Evaluation of the Effect of Different Universal Adhesives on Remineralized Enamel by Shear Bond Strength and Fe-SEM/EDX Analysis
Source abstract
Abstract
The aim of this study is to evaluate the shear bond strength of different universal adhesives applied to intact, demineralized, and remineralized enamel surfaces with total-etch and self-etch modes and to examine the effect of universal adhesives on the Ca/P mineral atomic and mass ratios of these enamel with FE-SEM/EDX (Field Emission Scanning Electron Microscopy with Energy Dispersive X-Ray Spectroscopy) analysis. For this study, 264 bovine incisors were used. Samples in the demineralized and remineralized groups were kept in demineralization solution at 37 °C for 96 h to make an artificial initial carious lesion. After demineralization, half of the demineralized samples were remineralized with MI Paste Plus. For shear bond strength (n = 144) and FE-SEM/EDX analysis (n = 120), G-Premio Bond and Clearfil S3 Bond Universal were applied on enamel surfaces with total-etch and self-etch modes, and bond strength samples were restored with resin composite. All samples were tested. The results were evaluated statistically by a three-way ANOVA test. The shear bond strength of the remineralized enamel showed high bond strength values comparable to intact enamel for universal adhesive systems. The Ca/P mineral atomic and mass ratios in remineralized enamel showed higher values than demineralized enamel, similar to intact enamel for universal adhesive systems. Initial carious lesion surfaces are unsuitable enamel surfaces for restoration. The remineralization of this surface layer before adhesive procedures may positively affect bond strength.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Dental Erosion and Treatment · Dental Health and Care Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Restorative Dentistry Department, Faculty of Dentistry, Gazi University, 06510 Ankara, Turkey
References (53)
Show source-provided references
1. Dental caries: A dynamic disease process10.1111/j.1834-7819.2008.00064.x ↗
2. Prevention and reversal of dental caries: Role of low level fluoride10.1111/j.1600-0528.1999.tb01989.x ↗
3. Effectiveness of polyacrylic acid-bioactive glass air abrasion preconditioning with NovaMin remineralization on the microhardness of incipient enamel-like lesion10.4103/JCD.JCD_195_19 ↗
4. A Scanning Electron Microscopic Study of Enamel Surfaces of Incipient Caries10.3109/01913123.2015.1060284 ↗
5. Microshear Bond Strength of Adhesives to Enamel Remineralized Using Casein Phosphopeptide Agents10.2341/13-220-L ↗
6. The Effect of Remineralizing Agents With/Without CO2 Laser Irradiation on Structural and Mechanical Properties of Enamel and its Shear Bond Strength to Orthodontic Brackets10.34172/jlms.2020.25 ↗
7. Effect of Remineralizing Agents on Bond Strength of Resin-Composites to Primary Enamel10.17796/1053-4625-43.5.5 ↗
8. Adhesive systems effect over bond strength of resin-infiltrated and de/remineralized enamel10.12688/f1000research.20523.1 ↗
9. Comparative analysis of the remineralization potential of CPP-ACP with Fluoride, Tri-Calcium Phosphate and Nano Hydroxyapatite using SEM/EDX—An in vitro study
10. Efficacy of CPP-ACP and CPP-ACPF on enamel remineralization—An in vitro study using scanning electron microscope and DIAGNOdent10.4103/0970-9290.80001 ↗
11. Acid resistance of enamel subsurface lesions remineralized by a sugar-free chewing gum containing casein phosphopeptide-amorphous calcium phosphate10.1159/000080585 ↗
12. Resin bonding using an all-etch or self-etch adhesive to enamel after carbamide peroxide and/or CPP-ACP treatment10.1111/j.1834-7819.2007.tb00478.x ↗
13. Evaluation of bond strength of composite resin to enamel demineralized, exposed to remineralization and subjected to caries infiltration10.14295/bds.2016.v19i1.1212 ↗
14. State of the art of self-etch adhesives10.1016/j.dental.2010.10.023 ↗
15. Choi, A.N., Lee, J.H., Son, S.A., Jung, K.H., Kwon, Y.H., and Park, J.K. (2017). Effect of Dentin Wetness on the Bond Strength of Universal Adhesives. Materials, 10.10.3390/ma10111224 ↗
16. In vitro longevity of bonding properties of universal adhesives to dentin10.2341/14-055-L ↗
17. Eight-year clinical evaluation of a 2-step self-etch adhesive with and without selective enamel etching10.1016/j.dental.2010.08.190 ↗
18. Selective enamel etching reconsidered: Better than etch-and-rinse and self-etch?
19. The role of etching in bonding to enamel: A comparison of self-etching and etch-and-rinse adhesive systems10.1016/j.dental.2009.07.002 ↗
20. The preventive/therapeutic effect of CO(2) laser and MI Paste Plus® on intact and demineralized enamel against Streptococcus mutans (In Vitro Study)10.1016/j.heliyon.2023.e20310 ↗
21. Influence of fluoride varnish on shear bond strength of a universal adhesive on intact and demineralized enamel10.1007/s10266-018-0363-4 ↗
22. International Standard (2024, December 18). Adhesives—Designation of Main Failure Patterns. Available online: https://cdn.standards.iteh.ai/samples/80800/cc2769b3d44a498dbe129fa08906f944/ISO-10365-2022.pdf.
23. Performance of a new laser fluorescence device for the detection of occlusal caries in vitro10.1016/j.jdent.2005.11.002 ↗
24. In vitro bonding performance of self-etch adhesives: II--ultramorphological evaluation10.2341/07-133 ↗
25. Multidisciplinary evaluation of the remineralization potential of three fluoride-based toothpastes on natural white spot lesions10.1007/s00784-023-05334-2 ↗
26. Influence of the mode of application of universal adhesive systems on adhesive properties to fluorotic enamel10.1590/1807-3107bor-2019.vol33.0120 ↗
27. Enamel microstructural features of bovine and human incisors: A comparative study10.1016/j.aanat.2021.151700 ↗
28. Shear bond strength of brackets to demineralize enamel after different pretreatment methods10.2319/012311-48.1 ↗
29. Comparative study of the dental substrate used in shear bond strength tests10.1590/S1517-74912003000200014 ↗
30. Comparison of microtensile bond strength to enamel and dentin of human, bovine, and porcine teeth
31. Influence of selected variables on adhesion testing10.1016/0109-5641(92)90097-V ↗
32. The enamel microstructures of bovine mandibular incisors10.1002/ar.22543 ↗
33. Calcium distribution in human and bovine surface enamel10.1159/000259858 ↗
34. The characterization of enamel surface demineralization, remineralization, and associated hardness changes in human and bovine material10.1016/0003-9969(69)90258-1 ↗
35. Combined effect of casein phosphopeptide-amorphous calcium phosphate and sodium trimetaphosphate on the prevention of enamel demineralization and dental caries: An in vitro study10.1007/s00784-020-03597-7 ↗
36. Effects of Remineralizing Agents Based on Calcium Phosphate, Sodium Phosphate, or Sodium Fluoride on Eroded Cervical Dentin10.2341/20-209-L ↗
37. Effect of ozone to remineralize initial enamel caries: In situ study10.1007/s00784-016-1710-x ↗
38. A comparative evaluation of remineralizing potential of three commercially available remineralizing agents: An in vitro study10.5005/jp-journals-10005-1715 ↗
39. Do fluoride and casein phosphopeptide-amorphous calcium phosphate affect shear bond strength of orthodontic brackets bonded to a demineralized enamel surface?10.2319/090510-520.1 ↗
40. Rashid, M.F., Karobari, M.I., Halim, M.S., and Noorani, T.Y. (2022). Effectiveness of Visual-Tactile Examination and DIAGNOdent Pen in Detecting Early Enamel Caries and Its Remineralisation: An In Vitro Study. Biomed. Res. Int., 2022.10.1155/2022/1263750 ↗
41. Efficacy of different remineralization agents on treating incipient enamel lesions of primary and permanent teeth10.4103/JCD.JCD_509_18 ↗
42. Performance and reproducibility of a laser fluorescence system for detection of occlusal caries in vitro10.1159/000016527 ↗
43. Clinical performance of a laser fluorescence device for detection of occlusal caries lesions10.1034/j.1600-0722.2001.109001014.x ↗
44. The effect of a vital bleaching technique on enamel surface morphology and the bonding of composite resin to enamel10.1111/j.1365-2842.1996.tb00848.x ↗
45. Technique-sensitivity of contemporary adhesives10.4012/dmj.24.1 ↗
46. Origin of interfacial droplets with one-step adhesives10.1177/154405910708600810 ↗
47. Resistance to degradation of resin-dentin bonds using a one-step HEMA-free adhesive10.1016/j.jdent.2006.07.005 ↗
48. Bonding durability of HEMA-free and HEMA-containing one-step adhesives to dentine surrounded by bonded enamel10.1016/j.jdent.2007.11.001 ↗
49. Long-term evaluation of water sorption and ultimate tensile strength of HEMA-containing/-free one-step self-etch adhesives10.1016/j.jdent.2011.04.008 ↗
50. Surface moisture influence on etch-and-rinse universal adhesive bonding
51. Do enamel microabrasion and casein phosphopeptide-amorphous calcium phosphate affect shear bond strength of orthodontic brackets bonded to a demineralized enamel surface?10.2319/041211-265.1 ↗
52. Bond strength and morphology of enamel using self-etching adhesive systems with different acidities10.1590/S1678-77572009000400009 ↗
53. A comparative evaluation of the remineralization potential of three commercially available remineralizing agents on white spot lesions in primary teeth: An in vitro study10.4103/JISPPD.JISPPD_242_16 ↗