journal article·2024-12-08Open access

Evaluation of the Effect of Chitosan-Based Irrigation Solutions on the Bond Strength of Mineral Trioxide Aggregate to Bulk-Fill Composite

Arzu Şahin Mantı, Bağdagül Helvacıoğlu Kıvanç

Journal of Functional Biomaterials· Volume 15· Issue 12

Abstract

(1) Background: Bond strength between repair and restorative materials is crucial for endodontic success. This study assessed the effects of the following final irrigation solutions on the bond strength of mineral trioxide aggregate (MTA) to a bulk-fill composite: (1) 17% Ethylenediamine tetraacetic acid (EDTA); (2) 2% Chlorhexidine (CHX); (3) 0.2% chitosan; (4) 0.2% chitosan with 2% CHX; 5) 0.2% chitosan with AgNPs. (2) Methods: Sixty MTA samples were divided into six groups (n = 10) based on the final irrigation solution: 1. EDTA, 2. CHX, 3. Chitosan, 4. Chitosan-CHX, 5. Chitosan-AgNP, and 6. distilled water (control). After a 5-min solution exposure, each sample was restored with the bulk-fill composite, and the shear bond strength (SBS) was measured. Structural changes in MTA were analyzed using SEM and EDS, and failure modes were classified as adhesive, cohesive, or mixed. Data were analyzed by one-way ANOVA with Tamhane’s T2 and Tukey’s tests (α = 0.05). (3) Results: EDTA exhibited the lowest SBS (p < 0.001), while Chitosan-CHX showed the highest. SEM showed a spongy, void-rich surface in EDTA-treated MTA, with significant Ca depletion per EDS. Chitosan-CHX showed no structural change. Cohesive fractures within MTA were predominant. (4) Conclusions: EDTA significantly reduces SBS, while chitosan with CHX enhances bond strength.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Endodontics and Root Canal Treatments · Concrete and Cement Materials Research · Polymer Synthesis and Characterization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Endodontics, Faculty of Dentistry, Gazi University, 06490 Ankara, Türkiye

References (73)

Show source-provided references
1. Calcium silicate-based cements and functional impacts of various constituents10.4012/dmj.2015-425 ↗
2. Modern methods and materials used to treat root perforation: Effectiveness comparison10.1007/s10856-023-06770-y ↗
3. Present status and future directions—Managing perforations10.1111/iej.13748 ↗
4. Bolhari, B., Noori, F., Assadian, H., Raee, A., Ghabraei, S., Shamshiri, A.R., and Heboyan, A. (2024). The effect of three additives on properties of mineral trioxide aggregate cements: A systematic review and meta-analysis of in vitro studies. BMC Oral Health, 24.10.1186/s12903-024-04103-1 ↗
5. Treatment outcome of mineral trioxide aggregate: Repair of root perforations-long-term results10.1016/j.joen.2014.02.003 ↗
6. Mineral trioxide aggregate and other bioactive endodontic cements: An updated overview—part I: Vital pulp therapy10.1111/iej.12841 ↗
7. Effects of smear layer removal agents on the physical properties and microstructure of mineral trioxide aggregate cement10.1016/j.jdent.2017.08.018 ↗
8. Irrigation trends among American Association of Endodontists members: A web-based survey10.1016/j.joen.2011.08.013 ↗
9. Baruwa, A.O., Martins, J.N.R., Maravic, T., Mazzitelli, C., Mazzoni, A., and Ginjeira, A. (2022). Effect of Endodontic Irrigating Solutions on Radicular Dentine Structure and Matrix Metalloproteinases-A Comprehensive Review. Dent. J., 10.10.3390/dj10120219 ↗
10. The effect of chlorhexidine as an endodontic disinfectant10.1016/S1079-2104(03)00168-9 ↗
11. Assessment of antimicrobial efficacy of nano chitosan, chlorhexidine, chlorhexidine/nano chitosan combination versus sodium hypochlorite irrigation in patients with necrotic mandibular premolars: A randomized clinical trial10.3889/oamjms.2021.7070 ↗
12. Wassel, M., Radwan, M., and Elghazawy, R. (2023). Direct and residual antimicrobial effect of 2% chlorhexidine gel, double antibiotic paste and chitosan- chlorhexidine nanoparticles as intracanal medicaments against Enterococcus faecalis and Candida albicans in primary molars: An in-vitro study. BMC Oral Health, 23.10.1186/s12903-023-02862-x ↗
13. Application of Nanomaterials in Endodontics10.34133/bmef.0043 ↗
14. González-Luna, P.-I., Martínez-Castañón, G.-A., Zavala-Alonso, N.-V., Patiño-Marin, N., Niño-Martínez, N., Morán-Martínez, J., and Ramírez-González, J.-H. (2016). Bactericide effect of silver nanoparticles as a final irrigation agent in endodontics on Enterococcus faecalis: An ex vivo study. J. Nanomater., 7597295.10.1155/2016/7597295 ↗
15. Evaluation of Related Factors in the Failure of Endodontically Treated Teeth: A Cross-sectional Study10.1016/j.joen.2017.08.029 ↗
16. Impact of the quality of coronal restoration versus the quality of root canal fillings on success of root canal treatment: A systematic review and meta-analysis10.1016/j.joen.2011.04.002 ↗
17. Jang, Y.E., Kim, Y., Kim, S.Y., and Kim, B.S. (2024). Predicting early endodontic treatment failure following primary root canal treatment. BMC Oral Health, 24.10.1186/s12903-024-03974-8 ↗
18. Abdelaziz, M.M., Fathy, S., Alaraby, A.A., Shehab, W.I., and Temirek, M.M. (2024). Clinical, radiographic and biochemical assessment of proximal cavities restored with composite resin using incremental vs. bulk packing techniques: One-year randomized clinical trial. BMC Oral Health, 24.10.1186/s12903-024-04746-0 ↗
19. Clinical efficacy of resin-based direct posterior restorations and glass-ionomer restorations - An updated meta-analysis of clinical outcome parameters10.1016/j.dental.2021.10.018 ↗
20. Short curing time bulk fill composite systems: Volumetric shrinkage, degree of conversion and Vickers hardness10.1590/1807-3107bor-2024.vol38.0030 ↗
21. Volumetric polymerization shrinkage and its comparison to internal adaptation in bulk fill and conventional composites: A μCT and OCT in vitro analysis10.1016/j.dental.2019.07.025 ↗
22. Effect of polymerization mode on shrinkage kinetics and degree of conversion of dual-curing bulk-fill resin composites10.1007/s00784-023-04928-0 ↗
23. Bottom/top hardness ratio and dentin bonding stability of conventional and bulk-fill resin composites10.20396/bjos.v22i00.8667617 ↗
24. Comparative evaluations of shear bond strength of mineral trioxide aggregate, Biodentine, and calcium-enriched mixture to bulk-fill flowable composite using three different adhesive systems: An in vitro study10.4103/JCDE.JCDE_192_24 ↗
25. Effect of restorative timing on shear bond strength of composite resin/calcium silicate-based cements adhesive interfaces10.1007/s00784-020-03640-7 ↗
26. Ulusoy, Ö.İ., Ballal, N.V., Narkedamalli, R., Ulusoy, N., Shetty, K.P., and Luke, A.M. (2024). Dislodgement resistance and structural changes of tricalcium silicate-based cements after exposure to different chelating agents. PLoS ONE, 19.10.1371/journal.pone.0296647 ↗
27. In vitro evaluation of effect of various endodontic solutions on selected physical properties of white mineral trioxide aggregate10.1111/j.1747-4477.2009.00211.x ↗
28. Micro-shear bond strength of different calcium silicate materials to bulk-fill composite10.7717/peerj.15183 ↗
29. Chitosan-coated silver nanoparticles promoted antibacterial, antibiofilm, wound-healing of murine macrophages and antiproliferation of human breast cancer MCF 7 cells10.1016/j.polymertesting.2020.106675 ↗
30. Microleakage in endodontics
31. Improving endodontic success through coronal leakage prevention
32. Influence of the coronal restoration on the outcome of endodontically treated teeth10.1080/00016357.2019.1640390 ↗
33. Comparative evaluation of the bond strength of self-adhering and bulk-fill flowable composites to MTA Plus, Dycal, Biodentine, and TheraCal: An in vitro study10.5395/rde.2020.45.e10 ↗
34. Palma, P.J., Marques, J.A., Falacho, R.I., Vinagre, A., Santos, J.M., and Ramos, J.C. (2018). Does Delayed Restoration Improve Shear Bond Strength of Different Restorative Protocols to Calcium Silicate-Based Cements?. Materials, 11.10.3390/ma11112216 ↗
35. Karaman, G.E., Bulut, M., and Yazan Sukur, E. (2024). Comparative analysis of shear bond strength of MTA and Theracal PT with different restorative materials. BMC Oral Health, 24.10.1186/s12903-024-04763-z ↗
36. The effects of sodium hypochlorite and ethylenediaminetetraacetic acid on the microhardness of Mineral Trioxide Aggregate and TotalFill Bioceramic Putty10.1111/aej.12352 ↗
37. Effect of acidic solutions on the microhardness of dentin and set OrthoMTA and their cytotoxicity on murine macrophage10.5395/rde.2016.41.1.12 ↗
38. Surface microhardness and roughness properties of Biodentine following treatment with various endodontic irrigants
39. Metrologic evaluation of the surface of white MTA after the use of two endodontic irrigants10.1016/j.joen.2006.12.002 ↗
40. How Irrigants Affect Mineral Trioxide Aggregate (MTA) Sealing in Furcal Perforations: An In Vitro Study
41. Arbildo-Vega, H.I., Lapinska, B., Panda, S., Lamas-Lara, C., Khan, A.S., and Lukomska-Szymanska, M. (2020). Clinical Effectiveness of Bulk-Fill and Conventional Resin Composite Restorations: Systematic Review and Meta-Analysis. Polymers, 12.10.3390/polym12081786 ↗
42. Candan, M., Altinay Karaca, F.K., and Öznurhan, F. (2023). Evaluation of the Shear Bond Strength of Immediate and Delayed Restorations of Various Calcium Silicate-Based Materials with Fiber-Reinforced Composite Resin Materials. Polymers, 15.10.3390/polym15193971 ↗
43. Micro-shear bond strength of adhesives with different degrees of acidity: Effect on sound and artificially hypermineralized dentin10.1002/jemt.23426 ↗
44. Celiksoz, O., and Irmak, O. (2024). Delayed vs. immediate placement of restorative materials over Biodentine and RetroMTA: A micro-shear bond strength study. BMC Oral Health, 24.10.1186/s12903-024-03917-3 ↗
45. The effect of 5% NaOCl and 17% EDTA, at 24hrs and 8days, on the microhardness of MTA, Biodentine and Pozzolan cement: An in-vitro study10.21276/ujds.2020.6.3.5 ↗
46. Microstructure and chemical analysis of four calcium silicate-based cements in different environmental conditions10.1007/s00784-018-2394-1 ↗
47. Smear-layer removal agents affect the push-out bond strength of calcium silicate-based endodontic sealers?10.1111/iej.12662 ↗
48. Effect of exposure to root canal irrigants on the push-out bond strength of calcium silicate-based cements10.1007/s00784-020-03658-x ↗
49. Effects of EDTA on the hydration mechanism of mineral trioxide aggregate10.1177/154405910708600609 ↗
50. Effect of root canal irrigation protocols on the dislocation resistance of mineral trioxide aggregate-based materials: A systematic review of laboratory studies10.1111/iej.12898 ↗
51. Bond strength of adhesive systems to mineral trioxide aggregate with different time intervals10.1016/j.joen.2012.06.004 ↗
52. Effects of different surface treatment methods on the micro-shear bond strength of calcium silicate–based materials10.1007/s41779-023-00945-0 ↗
53. Effect of Er Cr YSGG laser etching procedure on the bond strength of different calcium silicate cements10.1007/s41547-024-00267-9 ↗
54. Shear bond strength of calcium silicate-based cements to composite resin using a universal adhesive in different application modes: An in vitro study10.1111/adj.12990 ↗
55. Acid and microhardness of mineral trioxide aggregate and mineral trioxide aggregate-like materials10.1016/j.joen.2013.10.014 ↗
56. Effect of contact times of chitosan nanoparticle as a final irrigation solution on microhardness and surface roughness of root canal dentin10.5005/jp-journals-10015-1752 ↗
57. Effects of chitosan-containing silver nanoparticles or chlorhexidine as the final irrigant on the bond strength of resin-based root canal sealers10.34172/joddd.2022.020 ↗
58. Chelating and antibacterial properties of chitosan nanoparticles on dentin10.5395/rde.2015.40.3.195 ↗
59. Lactic acid as potential substitute of acetic acid for dissolution of chitosan: Preharvest application to Butterhead lettuce10.1007/s13197-016-2484-5 ↗
60. Aqueous solutions of glycolic, propionic, or lactic acid in substitution of acetic acid to prepare chitosan dispersions: A study based on rheological and physicochemical properties10.1007/s13197-020-04691-0 ↗
61. Acidic and alkaline chemicals’ influence on a tricalcium silicate-based dental biomaterial10.1002/jbm.b.34129 ↗
62. Effect of acid-etching procedure on selected physical properties of mineral trioxide aggregate10.1111/j.1365-2591.2009.01610.x ↗
63. Novel matrix formulation for resin composite: Chemical and biomechanical characterization–Part 110.1016/j.dental.2024.07.032 ↗
64. Physicochemical and functional properties of chitosan-based nano-composite films incorporated with biogenic silver nanoparticles10.1016/j.carbpol.2019.02.005 ↗
65. In Vitro Evaluation of Different Solvents for Retrieval of Mineral Trioxide Aggregate and Calcium-Enriched Mixture
66. Chemical and physical surface and bulk material characterization of white ProRoot MTA and two Portland cements10.1016/j.dental.2005.01.019 ↗
67. Mineral trioxide aggregate and other bioactive endodontic cements: An updated overview—part II: Other clinical applications and complications10.1111/iej.12843 ↗
68. Alqahtani, A.S., Sulimany, A.M., Alayad, A.S., Alqahtani, A.S., and Bawazir, O.A. (2022). Evaluation of the Shear Bond Strength of Four Bioceramic Materials with Different Restorative Materials and Timings. Materials, 15.10.3390/ma15134668 ↗
69. Shear Bond Comparison between 4 Bioceramic Materials and Dual-cure Composite Resin10.1016/j.joen.2019.07.008 ↗
70. The physical characteristics of resin composite-calcium silicate interface as part of a layered/laminate adhesive restoration10.1016/j.dental.2013.12.010 ↗
71. Ergül, R., Aksu, S., Çalışkan, S., and Tüloğlu, N. (2024). Shear bond strength of calcium silicate-based cements to glass ionomers. BMC Oral Health, 24.10.1186/s12903-024-03890-x ↗
72. Timing for composite resin placement on mineral trioxide aggregate10.1016/j.joen.2013.06.009 ↗
73. The tooth on-a-chip: A microphysiologic model system mimicking the biologic interface of the tooth with biomaterials10.1039/C9LC00915A ↗