Analysis of Strain Distribution in Common Clinical Designs of Posterior Implant-Supported Fixed Partial Restorations: Comparison between Six Configurations
Source abstract
Abstract
The configuration of implant-supported prostheses is considered to influence the magnitude of stress concentrations, affecting their survival rate. The purpose of this study is to determine, through strain gauge measurements during load application, the dispersion and magnitude of strain concentrations in different implant-supported prosthesis designs. All designs matched those commonly used in posterior partially edentulous states. Three implants were inserted into an epoxy resin model (PLM-4B Vishay Measurements Group Inc., Raleigh, NC, USA), allowing for the delivery of three- and four-unit crowns in different cemented configurations. Loads were applied at vertical and oblique directions over the cast crowns in six different configurations representing various posterior partially edentulous restorations. The readings from the strain gauges adhered to the implant necks’ presented data on implant strain. Prostheses including cantilevers showed the highest strain among the three-unit prostheses within the prosthetic complex, and three single units showed the least (8133 µs vs. 201 µs, respectively). Angulated load application also had a role in amplifying the strains recorded, resulting in total strains of between 3.5 and 20 times higher than during vertical loading in all configurations. It can be concluded that the configuration of implant-fixed partial prosthesis changes the loads engaging the restoration, the implant, and, probably, the supporting bone.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental Implant Techniques and Outcomes · Orthopaedic implants and arthroplasty · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Prosthetic Dentistry, Goldschleger School of Dental Medicine, Tel-Aviv University, Tel-Aviv 69978, Israel
Department of Peridontology, Goldschleger School of Dental Medicine, Tel-Aviv University, Tel-Aviv 69978, Israel
Department of Prosthodontics, Hadassah Medical Center, Hebrew University of Jerusalem, Jerusalem 91120, Israel
References (37)
Show source-provided references
1. A systematic review of survival of single implants as presented in longitudinal studies with a follow up of at least 10 years
2. Prosthesis Survival Rates and Prosthetic Complications of Implant-Supported Fixed Dental Prostheses in Partially Edentulous Patients10.1111/jopr.13185 ↗
3. Systematic review evaluating the influence of the prosthetic material and prosthetic design on the clinical outcomes of implant-supported multi-unit fixed dental prosthesis in the posterior area10.1111/clr.14103 ↗
4. Froum, S.J. (2016). Dental Implant Complications: Etiology, Prevention and Treatment, John Wiley & Sons. [2nd ed.].10.1002/9781119140474 ↗
5. Di Fiore, A., Montagner, M., Sivolella, S., Stellini, E., Yilmaz, B., and Brunello, G. (2022). Peri-Implant Bone Loss and Overload: A Systematic Review Focusing on Occlusal Analysis through Digital and Analogic Methods. J. Clin. Med., 11.10.3390/jcm11164812 ↗
6. Occlusal overload and bone/implant loss10.1111/j.1600-0501.2012.02550.x ↗
7. Biomechanical considerations in osseointegrated prostheses10.1016/0022-3913(83)90361-X ↗
8. Bending Overload and Implant fracture: A retrospective Clinical Analysis
9. Peri-implant Bone Loss: Management of a Patient
10. Influence of restoration Type on stress Distribution in Bone Around Implants: A three dimensional Finite Element Analysis
11. In vitro stress analyses of dental implants supporting screw-retained and cement-retained prostheses10.1097/00008505-199908020-00006 ↗
12. Hobo, S., Ichida, E., and Garcia, C.T. (1989). Osseointegration and Occlusal Rehabilitation, Quintessence.
13. Evaluation of cement-retained versus screw-retained implant-supported restorations for marginal bone loss A systematic review and meta-analysis10.1016/j.prosdent.2015.08.026 ↗
14. Long-term outcome of cemented versus screw-retained implant-supported partial restorations
15. Prospective evaluation of implants- supported, tooth-implant supported, and teeth-supported 3-unit posterior monolithic zirconia fixed restorations: Bite force and patient satisfaction10.1002/cre2.780 ↗
16. Validation of the ‘Quality of Life with Implant Prostheses (QoLIP-10)’ questionnaire for wearers of cement-retained implant-supported restorations10.1016/j.jdent.2015.03.014 ↗
17. Cehreli, M. (2012). Handbook for Researces. Dental Science, Materials and Technology, Nova Science Publishers.
18. A Comparison of Three-Dimensional Finite Element Stress Analysis with in Vitro Strain Gauge Measurements on Dental Implants
19. The influence of the location of load transfer on strains around implants supporting four unit cement-retained fixed prostheses: In vitro evaluation of axial versus off-set loading10.1046/j.1365-2842.2002.00867.x ↗
20. Chewing movements in relation to border movements at the first molar10.1016/0022-3913(81)90220-1 ↗
21. (2024, January 15). Vishay Precision Group Manual Bulletin #S–116H. Available online: https://micro-measurements.com/knowledge-base/instruction-bulletins.
22. Chewing and swallowing patterns for different food textures in healthy subjects
23. Measurement of masticatory forces and implant loads: A Methodologic Clinical Study
24. In vivo measurement of some functional aspects with mandibular fixed prostheses supported by implants
25. Levartovsky, S., Peleg, G., Matalon, S., Tsesis, I., and Rosen, E. (2022). Maximal Bite Force Measured via Digital Bite Force Transducer in Subjects with or without Dental Implants—A Pilot Study. Appl. Sci., 12.10.3390/app12031544 ↗
26. Load factor control for implants in the posterior partially edentulous segment
27. Reduction of implant loading using a modified Centric Occlusal anatomy
28. Finite Element Stress Analysis of the Influence of Staggered Versus Straight Placement of Dental Implants
29. Misch, C.E. (1990). Misch Implant Institute Manual, Misch International Implant Institute.
30. Biomaterials and biomechanics of oral and maxillofacial implants: Current status
31. Osseointegration and its experimental background10.1016/S0022-3913(83)80101-2 ↗
32. The biomechanical effect of platform switching on external- and internal-connection implants10.11607/jomi.2305 ↗
33. Strain analysis of different diameter Morse taper implants under overloading compressive conditions10.1590/1807-3107BOR-2015.vol29.0028 ↗
34. Analysis of load transfer and stress distribution by splinted and unsplinted implant-supported fixed cemented restorations10.1111/j.1365-2842.2010.02096.x ↗
35. Technical complications of implant-supported fixedpartial dentures in partially edentulous cases after anaverage observation period of 5 years10.1111/j.1600-0501.2007.01414.x ↗
36. Survival and complication rates of implant-supported fixed partial dentures with cantilevers: A systematic review10.1111/j.1600-0501.2009.01773.x ↗
37. Single tooth bite forces in healthy young adults10.1046/j.0305-182X.2003.01179.x ↗