journal article·2025-07-22Open access

Biocompatible Hybrid Surface Layers on Porous Magnesium Structures Fabricated by Spark Sintering

Konstantine V. Nadaraia, Anastasia A. Golysheva, Evgeniy A. Belov, Dmitry A. Lyapin, Mariia S. Gerasimenko, Maria A. Nadaraia, Arina I. Pleshkova, Igor M. Imshinetskiy, Oleg O. Shichalin, Anton A. Belov, Eugeniy K. Papynov, Sergey S. Atarshchikov, Dmitry V. Mashtalyar

Abstract

In this study, 3D Mg scaffolds were obtained by the spark plasma sintering (SPS), and a calcium phosphate coating was then obtained on the samples by the plasma electrolytic oxidation. A hybrid coating with vancomycin, zoledronic acid, and menaquinone MK-7 was formed to improve biocompatibility. The mechanical properties of the formed specimens were studied. According to XRD, XRF, SEM, EDS, and OSP studies obtained scaffolds have developed morphology and contain hydroxyapatite as well as bioactive substances. Formation of coatings improves the wettability of samples (contact angle decreases from 123.8 ± 3.1° to 26.9 ± 4.1°) and increases the surface roughness by more than 3 times. This makes them promising for use as a new generation of implantation materials. The results are important for the development of personalized implants with improved functional characteristics.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Magnesium Alloys: Properties and Applications · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Chemistry FEB RAS, 159 Pr. 100-letiya Vladivostoka, Vladivostok 690022, Russia

Far Eastern Federal University, 10 Ajax Bay, Russky Island, Vladivostok 690922, Russia

Sakhalin State University, Communist Ave., 33, Yuzhno-Sakhalinsk 693008, Russia

Medical Center, Far Eastern Federal University, 10 Ajax Bay, Russky Island, Vladivostok 690922, Russia

Funding

Russian Science Foundation

References (42)

Show source-provided references
1. Magnesium and Its Alloys as Orthopedic Biomaterials: A Review10.1016/j.biomaterials.2005.10.003 ↗
2. Practical Strategy to Construct Anti-Osteosarcoma Bone Substitutes by Loading Cisplatin into 3D-Printed Titanium Alloy Implants Using a Thermosensitive Hydrogel
3. In Vitro and in Vivo Studies on a Mg–Sr Binary Alloy System Developed as a New Kind of Biodegradable Metal10.1016/j.actbio.2012.02.018 ↗
4. Improved Quality and Functional Properties of Ti-6Al-4V ELI Alloy for Personalized Orthopedic Implants Fabrication with EBM Process10.1016/j.jmapro.2022.02.011 ↗
5. Davoodi, F., Varmaziar, S., Atapour, M., Iuliano, L., and Saboori, A. (2025). In Vitro Corrosion and Bio-Tribocorrosion Performance of Electron Beam Powder Bed Fusion Ti6Al4V Specimens with Lapping and Superfinishing Treatments. Prog. Addit. Manuf.10.1007/s40964-025-01180-8 ↗
6. Additive Manufacturing of Precision Biomaterials10.1002/adma.201901994 ↗
7. Application of Carbonaceous Template for Porous Structure Control of Ceramic Composites Based on Synthetic Wollastonite Obtained via Spark Plasma Sintering10.1016/j.ceramint.2014.09.045 ↗
8. Synthetic CaSiO3 Sol-Gel Powder and SPS Ceramic Derivatives: “In Vivo” Toxicity Assessment10.1016/j.pnsc.2019.07.004 ↗
9. Sol-Gel (Template) Synthesis of Osteoplastic CaSiO3/HAp Powder Biocomposite: “In Vitro” and “in Vivo” Biocompatibility Assessment10.1016/j.powtec.2020.04.040 ↗
10. PEO/Polymer Hybrid Coatings on Magnesium Alloy to Improve Biodegradation and Biocompatibility Properties10.1016/j.surfin.2022.102495 ↗
11. Lin, K., and Chang, J. (2015). Structure and Properties of Hydroxyapatite for Biomedical Applications. Hydroxyapatite (Hap) for Biomedical Applications, Elsevier.10.1016/B978-1-78242-033-0.00001-8 ↗
12. Anionic Assisted Incorporation of WO3 Nanoparticles for Enhanced Electrochemical Properties of AZ31 Mg Alloy Coated via Plasma Electrolytic Oxidation10.1016/j.jallcom.2022.165445 ↗
13. AC Plasma Electrolytic Oxidation of Magnesium with Zirconia Nanoparticles10.1016/j.apsusc.2008.04.100 ↗
14. Deposition of Duplex MAO Layer/Nanostructured Titanium Dioxide Composite Coatings on Mg-1%Ca Alloy Using a Combined Technique of Air Plasma Spraying and Micro Arc Oxidation10.1016/j.jallcom.2015.07.200 ↗
15. Recent Progress in Surface Modification of Metals Coated by Plasma Electrolytic Oxidation: Principle, Structure, and Performance10.1016/j.pmatsci.2020.100735 ↗
16. Antibacterial Ca/P-Coatings Formed on Mg Alloy Using Plasma Electrolytic Oxidation and Antibiotic Impregnation10.1016/j.matlet.2022.132099 ↗
17. Magnesium Based Alloys and Composites: Revolutionized Biodegradable Temporary Implants and Strategies to Enhance Their Performance10.1016/j.mtla.2023.101680 ↗
18. Antibacterial Activation of Hydroxyapatite (HA) with Controlled Porosity by Different Antibiotics10.1016/j.bioeng.2007.08.001 ↗
19. Akbulut, A.C., Wasilewski, G.B., Rapp, N., Forin, F., Singer, H., Czogalla-Nitsche, K.J., and Schurgers, L.J. (2021). Menaquinone-7 Supplementation Improves Osteogenesis in Pluripotent Stem Cell Derived Mesenchymal Stem Cells. Front. Cell Dev. Biol., 8.10.3389/fcell.2020.618760 ↗
20. Wang, Y., Yang, W., Liu, L., Liu, L., Chen, J., Duan, L., Li, Y., and Li, S. (2023). Vitamin K2 (MK-7) Attenuates LPS-Induced Acute Lung Injury via Inhibiting Inflammation, Apoptosis, and Ferroptosis. PLoS ONE, 18.10.1371/journal.pone.0294763 ↗
21. Efficacy of a Plasma-Deposited, Vancomycin/Chitosan Antibiotic Coating for Orthopaedic Devices in a Bacterially Challenged Rabbit Model10.1016/j.mtla.2021.101122 ↗
22. Ten Years of Very Infrequent Zoledronate Therapy in Older Women: An Open-Label Extension of a Randomized Trial10.1210/clinem/dgaa062 ↗
23. Metal-Organic Zn-Zoledronic Acid and 1-Hydroxyethylidene-1,1-Diphosphonic Acid Nanostick-Mediated Zinc Phosphate Hybrid Coating on Biodegradable Zn for Osteoporotic Fracture Healing Implants10.1016/j.actbio.2023.05.020 ↗
24. Liu, X., Chen, W., Shao, B., Zhang, X., Wang, Y., Zhang, S., and Wu, W. (2021). Mussel Patterned with 4D Biodegrading Elastomer Durably Recruits Regenerative Macrophages to Promote Regeneration of Craniofacial Bone. Biomaterials, 276.10.1016/j.biomaterials.2021.120998 ↗
25. Polydopamine-Mediated Graphene Oxide and Nanohydroxyapatite-Incorporated Conductive Scaffold with an Immunomodulatory Ability Accelerates Periodontal Bone Regeneration in Diabetes
26. Plasma Electrolytic Oxidation of Magnesium and Its Alloys: Mechanism, Properties and Applications10.1016/j.jma.2017.02.004 ↗
27. Antibacterial HA-Coatings on Bioresorbable Mg Alloy10.1016/j.jma.2024.05.006 ↗
28. The Contact Angle in Capillarity10.1063/1.2185655 ↗
29. Estimation of the Surface Free Energy of Polymers10.1002/app.1969.070130815 ↗
30. The Surface Tension of Pure Liquid Compounds10.1063/1.3253106 ↗
31. Hybrid Surface Layers with Antibacterial and Anti-Inflammatory Activity for Implants Materials10.1016/j.jma.2025.04.014 ↗
32. Lerebours, A., Vigneron, P., Bouvier, S., Rassineux, A., Bigerelle, M., and Egles, C. (2019). Additive Manufacturing Process Creates Local Surface Roughness Modifications Leading to Variation in Cell Adhesion on Multifaceted TiAl6V4 Samples. Bioprinting, 16.10.1016/j.bprint.2019.e00054 ↗
33. Elastic Modulus and Hardness of Cortical and Trabecular Bone Lamellae Measured by Nanoindentation in the Human Femur10.1016/S0021-9290(99)00111-6 ↗
34. Novel Bioactive Materials with Different Mechanical Properties10.1016/S0142-9612(03)00044-9 ↗
35. Determination of Synergistic Effect between Roughness and Surface Chemistry on Cell Adhesion of a Multilayer Si-Hydroxyapatite Coating on Ti6Al4V Obtained by Magnetron Sputtering10.1016/j.tsf.2022.139489 ↗
36. Relationship between Surface Properties (Roughness, Wettability and Morphology) of Titanium and Dental Implant Removal Torque10.1016/j.jmbbm.2007.12.002 ↗
37. Theoretical Insights into the Hydrophobicity of Low Index CeO2 Surfaces10.1016/j.apsusc.2019.01.208 ↗
38. Wettability of Porous Surfaces10.1039/tf9444000546 ↗
39. Corrosion and Wettability of PEO Coatings on Magnesium by Addition of Potassium Stearate10.1016/j.jma.2017.06.002 ↗
40. Evaluation of Metallic and Polymeric Biomaterial Surface Energy and Surface Roughness Characteristics for Directed Cell Adhesion10.1089/107632700300003297 ↗
41. Cell Adhesion to Biomaterials: Correlations between Surface Charge, Surface Roughness, Adsorbed Protein, and Cell Morphology
42. The Influence of Implant Surface Properties on Cell Adhesion and Proliferation10.1007/s10856-007-2006-0 ↗