journal article·2023-08-10Open access

Enhancing Polymethyl Methacrylate Prostheses for Cranioplasty with Ti mesh Inlays

Gargi Shankar Nayak, Heinz Palkowski, Adele Carradò

Abstract

Biocompatible polymers such as polymethyl methacrylate (PMMA), despite fulfilling biomedical aspects, lack the mechanical strength needed for hard-tissue implant applications. This gap can be closed by using composites with metallic reinforcements, as their adaptable mechanical properties can overcome this problem. Keeping this in mind, novel Ti-mesh-reinforced PMMA composites were developed. The influence of the orientation and volume fraction of the mesh on the mechanical properties of the composites was investigated. The composites were prepared by adding Ti meshes between PMMA layers, cured by hot-pressing above the glass transition temperature of PMMA, where the interdiffusion of PMMA through the spaces in the Ti mesh provided sufficient mechanical clamping and adhesion between the layers. The increase in the volume fraction of Ti led to a tremendous improvement in the mechanical properties of the composites. A significant anisotropic behaviour was analysed depending on the direction of the mesh. Furthermore, the shaping possibilities of these composites were investigated via four-point bending tests. High shaping possibility was found for these composites when they were shaped at elevated temperature. These promising results show the potential of these materials to be used for patient-specific implant applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Metallurgy (IMET), Clausthal University of Technology, Robert-Koch-Strasse 42, 38678 Clausthal-Zellerfeld, Germany

Department of Applied Mechanics, Saarland University, Campus A4 2, 66123 Saarbruecken, Germany

CNRS UMR 7504, Institut de Physique et Chimie des Matériaux de Strasbourg (IPCMS), Université de Strasbourg, 23 rue du Lœss BP 43, 67034 Strasbourg, France

Funding

German Research Foundation: DFG · French Research Foundation: ANR

References (58)

Show source-provided references
1. Magnesium-based biomaterials as emerging agents for bone repair and regeneration: From mechanism to application10.1016/j.jma.2021.03.004 ↗
2. Custom-made composite scaffolds for segmental defect repair in long bones10.1007/s00264-010-1146-x ↗
3. Porous titanium-coated polyetheretherketone implants exhibit an improved bone–implant interface: An in vitro and in vivo biochemical, biomechanical, and histological study10.2147/MDER.S180482 ↗
4. Scaffold Design for Bone Regeneration10.1166/jnn.2014.9127 ↗
5. Effect of mechanical stability on fracture healing—An update10.1016/j.injury.2007.02.005 ↗
6. The influence of biomechanical stability on bone healing and fracture-related infection: The legacy of Stephan Perren10.1016/j.injury.2020.06.044 ↗
7. Numerical study of stress shielding reduction at fractured bone using metallic and composite bone-plate models10.1016/j.asej.2018.12.005 ↗
8. Stress shielding at the bone-implant interface: Influence of surface roughness and of the bone-implant contact ratio10.1002/jor.24840 ↗
9. Aseptic loosening of femoral components—Materials engineering and design considerations10.1016/j.matdes.2012.07.066 ↗
10. Thomas, S., Balakrishnan, P., and Sreekala, M. (2018). Fundamental Biomaterials: Ceramics, Woodhead Publishing.10.1016/B978-0-08-102203-0.00005-6 ↗
11. Progress and challenges in biomaterials used for bone tissue engineering: Bioactive glasses and elastomeric composites10.1186/2194-0517-1-2 ↗
12. Current development of biodegradable polymeric materials for biomedical applications10.2147/DDDT.S165440 ↗
13. The effect of nanobioceramic reinforcement on mechanical and biological properties of Co-base alloy/hydroxyapatite nanocomposite10.1016/j.msec.2014.12.017 ↗
14. Innovative and novel manufacturing methods of ceramics and metal-ceramic composites for biomedical applications10.1016/j.jeurceramsoc.2015.12.020 ↗
15. Effect of Wet Spinning and Stretching to Enhance Mechanical Properties of Cellulose Nanofiber Filament10.1007/s40684-019-00070-z ↗
16. Influence of Syzygium cumini leaves extract on morphological, thermal, mechanical, and antimicrobial properties of PVA and PVA/chitosan blend films10.1002/app.46188 ↗
17. A Review of Mechanical Properties of Scaffold in Tissue Engineering: Aloe Vera Composites10.1088/1742-6596/1082/1/012080 ↗
18. Resin-free three-layered Ti/PMMA/Ti sandwich materials: Adhesion and formability study10.1016/j.compstruct.2019.03.039 ↗
19. Tough and Osteocompatible Calcium Phosphate Cements Reinforced with Poly(vinyl alcohol) Fibers10.1021/acsbiomaterials.9b00226 ↗
20. Mechanical properties and reinforced mechanism of the stainless steel wire mesh–reinforced Al-matrix composite plate fabricated by twin-roll casting10.1177/1687814017716639 ↗
21. A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials10.1016/j.dt.2018.02.001 ↗
22. Single step 3D printing of bioinspired structures via metal reinforced thermoplastic and highly stretchable elastomer10.1016/j.compstruct.2018.11.019 ↗
23. A review on the mechanical properties of bio waste particulate reinforced polymer composites10.1016/j.matpr.2020.07.360 ↗
24. Ali, N.H., Shihab, S.K., and Mohamed, M.T. (2023). Influence of Ceramic Particles Additives on the Mechanical Properties and Machinability of Carbon Fiber/Polymer Composites. Silicon.10.1007/s12633-023-02449-9 ↗
25. Ageorges, C., and Ye, L. (2002). Fusion Bonding of Polymer Composites, Springer.10.1007/978-1-4471-0171-0 ↗
26. Autohesion of polymers10.1016/j.polymer.2016.05.043 ↗
27. Effect of interfacial crystalline growth on autohesion of PEEK10.1016/j.ijadhadh.2018.11.013 ↗
28. Lab-on-a-chip device made by autohesion-bonded polymers
29. Weidmann, F.C. (2020). On the In-Situ Manufacture of Thermoplastic Sandwich Structures with Continuous Fibre Reinforced Facesheets and Integral Foam Cores. [Doctoral Thesis, Clausthal University of Technology].
30. Newaz, G.M. (1987). Advances in Thermoplastic Matrix Composite Materials, ASTM International.
31. Grouve, W.J.B. (2012). Weld Strength of Laser-Assisted Tape-Placed Thermoplastic Composites, University of Twente.
32. Barocio, E., Brenken, B., Favaloro, A., Ramirez, J., Kunc, V., and Pipes, R.B. (2017, January 23–25). Fusion bonding simulations of semi-crystalline polymer composites in the extrusion deposition additive manufacturing process. Proceedings of the 32nd Technical Conference of the American Society for Composites, West Lafayette, IN, USA.10.12783/asc2017/15395 ↗
33. Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling10.1016/j.matdes.2017.11.027 ↗
34. Voll, N., Meichsner, A., and Maier, M. (2009). Metal Mesh reinforced long Glass Fiber Thermoplastics (M-LFRT)-Comparison of Experiment and Simulation. Edinb. ICCM 17 Proc., Available online: https://iccm-central.org/Proceedings/ICCM17proceedings/papers/ID5.1%20Voll.pdf.
35. Effects of temperature and strain rate on the tensile behavior of short fiber reinforced polyamide-610.1002/pc.10484 ↗
36. A non-linear damage model for the tensile behavior of an injection molded short E-glass fiber reinforced polyamide-6,610.1016/j.msea.2004.10.038 ↗
37. Bone Mechanical Properties in Healthy and Diseased States10.1146/annurev-bioeng-062117-121139 ↗
38. Metal-alike polymer composites: The effect of inter-layer content on the pseudo-ductile behaviour of carbon fibre/epoxy resin materials10.1016/j.compscitech.2021.109002 ↗
39. Steel-Reinforced Polymer: An Innovative and Promising Material for Strengthening Infrastructures
40. Impact strength of surface treated SS316L wires reinforced PMMA10.1515/jmbm-2021-0029 ↗
41. Biological and mechanical properties of PMMA-based bioactive bone cements10.1016/S0142-9612(00)00097-1 ↗
42. PMMA: An Essential Material in Medicine and Dentistry
43. Adhesion Behavior of Ti–PMMA–Ti Sandwiches for Biomedical Applications10.1007/s11837-021-04995-2 ↗
44. Temperature-dependent mechanical behaviour of PMMA: Experimental analysis and modelling
45. Influence of Fiber Orientation and Adhesion Properties On Tailored Fiber-reinforced Elastomers10.1007/s10443-020-09802-w ↗
46. Plastic shear bands and fracture toughness improvements of nanoparticle filled polymers: A multiscale analytical model10.1016/j.compositesa.2013.01.006 ↗
47. Effect of fibre orientation on mechanical properties of carbon fibre composites
48. Improvement in tensile and flexural ductility with the addition of different types of polypropylene fibers in cementitious composites10.1016/j.conbuildmat.2018.05.280 ↗
49. Effect of the fiber orientation on the tensile and flexural behavior of continuous carbon fiber composites made via fused filament fabrication10.1007/s00170-021-06997-5 ↗
50. Effects of fiber orientation and anisotropy on tensile strength and elastic modulus of short fiber reinforced polymer composites10.1016/j.compositesb.2014.11.041 ↗
51. Introducing ductility in hybrid carbon fibre/self-reinforced composites through control of the damage mechanisms10.1016/j.compstruct.2015.04.069 ↗
52. The mechanisms and mechanics of the toughening of epoxy polymers modified with silica nanoparticles10.1016/j.polymer.2010.10.048 ↗
53. In situ generation of sustainable PLA-based nanocomposites by shear induced crystallization of nanofibrillar inclusions10.1039/C9RA05919A ↗
54. Understanding the brittle-ductile transition of glass polymer on mesoscopic scale by in-situ small angle X-ray scattering10.1016/j.polymer.2020.122985 ↗
55. Effect of temperature and strain rate on the formation of shear bands in polymers under quasi-static and dynamic compressive loadings: Proposed constitutive model and numerical validation10.1016/j.polymer.2022.124690 ↗
56. Secondary relaxation, brittle–ductile transition temperature, and chain structure10.1002/app.1992.070460408 ↗
57. Liu, W., and Zhang, L. (2018). Mechanisms of the Complex Thermo-Mechanical Behavior of Polymer Glass Across a Wide Range of Temperature Variations. Polymers, 10.10.3390/polym10101153 ↗
58. Analysis of the bending and failure of fiber metal laminates based on glass and carbon fibers10.1515/secm-2017-0180 ↗