journal article·2025-03-13Open access

Formulating Mechanically Robust Composite Restorative Materials for High Performance

Austyn Salazar, Natalie Anderson, Jeffrey Stansbury

Abstract

Although dental resin composite restoratives offer a widely used direct-placement treatment option aimed at replacing the form and function of a natural tooth, there are several clinically relevant performance aspects of these materials that can be improved. The formulation of the resin matrix phase of dental composites for high-efficiency photopolymerization leading to polymers with excellent mechanical properties has always been a challenge that is addressed here through the use of structurally new and more reactive monomers as well as the formation of polymer networks that incorporate non-covalent reinforcing interactions. The purpose of this study was to validate that a set of tetraurethane diacrylates (TUDAs) with a novel configuration of their urethane linkages in coordination with acidic comonomers could be devised to obtain highly robust new composite materials. Due to the novel molecular design, this exploratory approach was conducted using reaction kinetics and three-point bend testing to assess the performance. Conversion and mechanical properties were measured to refine these formulations prior to the addition of filler. The initial formulations demonstrated outstanding dry mechanical test results that subsequently showed a major intolerance to water storage, which led to a model study using urethane diacrylate (UDA) followed by the addition of hydrophobic TUDA monomers. Once the resin formulations were optimized, silane-treated particulate filler was added to determine the effectiveness as composite materials. The final formulation used a hydrophobic, aromatic TUDA along with 4-methacryloxyethyl trimellitic anhydride (4-META) as a latent acidic comonomer and a mixture of acrylic acid (AA) and methacrylic acid (MAA). This formulation achieves a very high level of both reactivity and mechanical properties relative to current dental composite restoratives.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Photopolymerization techniques and applications · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Craniofacial Biology, School of Dental Medicine, University of Colorado Anschutz Medical Campus, Aurora, CO 80045, USA

Chemical and Biological Engineering, University of Colorado, Boulder, CO 80303, USA

Funding

NIH/NIDCR

References (34)

Show source-provided references
1. Ferracane, J.L. (2024). A Historical Perspective on Dental Composite Restorative Materials. J. Funct. Biomater., 15.10.3390/jfb15070173 ↗
2. Direct composite resin fillings versus amalgam fillings for permanent posterior teeth
3. Clinical performance of posterior resin composite restorations after up to 33 years10.1016/j.dental.2022.02.009 ↗
4. Prevalence of Secondary Caries Among Different Restorations
5. Developments in resin-based composites10.1038/s41415-022-4240-8 ↗
6. Long-term elution of monomers from resin-based dental composites10.1016/j.dental.2019.01.005 ↗
7. How much do resin-based dental materials release? A meta-analytical approach10.1016/j.dental.2011.05.001 ↗
8. Liu, J., Zhang, H., Sun, H., Liu, Y., Liu, W., Su, B., and Li, S. (2021). The Development of Filler Morphology in Dental Resin Composites: A Review. Materials, 14.10.3390/ma14195612 ↗
9. Dental composite resin: A review of major mechanical properties, measurements and its influencing factors
10. Effect of chemical structure on degree of conversion in light-cured dimethacrylate-based dental resins10.1016/S0142-9612(01)00308-8 ↗
11. Hydrogen bonding interactions in methacrylate monomers and polymers10.1002/jbm.a.31448 ↗
12. Barszczewska-Rybarek, I.M., Chroszcz, M.W., and Chladek, G. (2020). Novel Urethane-Dimethacrylate Monomers and Compositions for Use as Matrices in Dental Restorative Materials. Int. J. Mol. Sci., 21.10.3390/ijms21072644 ↗
13. New urethane dimethacrylates for testing in dental applications. Relational aspects in chemistry and photochemistry of composite materials
14. Mechanisms, polymerization rate scaling, and oxygen inhibition with an ultra-rapid monovinyl urethane acrylate10.1016/j.polymer.2008.08.051 ↗
15. Szczesio-Wlodarczyk, A., Domarecka, M., Kopacz, K., Sokolowski, J., and Bociong, K. (2021). An evaluation of the properties of urethane dimethacrylate-based dental resins. Materials, 14.10.3390/ma14112727 ↗
16. Characteristic polymerization shrinkage behavior of UDMA/acidic monomer resins
17. Polymer properties on resins composed of UDMA and methacrylates with the carboxyl group10.4012/dmj.20.206 ↗
18. Leaching and Cytotoxicity of Formaldehyde and Methyl-Methacrylate from Acrylic Resin Denture Base Materials10.1016/0022-3913(94)90448-0 ↗
19. Cytotoxic effects of acrylates and methacrylates: Relationships of monomer structures and cytotoxicity10.1002/(SICI)1097-4636(19971215)37:4<517::AID-JBM10>3.0.CO;2-5 ↗
20. Urethane Dimethacrylates with Carboxylic Groups as Potential Dental Monomers. Synthesis and Properties10.1295/polymj.PJ2009131 ↗
21. Barszczewska-Rybarek, I.M. (2019). A Guide through the Dental Dimethacrylate Polymer Network Structural Characterization and Interpretation of Physico-Mechanical Properties. Materials, 12.10.3390/ma12244057 ↗
22. Progress in dimethacrylate-based dental composite technology and curing efficiency10.1016/j.dental.2012.11.005 ↗
23. Refractive indices of unfilled resin mixtures and cured composites related to color and translucency of conventional and low-shrinkage composites10.1002/jbm.b.33523 ↗
24. Staining- and aging-dependent changes in color, translucency, and gloss of cloud-shade and one-shade resin composites
25. Color stability and polymerization behavior of direct esthetic restorations10.1111/jerd.12113 ↗
26. Effect of adhesive-monomers and photoinitiator on C = C conversion and color stability of model self-adhesive flowable composites10.1016/j.ijadhadh.2018.09.012 ↗
27. Chemistry of silanes: Interfaces in dental polymers and composites10.6028/jres.110.081 ↗
28. Effect of the structure of silane-coupling agent on dynamic mechanical properties of dental resin-nanocomposites10.1002/app.28726 ↗
29. Superabsorbent polymers: A state-of-art review on their classification, synthesis, physicochemical properties, and applications10.1515/revce-2020-0102 ↗
30. Modeling the effects of pH and ionic strength on swelling of anionic polyelectrolyte gels10.1088/0965-0393/23/5/055005 ↗
31. Dimethacrylate derivatives of dimer acid10.1002/pola.21493 ↗
32. Effect of base monomer’s refractive index on curing depth and polymerization conversion of photo-cured resin composites10.4012/dmj.24.403 ↗
33. The effect of refractive index of fillers and polymer matrix on translucency and color matching of dental resin composite
34. Dental resin composites: A review on materials to product realizations10.1016/j.compositesb.2021.109495 ↗