journal article·2025-06-15Open access

Effect of Thermal Aging on Color Stability and Mechanical Properties of High-Density CAD/CAM Polymers Utilized for Provisional Restorations

Rasha Alharthi, Ali Robaian Alqahtani, Abdullah Mohammed Alshehri, Abdulrahman Almalki, Heba Wageh Abozaed, Eman Mohamed Raffat Hussein, Tarek Ahmed Soliman

Abstract

Background: This study evaluated and compared the effects of thermal aging on the color stability and mechanical properties of CAD/CAM polymers utilized for provisional restorations. Material and Methods: Three CAD/CAM polymers in this study: CAD-Temp (CAT), Everest C-Temp (CT), and PEEK (PK). Forty specimens of each material were randomly assigned to two subgroups. Subgroup A was immersed in distilled water for 24 h, whereas Subgroup B was subjected to 5000 thermal cycles. The color stability, flexural strength (FS), survival probability, and microstructures were evaluated following thermal cycling. Data analysis was conducted utilizing two-way ANOVA along with Tukey’s test. Results: The CAT (3.74 ± 0.39) and CT (3.51 ± 0.54) groups exhibited the highest color variations, while PEEK (2.95 ± 0.45) showed the lowest color change. The baseline groups showed that the CT group had the highest flexural strength value (p < 0.05). The flexural strength values of CAT and CT groups significantly decreased (p < 0.05) following thermal cycling. No significant decrease in FS was observed following thermal cycling in the Pk group (p = 0.16). Conclusions: The color measurement and flexural strength outcomes were significantly influenced by CAD/CAM materials and thermal cycling. The CT group demonstrated superior flexural strength compared to the other groups, both before and after thermal cycling. The PK group shows the lowest color change compared to other groups. Regardless of aging condition, C-Temp and PEEK materials recorded the highest survival probability, a 95% significance level compared to CAD-Temp.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Additive Manufacturing and 3D Printing Technologies · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Clinical Dental Science Department, College of Dentistry, Princess Nourah bint Abdulrahman University, Riyadh 11671, Saudi Arabia

Conservative Dental Science Department, College of Dentistry, Prince Sattam bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia

Prosthetic Dental Department, College of Dentistry, Prince Sattam bin Abdulaziz University, Al-Kharj 11942, Saudi Arabia

Prosthetic Dental Department, Faculty of Dentistry, National Benha University, Benha 13511, Egypt

Funding

Prince Sattam Bin Abdulaziz University · Princess Nourah bint Abdulrahman University Researchers Supporting Project

References (48)

Show source-provided references
1. Committee on Research in Fixed Prosthodontics of the Academy of Fixed Prosthodontics. A review of selected dental literature on contemporary provisional fixed prosthodontic treatment: Report of the Committee on Research in Fixed Prosthodontics of the Academy of Fixed Prosthodontics10.1016/S0022-3913(03)00259-2 ↗
2. Management of provisional restorations’ deficiencies: A literature review10.1111/j.1708-8240.2011.00467.x ↗
3. Long-term esthetic provisional restorations in dentistry
4. Effects of staining and bleaching procedures on the optical and surface properties of CAD-CAM materials
5. Mechanical properties of CAD/CAM polylactic acid as a material for interim restoration10.1016/j.heliyon.2023.e15314 ↗
6. Al-Humood, H., Alfaraj, A., Yang, C.C., Levon, J., Chu, T.G., and Lin, W.S. (2023). Marginal Fit, Mechanical Properties, and Esthetic Outcomes of CAD/CAM Interim Fixed Dental Prostheses (FDPs): A Systematic Review. Materials, 16.10.3390/ma16051996 ↗
7. Clinical performance of long-term temporary fixed dental prostheses fabricated from CAD/CAM resin-based composite10.1007/s00784-025-06259-8 ↗
8. Evaluation of Mechanical Behavior of CAD/CAM Polymers for Long-term Interim Restoration Following Artificial Aging
9. Effect of aging on color, gloss and surface roughness of CAD/CAM composite materials10.1016/j.jdent.2023.104423 ↗
10. Color stability of provisional restorative materials with different fabrication methods10.4047/jap.2020.12.5.259 ↗
11. Comparison of Color Stability and Surface Roughness of Interim Crowns Fabri-cated by Conventional, Milling and 3D Printing Methods10.1002/cre2.70119 ↗
12. Effect of surface treatments and flash-free adhesive on the shear bond strength of ceramic orthodontic brackets to CAD/CAM provisional materials10.1007/s00784-021-04022-3 ↗
13. Comparison of fracture strength after thermo-mechanical aging between provisional crowns made with CAD/CAM and conventional method10.4047/jap.2020.12.4.218 ↗
14. Bozoğulları, H.N., and Temizci, T. (2023). Evaluation of the Color Stability, Stainability, and Surface Roughness of Permanent Composite-Based Milled and 3D Printed CAD/CAM Restora-tive Materials after Thermocycling. Appl. Sci., 13.10.3390/app132111895 ↗
15. Alkhadim, Y.K., Hulbah, M.J., and Nassar, H.M. (2020). Color shift, color stability, and post-polishing surface roughness of esthetic resin composites. Materials, 13.10.3390/ma13061376 ↗
16. In vitro evaluation of translucency and color stability of CAD/CAM polymer-infiltrated ceramic materials after accelerated aging10.1111/jopr.13239 ↗
17. Effect of brushing and thermocycling on the shade and surface roughness of CAD-CAM ceramic restorations10.1016/j.prosdent.2017.06.001 ↗
18. Comparison of the flexural strength and marginal accuracy of traditional and CAD/CAM interim materials before and after thermal cycling10.1016/j.prosdent.2014.01.012 ↗
19. Physicomechanical characterization of poly etheretherketone and current esthetic dental CAD/CAM polymers after aging in different storage media10.1016/j.prosdent.2015.09.004 ↗
20. PEEK, and BIOHPP (2021, July 10). Bredent, U.K. The New Class of Materials in Prosthetics. Available online: https://www.bredent.co.uk/wp-content/uploads/2017/02/BioHPP-2013.pdf.
21. Everest C-Temp (2025, June 13). Provisional Restoration. KaVo Elements for KaVo ARCTICA and KaVo Everest. The Foundation for Reliable Long-Term Temporary Applications: C-Temp. IOP Publishing Physics Web. Available online: http://dinamed.by/media/Instrukcii2014/ARCTICA_en_Material.pdf.
22. Porojan, L., Vasiliu, R.D., and Porojan, S.D. (2022). Masking Abilities of Dental Cad/Cam Resin Composite Materials Related to Substrate and Luting Material. Polymers, 14.10.3390/polym14030364 ↗
23. Long-term effects of seven cleaning methods on light transmit-tance, surface roughness, and flexural modulus of polyurethane retainer material10.2319/081517-551.1 ↗
24. Porojan, L., Vasiliu, R.D., and Porojan, S.D. (2020). Surface Quality Evaluation of Removable Thermo-plastic Dental Appliances Related to Staining Beverages and Cleaning Agents. Polymers, 12.10.3390/polym12081736 ↗
25. (2020). Dentistry-Polymer-Based Crown and Veneering Materials (Standard No. ISO 10477). Available online: https://www.iso.org/standard/80007.html.
26. Material properties and fractography of an indirect dental resin composite10.1016/j.dental.2010.02.008 ↗
27. Mechanical properties of resin-ceramic CAD/CAM restorative materials10.1016/j.prosdent.2015.04.016 ↗
28. Flexural strength and Weibull analysis of a microhybrid and a nanofill composite evaluated by 3- and 4-point bending tests10.1016/j.dental.2007.05.013 ↗
29. Comparison of interim restorations fabricated by CAD/CAM with those fabricated manually10.1016/j.prosdent.2015.03.007 ↗
30. Haralur, S.B., Albarqi, A.T., Alamodi, A.G., Alamri, A.A., Aldail, S.A., Al-Qarni, M.A., AlQahtani, S.M., and Alqahtani, N.M. (2024). Comparison of Various Surface Treatment Procedures on the Roughness and Susceptibility to Staining of Provisional Prosthodontic Materials. J. Funct. Biomater., 15.10.3390/jfb15090256 ↗
31. Discoloration and translucency changes of CAD-CAM materials after exposure to beverages10.1016/j.prosdent.2019.01.009 ↗
32. CAD/ CAM-generated high-density polymer restorations for the pretreatment of complex cases: A case report
33. CAD/CAM systems available for the fabrication of crown and bridge restorations10.1111/j.1834-7819.2010.01300.x ↗
34. Effect of accelerated staining and bleaching on chairside CAD/CAM materials with high and low translucency10.4012/dmj.2018-335 ↗
35. Discoloration of PMMA, composite, and PEEK10.1007/s00784-016-1892-2 ↗
36. Color stability and surface roughness of a laboratory-processed composite resin as a function of mouthrinse10.1111/jerd.12167 ↗
37. Color difference thresholds in dentistry10.1111/jerd.12149 ↗
38. Color acceptance of direct dental restorative materials by human observers10.1002/1520-6378(200008)25:4<278::AID-COL8>3.0.CO;2-F ↗
39. Color stability of dental composite resin materials for crown and bridge veneers10.1016/S0109-5641(87)80081-7 ↗
40. Assessment of appearance match by visual observation and clinical colorimetry10.1177/00220345890680051301 ↗
41. Porojan, L., Toma, F.R., Bîrdeanu, M.I., Vasiliu, R.D., Uțu, I.D., and Matichescu, A. (2022). Surface Characteristics and Color. Stability of Denta PEEK Related to Water Saturation and Thermal Cycling. Polymers, 14.10.3390/polym14112144 ↗
42. da Silva, E.M., Amaral, C.M., Jardim, R.N., Barbosa, M.P., and Rabello, T.B. (2024). Influence of Specimen Dimension, Water Immersion Protocol, and Surface Roughness on Water Sorption and Solubility of Res-in-Based Restorative Materials. Materials, 17.10.3390/ma17050984 ↗
43. Can Fiber-reinforced Composites Increase the Fracture Resistance of Direct Composite Restorations in Structurally Compromised Teeth? A Systematic Review and Meta-analysis of Laboratory Studies10.2341/24-032-LIT ↗
44. Lassila, L., Säilynoja, E., Prinssi, R., Vallittu, P.K., and Garoushi, S. (2020). Fracture behavior of Bi-structure fiber-reinforced composite restorations. J. Mech. Behav. Biomed. Mater., 101.10.1016/j.jmbbm.2019.103444 ↗
45. Evaluation of physical properties of fiber-reinforced composite resin10.1016/j.dental.2020.04.012 ↗
46. Papathanasiou, I., Kamposiora, P., Papavasiliou, G., and Ferrari, M. (2020). The use of PEEK in digital prosthodontics: A narrative review. BMC Oral Health, 20.10.1186/s12903-020-01202-7 ↗
47. Influence of accelerated ageing on the physical properties of CAD/CAM restorative materials10.1007/s00784-019-03101-w ↗
48. Flexural Strength of Various Provisional Restorative Materials for Rehabilitation After Aging10.1111/jopr.13549 ↗