting Agents
Source abstract
Abstract
Light attenuation and excess handling of light-cured luting agents create problems in bonding veneer restorations. The aim of the present study was to assess the curing capacity of light-cured veneer luting agents (VLA) [Choice 2 (CH2), G-Cem Veneer (GCV), Panavia LC Veneer (PNV), PermaCem LC Veneer (PMS), and Variolink Esthetic LC (VEV)] under lithium disilicate veneers, in the presence or absence of touch-cure primers (Adhese Universal Bond DC for VEV, G Premio Bond + DCA Activator for GCV, and V5 Tooth Primer V5 for PNV) and to evaluate material setting under two tack-curing irradiation modes (contact, distant). The methods used were ATR–FTIR spectroscopy and Vickers hardness (VHN) tests (n = 5/product and test). According to the results, all materials cured under the ceramic demonstrated significantly lower DC% from the controls, with a ranking of VEV, CH2 > GCV, PMS, PNV. The primers improved DC% by 4–13% only in the veneer groups. Tack-curing in contact mode demonstrated conversion and hardness values ranging from 37% to 78% and 31% to 57% of the controls respectively, corresponding to a vitreous state. For the distant mode, very low conversion values were found (0–7% of the controls), with untraceable indentations. It can be concluded that low translucency veneers reduce conversion of VLAs, which can be improved by using touch-cure activators. Tack-curing, as instructed, creates vitrified materials, resulting in difficult removal of set excess, which implies the need for better standardization of the procedure.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Additive Manufacturing and 3D Printing Technologies · Photopolymerization techniques and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Fixed Prosthodontics, School of Dentistry, National and Kapodistrian University of Athens, 2 Thivon Str., 11527 Athens, Greece
Department of Biomaterials, School of Dentistry, National and Kapodistrian University of Athens, 2 Thivon Str., 11527 Athens, Greece
References (51)
Show source-provided references
1. Porcelain veneers: A review of the literature10.1016/S0300-5712(99)00066-4 ↗
2. Survival and complication rates of feldspathic, leucite-reinforced, lithium disilicate and zirconia ceramic laminate veneers: A systematic review and meta-analysis10.1111/jerd.13351 ↗
3. Assaf, A., Azer, S.S., Sfeir, A., Al-Haj Husain, N., and Özcan, M. (2023). Risk factors with porcelain laminate veneers experienced during cementation: A review. Materials, 16.10.3390/ma16144932 ↗
4. Laboratory processing methods and bonding to glass ceramics: Systematic review10.1016/j.ijadhadh.2023.103572 ↗
5. Meta-analysis of bonding effectiveness to zirconia ceramics10.1177/0022034514524228 ↗
6. Clinical performance of laminate veneers: A review of the literature10.2186/jpr.JPR_D_23_00151 ↗
7. Effect of different thicknesses of pressable ceramic veneers on polymerization of light-cured and dual-cured resin cements10.5005/jp-journals-10024-1688 ↗
8. Degree of conversion of resin-cements (light-cured/dual-cured) under different thicknesses of vitreous ceramics: Systematic review10.2186/jpr.JPR_D_20_00090 ↗
9. The effect of ceramic restoration shade and thickness on the polymerization of light- and dual-cure resin cements10.2341/10-206-L ↗
10. Pissaia, J.F., Guanaes, B.K.A., Kintopp, C.C.A., Correr, G.M., da Cunha, L.F., and Gonzaga, C.C. (2019). Color stability of ceramic veneers as a function of resin cement curing mode and shade: 3-year follow-up. PLoS ONE, 14.10.1371/journal.pone.0219183 ↗
11. Color stability of dual-cured and light-cured resin cements: A systematic review and meta-analysis of in vitro studies10.1111/jopr.13757 ↗
12. Photobleaching of camphorquinone during polymerization of dimethacrylate-based resins10.1016/j.dental.2009.08.010 ↗
13. Development of a low-color, color stable, dual cure dental resin10.1016/j.dental.2013.01.005 ↗
14. Polymerizable thioureas as innovative reducing agents for self-cured and dual-cured dental materials10.1016/j.dental.2022.04.027 ↗
15. Mazzitelli, C., Paolone, G., Sabbagh, J., Scotti, N., and Vichi, A. (2023). Color stability of resin cements after water aging. Polymers, 15.10.3390/polym15030655 ↗
16. Effect of various visible light photoinitiators on the polymerization and color of light-activated resins10.4012/dmj.28.454 ↗
17. The impact of inorganic fillers, organic content, and polymerization mode on the degree of conversion of monomers in resin-matrix cements for restorative dentistry: A scoping review10.1007/s00784-024-05829-6 ↗
18. Effect of base monomer’s refractive index on curing depth and polymerization conversion of photo-cured resin composites10.4012/dmj.24.403 ↗
19. Update on dental nanocomposites10.1177/0022034510363765 ↗
20. Correlation between clinical performance and degree of conversion of resin cements: A literature review10.1590/1678-775720140524 ↗
21. Polymerization contraction stress in dual-cure cements and its effect on interfacial integrity of bonded inlays10.1016/S0300-5712(02)00047-7 ↗
22. Influence of curing modes on conversion and shrinkage of dual-cure resin-cements10.1016/j.dental.2021.12.004 ↗
23. Rosenstiel, S.F., Land, M.F., and Fujimoto, J. (2016). Luting agents and cementation procedures. Contemporary Fixed Prosthodontics, Elsevier. [5th ed.].
24. Does tack curing luting cements affect the final cure?
25. Gaile, M., Papia, E., Zalite, V., Locs, J., and Soboleva, U. (2022). Resin cement residue removal techniques: In vitro analysis of marginal defects and discoloration intensity using micro-CT and stereomicroscopy. Dent. J., 10.10.3390/dj10040055 ↗
26. Es Sebar, L., Baldi, A., Comba, A., Sannino, I., Iannucci, L., Grassini, S., Shokuhfar, T., and Scotti, N. (2025). Could tack-curing influence margin continuity and conversion degree of a universal dual-curing cement?. Materials, 18.10.3390/ma18122920 ↗
27. Light-emitting diode polymerization lights: Attributes and uses
28. Effect of ceramic thickness on light attenuation, degree of conversion, Knoop hardness, and elastic modulus of four luting resins10.2341/21-195-L ↗
29. A physico-chemical explanation of the post-polymerization shrinkage in dental resins10.1016/j.dental.2005.04.030 ↗
30. Post-curing conversion kinetics as functions of the irradiation time and increment thickness10.1590/1678-7757201302380 ↗
31. Effect of monomer type on the CC degree of conversion, water sorption and solubility, and color stability of model dental composites10.1016/j.dental.2017.01.010 ↗
32. The effect of filler and silane content on conversion of resin-based composite10.1016/S0109-5641(02)00062-3 ↗
33. Optimal photoinitiator concentration for light-cured dental resins10.1016/j.polymertesting.2020.107039 ↗
34. Color stability and degree of conversion of a novel dibenzoyl germanium derivative containing photo-polymerized resin luting cement
35. Structure–property relationships in dimethacrylate networks based on Bis-GMA, UDMA and TEGDMA10.1016/j.dental.2009.01.106 ↗
36. Glycerol-dimethacrylate as alternative hydrophilic monomer for HEMA replacement in simplified adhesives
37. Study on polymeric systems based on 2,2 bis-4(2 hydroxy-3-methacryloyloxypropoxy) phenyl propane10.1016/0142-9612(91)90009-Y ↗
38. (2024, December 07). Esstech.X-733-000, DDDMA. Available online: https://catalog.esstechinc.com/viewitems/monomers/multifunctional-monomers.
39. Dantagnan, C.A., Babajko, S., Nassif, A., Houari, S., Jedeon, K., Francois, P., Dursun, E., Attal, J.-P., and Bosco, J. (2024). Analysis of resin-based dental materials’ composition depending on their clinical applications. Polymers, 16.10.20944/preprints202403.1163.v1 ↗
40. Molecular characterization of one-step self-etching adhesives placed on dentin and inert substrate
41. Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part III. Effect of acidic resin monomers
42. Bond performance of “Touch and Cure” adhesives on resin core systems10.4012/dmj.2015-330 ↗
43. Degree of conversion of dual-cured composite luting agents: The effect of transition metal-based touch-cure activators10.1016/j.jdent.2024.105147 ↗
44. Degree of conversion and dentin bond strength of light-cured multi-mode adhesives pretreated or mixed with sulfinate agents10.4012/dmj.2020-346 ↗
45. Dimitriadi, M., Petropoulou, A., Masouras, K., Zafiropoulou, M., Zinelis, S., and Eliades, G. (2021). The effect of touch-cure polymerization on the conversion and hardness of core build-up resin composites: A laboratory study. Materials, 14.10.3390/ma14206025 ↗
46. Sulfinates and sulfonates as high performance co-initiators in CQ-based systems: Towards aromatic amine-free systems for dental restorative materials10.1016/j.dental.2019.11.020 ↗
47. Turner, G.P.A. (1988). Introduction to Paint Chemistry and Principles of Paint Technology, Springer. [3rd ed.].10.1007/978-1-4899-6836-4 ↗
48. Tack-cure vs. conventional polymerization methods: A systematic review on resin composite cements’ properties10.1016/j.jdent.2025.105917 ↗
49. Effect of tack cure on polymerization shrinkage of resin-based luting cements10.2341/19-159-L ↗
50. Evaluation of the ceramic laminate veneer-tooth interface after different resin cement excess removal techniques10.1007/s00784-024-05536-2 ↗
51. Property evolution during vitrification of dimethacrylate photopolymer networks10.1016/j.dental.2013.09.002 ↗