Anodic Production and Characterization of Biomimetic Oxide Layers on Grade 4 Titanium for Medical Applications
Source abstract
Abstract
Biomaterials are the basis for the development of medicine because they allow safe contact with a living organism. The aim of this work was to produce innovative oxide layers with a microporous structure on the surface of commercially pure titanium Grade 4 (CpTi G4) and to characterize their properties as drug carriers. The anodization of the CpTi G4 subjected to mechanical grinding and electrochemical polishing was carried out in a solution of 1M ethylene glycol with the addition of 40 g of ammonium fluoride at a voltage of 20 V for 2, 18, 24, and 48 h at room temperature. It was found that the longer the anodization time, the greater the number of pores formed on the CpTi G4 surface as revealed using the FE-SEM method, and the greater the surface roughness determined in profilometric tests. As the anodizing time increases, the amount of the drug in the form of gentamicin sulfate incorporated into the resulting pores decreases. The most favorable drug release kinetics profile determined via UV–VIS absorption spectroscopy was found for the CpTi G4 anodized for 2 h.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Anodic Oxide Films and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Materials Engineering, Faculty of Science and Technology, University of Silesia in Katowice, 41-500 Chorzow, Poland
References (57)
Show source-provided references
1. Kumar, A., Dhinasekaran, D., Savina, I., and Han, S.S. (2024). Functional Biomaterials Advances in Design and Biomedical Applications, CRC Press. [1st ed.].10.1201/9781003251767 ↗
2. Motoyoshi, M. (2022). Current Techniques and Materials in Dentistry, MDPI AG.10.3390/books978-3-0365-4414-4 ↗
3. Froes, F., and Qian, M. (2018). Titanium in Medical and Dental Applications, Elsevier.
4. Łosiewicz, B., Osak, P., Maszybrocka, J., Kubisztal, J., and Stach, S. (2020). Effect of Autoclaving Time on Corrosion Resistance of Sandblasted Ti G4 in Artificial Saliva. Materials, 13.10.3390/ma13184154 ↗
5. Osak, P., Maszybrocka, J., Kubisztal, J., Ratajczak, P., and Łosiewicz, B. (2021). Long-Term Assessment of the In Vitro Corrosion Resistance of Biomimetic ACP Coatings Electrodeposited from an Acetate Bath. J. Funct. Biomater., 12.10.3390/jfb12010012 ↗
6. Ti-Based Biomaterials (2020). Ti-Based Biomaterials, MDPI.
7. Biomedical materials: A review of titanium based alloys
8. Evaluation of corrosion resistance of nanotubular oxide layers on the Ti13Zr13Nb alloy in physiological saline solution10.1515/amm-2015-0432 ↗
9. The influence of passivation type on corrosion resistance of Ti15Mo alloy in simulated body fluids10.1515/amm-2015-0433 ↗
10. Electrochemical formation of self-organized nanotubular oxide layers on Ti13Zr13Nb alloy for biomedical applications10.12693/APhysPolA.125.932 ↗
11. (2017). Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) (Standard No. ASTM F67-13).
12. (2018). Implants for Surgery−Metallic Materials−Part 2: Unalloyed Titanium (Standard No. ISO 5832-2:2018-08).
13. (2017). Dentistry. Implants. Dynamic Fatigue Test for Endosseous Dental Implants (Standard No. ISO 14801:2017-02).
14. Fousová, M., Vojtech, D., Jablonska, E., Fojt, J., and Lipov, J. (2017). Novel Approach in the Use of Plasma Spray: Preparation of Bulk Titanium for Bone Augmentations. Materials, 10.10.3390/ma10090987 ↗
15. Fintová, S., Kuběna, I., Palán, J., Mertová, K., Duchek, M., Hutař, P., Pastorek, F., and Kunz, L. (2020). Influence of Sandblasting and Acid Etching on Fatigue Properties of Ultra-Fine Grained Ti Grade 4 for Dental Implants. J. Mech. Behav. Biomed. Mater., 111.10.1016/j.jmbbm.2020.104016 ↗
16. Sol-Gel Derived Porous and Hydrophilic Calcium Hydroxyapatite Coating on Modified Titanium Substrate10.1016/j.surfcoat.2016.10.032 ↗
17. Electrochemical Deposition and Characterization of Hydroxyapatite (HAp) on Titanium Substrate10.1016/j.apcbee.2012.06.044 ↗
18. Petrini, M., Giuliani, A., Di Campli, E., Di Lodovico, S., Iezzi, G., Piattelli, A., and D’Ercole, S. (2020). The Bacterial Anti-Adhesive Activity of Double-Etched Titanium (DAE) as a Dental Implant Surface. Int. J. Mol. Sci., 21.10.3390/ijms21218315 ↗
19. Kim, H.-K., and Ahn, B. (2021). Effect of Al2O3 Sandblasting Particle Size on the Surface Topography and Residual Compressive Stresses of Three Different Dental Zirconia Grades. Materials, 14.10.3390/ma14030610 ↗
20. Romero-Ruiz, M.M., Gil-Mur, F.J., Ríos-Santos, J.V., Lázaro-Calvo, P., Ríos-Carrasco, B., and Herrero-Climent, M. (2019). Influence of a Novel Surface of Bioactive Implants on Osseointegration: A Comparative and Histomorfometric Correlation and Implant Stability Study in Minipigs. Int. J. Mol. Sci., 20.10.3390/ijms20092307 ↗
21. Oxides Formed on Titanium by Polishing, Etching, Anodizing, or Thermal Oxidizing10.5006/1.3280511 ↗
22. Bioactivity and Osteogenic Cell Response of TiO2 Nanotubes Coupled with Nanoscale Calcium Phosphate via Ultrasonification-Assisted Electrochemical Deposition10.1016/j.apsusc.2014.02.148 ↗
23. Bone Formation at Titanium Porous Oxide (TiUnite (TM)) Oral Implants in Type IV Bone10.1111/j.1600-0501.2004.01086.x ↗
24. Investigations into the Structure of PEO-Layers for Understanding of Layer Formation10.1016/j.apsusc.2018.02.232 ↗
25. Adepu, S., and Ramakrishna, S. (2021). Controlled Drug Delivery Systems: Current Status and Future Directions. Molecules, 26.10.3390/molecules26195905 ↗
26. Meng, F., Yin, Z., Ren, X., Geng, Z., and Su, J. (2022). Construction of Local Drug Delivery System on Titanium-Based Implants to Improve Osseointegration. Pharmaceutics, 14.10.3390/pharmaceutics14051069 ↗
27. Ma, X., Gao, Y., Zhao, D., Zhang, W., Zhao, W., Wu, M., Cui, Y., Li, Q., Zhang, Z., and Ma, C. (2022). Titanium Implants and Local Drug Delivery Systems Become Mutual Promoters in Orthopedic Clinics. Nanomaterials, 12.10.3390/nano12010047 ↗
28. TiO2 Nanotubes: Synthesis and Applications10.1002/anie.201001374 ↗
29. Interfacial Barrier Layer Properties of Three Generations of TiO2 Nanotube Arrays10.1016/j.electacta.2014.04.086 ↗
30. Surface functionalization of anodized tantalum with Mn3O4 nanoparticles for effective corrosion protection in simulated inflammatory condition10.1016/j.ceramint.2021.10.088 ↗
31. Anodization of medical grade stainless steel for improved corrosion resistance and nanostructure formation targeting biomedical applications10.1016/j.electacta.2022.140274 ↗
32. Ribeiro, A.C.F., Nicolau, P.M.G., and Fangaia, S.I.G. (2022). Advanced Studies on Drug Delivery Systems: Characterization and Their Impact on Pharmaceutical and Medicinal Areas. Processes, 10.10.3390/pr10112427 ↗
33. Porous TiO2 films on Ti implants for controlled release of tetracycline-hydrochloride (TCH)10.1016/j.tsf.2011.06.013 ↗
34. Thermo-sensitive hydrogel on anodized titanium surface to regulate immune response10.1016/j.surfcoat.2020.126624 ↗
35. jPOR: An ImageJ Macro to Quantify Total Optical Porosity from Blue-Stained Thin Sections10.1016/j.cageo.2011.03.002 ↗
36. (2024, June 08). NOVOTEST. Available online: http://novotest.biz/coating-thickness-gauge-novotest-tp-2020.
37. (2022). Geometrical Product Specifications (GPS)—Surface Texture: Profile—Part 3: Specification Operators (Standard No. ISO 21920-3:2022-06).
38. Pharmaceuticals (2024, April 20). Gentamicin Sulfate Injection, USP. Available online: https://www.vaccineshoppe.com/us/vsh/en/USD/Product-Catalog/Pharmaceuticals/Gentamicin-Sulfate-Injection-USP/p/1207-03.
39. (2024, April 20). Gentamycin Sulfate. Available online: https://www.abmole.com/products/gentamycin-sulfate.html.
40. Molly Varga Smith (2023). Textbook of Rabbit Medicine, Elsevier Ltd.. [3rd ed.].
41. (2024, April 20). Bone Cortial And Cancellous. Available online: https://www.physio-pedia.com/Bone_Cortical_And_Cancellous.
42. Jiao, J., Hong, Q., Zhang, D., Wang, M., Tang, H., Yang, J., Qu, X., and Yue, B. (2023). Influence of Porosity on Osteogenesis, Bone Growth and Osteointegration in Trabecular Tantalum Scaffolds Fabricated by Additive Manufacturing. Front. Bioeng. Biotechnol., 11.10.3389/fbioe.2023.1117954 ↗
43. Lubojanski, A., Piesiak-Panczyszyn, D., Zakrzewski, W., Dobrzynski, W., Szymonowicz, M., Rybak, Z., Mielan, B., Wiglusz, R.J., Watras, A., and Dobrzynski, M. (2023). The Safety of Fluoride Compounds and Their Effect on the Human Body—A Narrative Review. Materials, 16.10.3390/ma16031242 ↗
44. Grainger, D.W. (2020). Fluorinated Biomaterials. Biomaterials Science, Elsevier Ltd.. [4th ed.]. An Introduction to Materials in Medicine.10.1016/B978-0-12-816137-1.00012-X ↗
45. The effects of fluoride on cell migration, cell proliferation, and cell metabolism in GH4C1 pituitary tumour cells10.1016/j.toxlet.2009.07.014 ↗
46. Cruz, H.V., Henriques, M., Teughels, W., Celis, J., and Rocha, L.A. (2015). Combined Influence of Fluoride and Biofilms on the Biotribocorrosion Behavior of Titanium Used for Dental Applications. J. Bio Tribo Corros., 1.10.1007/s40735-015-0021-0 ↗
47. Effects of fluoride-ion-implanted titanium surface on the cytocompatibility in vitro and osseointegatation in vivo for dental implant applications10.1016/j.colsurfb.2015.09.039 ↗
48. Improvement in antibacterial properties and cytocompatibility of titanium by fluorine and oxygen dual plasma-based surface modification10.1016/j.apsusc.2018.08.194 ↗
49. Biofilm formation and release of fluoride from dental restorative materials in relation to their surface properties10.1016/j.jdent.2017.02.005 ↗
50. A Novel Method for Biosynthesis of Different Polymorphs of TiO2 Nanoparticles as a Protector for Bacillus Thuringiensis from Ultra Violet10.1038/s41598-019-57407-6 ↗
51. Wetting Properties of Titanium Oxides, Oxynitrides and Nitrides Obtained by DC and Pulsed Magnetron Sputtering and Cathodic Arc Evaporation10.2478/msp-2019-0031 ↗
52. A Simple Approach on Synthesis of TiO2 Nanoparticles and Its Application in Dye Sensitized Solar Cells10.21272/jnep.9(4).04005 ↗
53. Early Biofilm Formation on Rough and Smooth Titanium Specimens: A Systematic Review of Clinical Studies
54. Fatigue strength reduction of titanium alloy Ti-6Al-4V due to electrocautery contact
55. Stepanovska, J., Matejka, R., Otahal, M., Rosina, J., and Bacakova, L. (2020). The Effect of Various Surface Treatments of Ti6Al4V on the Growth and Osteogenic Differentiation of Adipose Tissue-Derived Stem Cells. Coatings, 10.10.3390/coatings10080762 ↗
56. Modeling of diffusion controlled drug delivery10.1016/j.jconrel.2011.10.006 ↗
57. Łosiewicz, B., Stróż, A., Osak, P., Maszybrocka, J., Gerle, A., Dudek, K., Balin, K., Łukowiec, D., Gawlikowski, M., and Bogunia, S. (2021). Production, Characterization and Application of Oxide Nanotubes on Ti–6Al–7Nb Alloy as a Potential Drug Carrier. Materials, 14.10.3390/ma14206142 ↗