journal article·2025-07-16Open access

Effects of Different Surface Treatments and Accelerated Aging on Dental Zirconia—An In Vitro Study

Mihaela Pantea, Lucian Toma Ciocan, Vlad Gabriel Vasilescu, Georgeta Voicu, Adrian-Ionut Nicoară, Florin Miculescu, Robert Ciocoiu, Ana Maria Cristina Țâncu, Elena Georgiana Banu, Marina Imre

Abstract

This in vitro study aimed to compare the effects of various surface treatments and hydrothermal aging on the phase composition, microstructure, and compressive strength of dental zirconia (ZrO2). Forty-eight zirconia cubes (8 × 8 × 8 mm) were fabricated using CAD/CAM from two materials: infrastructure zirconia (Group S1) and super-translucent multilayered monolithic zirconia (Group S2). Four samples of each material were analyzed in their pre-sintered state (S1-0, S2-0). The remaining specimens were sintered and assigned to sub-groups based on surface treatment: untreated, sandblasted with 30 µm or 50 µm Al2O3, polished, or polished and glazed. Characterization was performed using EDX, SEM, XRD with Rietveld refinement, Raman spectroscopy, and compressive testing before and after accelerated hydrothermal aging, according to EN ISO 13356:2015. EDX revealed a higher yttria content in monolithic zirconia (10.57 wt%) than in infrastructure zirconia (6.51 wt%). SEM images showed minimal changes in polished samples but clear surface damage after sandblasting, which was more pronounced with larger abrasive particles. XRD and Raman confirmed that sandblasting promoted the tetragonal (t-ZrO2) to monoclinic (m-ZrO2) phase transformation (t→m), amplified further by hydrothermal aging. The polished groups showed greater phase stability post-aging. Compressive strength decreased in all treated and aged samples, with monolithic zirconia being more affected. Polished samples displayed the best surface quality and structural resilience across both materials. These findings underline the impact of clinical surface treatments on zirconia’s long-term mechanical and structural behavior.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Prosthodontics, Faculty of Dentistry, “Carol Davila” University of Medicine and Pharmacy, 37 Dionisie Lupu Street, District 2, 020021 Bucharest, Romania

Department of Dental Prostheses Technology, Faculty of Dentistry, “Carol Davila” University of Medicine and Pharmacy, 37 Dionisie Lupu Street, District 2, 020021 Bucharest, Romania

Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Chemical Engineering and Biotechnologies, National University of Science and Technology Politehnica Bucharest, 011061 Bucharest, Romania

Faculty of Material Science and Engineering, National University of Science and Technology Politehnica Bucharest, 011061 Bucharest, Romania

References (49)

Show source-provided references
1. Dental ceramics: A review of new materials and processing methods10.1590/1807-3107bor-2017.vol31.0058 ↗
2. Alqutaibi, A.Y., Ghulam, O., Krsoum, M., Binmahmoud, S., Taher, H., Elmalky, W., and Zafar, M.S. (2022). Revolution of Current Dental Zirconia: A Comprehensive Review. Molecules, 27.10.3390/molecules27051699 ↗
3. Kim, H.-K. (2020). Optical and Mechanical Properties of Highly Translucent Dental Zirconia. Materials, 13.10.3390/ma13153395 ↗
4. Advances in zirconia-based dental materials: Properties, classification, applications, and future prospects10.1016/j.jdent.2024.105111 ↗
5. Current classification of zirconia in dentistry: An updated review10.7717/peerj.15669 ↗
6. (2015). Implants for Surgery—Ceramic Materials Based on Yttria-Stabilized Tetragonal Zirconia (Y-TZP) (Standard No. ISO 13356:2015). Available online: https://www.iso.org/standard/62373.html.
7. Cho, Y.-E., Lim, Y.-J., Han, J.-S., Yeo, I.-S.L., and Yoon, H.-I. (2020). Effect of Yttria Content on the Translucency and Masking Ability of Yttria-Stabilized Tetragonal Zirconia Polycrystal. Materials, 13.10.3390/ma13214726 ↗
8. Randomized controlled clinical trial of zirconia-ceramic and metal-ceramic posterior fixed dental prostheses: A 3-year follow-up
9. The Effect of Resin Bonding on Long-Term Success of High-Strength Ceramics10.1177/0022034517729134 ↗
10. Effect of zirconia surface treatment, resin cement and aging on the load-bearing capacity under fatigue of thin simplified full-contour Y-TZP restorations10.1016/j.jmbbm.2019.04.050 ↗
11. The Tetragonal-Monoclinic Transformation in Zirconia: Lessons Learned and Future Trends10.1111/j.1551-2916.2009.03278.x ↗
12. Aging of 3Y-TZP dental zirconia and yttrium depletion10.1016/j.dental.2017.07.011 ↗
13. Effect of hydrothermal aging on color stability and translucency of two zirconia generations compared to lithium disilicate ceramics10.34172/joddd.41227 ↗
14. Bergamo, E.T., Campos, T.M., Lopes, A.C., Cardoso, K.B., Gouvea, M.V., de Araújo-Júnior, E.N., Witek, L., Gierthmühlen, P.C., Coelho, P.G., and Jalkh, E.B.B. (2021). Hydrothermal aging affects the three-dimensional fit and fatigue lifetime of zirconia abutments. J. Mech. Behav. Biomed. Mater., 124.10.1016/j.jmbbm.2021.104832 ↗
15. (2024, June 17). Available online: https://www.krbec.cz/uws_files/ke_stazeni/imes_icore_dental_catalogue_en_2018.pdf.
16. (2024, June 17). Available online: http://colombschell.fr/wp-content/uploads/2015/07/SDB_CORiTEC-Zr-transpa_lmil-chh-ch_Rev_1.2-eng.pdf.
17. (2024, June 17). Available online: https://www.ivoclar.com/en_li/products/equipment/programat-sinter-furnace-s2.
18. The Use of CAD/CAM in Dentistry10.1016/j.cden.2011.02.011 ↗
19. (2024, March 20). Available online: https://www.ivoclar.com/ro_ro/products/accessories/optragloss.
20. The Effect of a Polishing Protocol on the Surface Roughness of Zirconium Oxide10.11607/ijp.6686 ↗
21. Fischer, N.G., Wong, J., Baruth, A., and Cerutis, D.R. (2017). Effect of Clinically Relevant CAD/CAM Zirconia Polishing on Gingival Fibroblast Proliferation and Focal Adhesions. Materials, 10.10.3390/ma10121358 ↗
22. Surface modification techniques for zirconia-based bioceramics: A review10.4103/JPBS.JPBS_45_19 ↗
23. A straightforward technique to obtain a subgingival nonglazed polished zirconia area in monolithic implant-supported prostheses10.1016/j.prosdent.2020.07.030 ↗
24. Roy, M., Corti, A., Daniele, S., Martini, C., Cavallini, C., Piosik, A., Pompella, A., and Roy, R.A. (2021). Early changes of ECM-related gene expression in fibroblasts cultured on TiO2, ZrO2 and PEEK: The beneficial effects of UVC photofunctionalization. J. Photochem. Photobiol., 6.10.1016/j.jpap.2021.100023 ↗
25. Razali, M., Ngeow, W.C., Omar, R.A., and Chai, W.L. (2021). An In-Vitro Analysis of Peri-Implant Mucosal Seal Following Photofunctionalization of Zirconia Abutment Materials. Biomedicines, 9.10.3390/biomedicines9010078 ↗
26. Wen, Y., Dong, H., Lin, J., Zhuang, X., Xian, R., Li, P., and Li, S. (2023). Response of Human Gingival Fibroblasts and Porphyromonas gingivalis to UVC-Activated Titanium Surfaces. J. Funct. Biomater., 14.10.3390/jfb14030137 ↗
27. Nd-YAG Laser Texturing of Zirconia Implant Surfaces10.1007/s40516-022-00191-5 ↗
28. Morphology, proliferation, and gene expression of gingival fibroblasts on Laser-Lok, titanium, and zirconia surfaces10.1007/s10103-016-1927-6 ↗
29. Time-dependent reactive oxygen species inhibit Streptococcus mutans growth on zirconia after a helium cold atmospheric plasma treatment10.1016/j.msec.2020.111633 ↗
30. Comparison of different cleaning procedures to decontaminate zirconium oxide surface after polishing
31. Zühlke, A., Gasik, M., Shahramian, K., Närhi, T., Bilotsky, Y., and Kangasniemi, I. (2021). Enhancement of Gingival Tissue Adherence of Zirconia Implant Posts: In Vitro Study. Materials, 14.10.3390/ma14020455 ↗
32. Areid, N., Riivari, S., Abushahba, F., Shahramian, K., and Närhi, T. (2023). Influence of Surface Characteristics of TiO2 Coatings on the Response of Gingival Cells: A Systematic Review of In Vitro Studies. Materials, 16.10.3390/ma16062533 ↗
33. Wang, C., Wang, X., Lu, R., Gao, S., Ling, Y., and Chen, S. (2021). Responses of human gingival fibroblasts to superhydrophilic hydrogenated titanium dioxide nanotubes. Colloids Surf. B Biointerfaces, 198.10.1016/j.colsurfb.2020.111489 ↗
34. Optimizing the Surface Properties of Zirconium Implants with Germanium Coating
35. Promotional Effect and Molecular Mechanism of Synthesized Zinc Oxide Nanocrystal on Zirconia Abutment Surface for Soft Tissue Sealing10.1177/00220345221150161 ↗
36. Maruo, Y., Yoshihara, K., Irie, M., Nishigawa, G., Nagaoka, N., Matsumoto, T., and Minagi, S. (2020). Flexural properties, bond ability, and crystallographic phase of highly translucent multi-layered zirconia. J. Appl. Biomater. Funct. Mater., 18.10.1177/2280800020942717 ↗
37. Effect of different surface and heat treatments on the surface roughness, crystallography, and phase composition of high translucency zirconia for monolithic restorations10.1016/j.prosdent.2023.09.038 ↗
38. Comparative effects of glazing versus polishing on mechanical, optical, and surface properties of zirconia ceramics with different translucencies10.1002/cre2.884 ↗
39. The effect of adjustment and finishing procedure on roughness, strength, and phase transformation of monolithic zirconia10.1007/s00784-022-04440-x ↗
40. Sarabi, N., Mohammadi-Bassir, M., Fadavi, F., Rezvani, M.B., Dehestani-Ardakani, F., and Labbaf, H. (2024). Effect of Hydrothermal, Chemical, and Mechanical Degradation on Flexural Strength and Phase Transformation of Ground, Glazed, and Polished Zirconia. Front. Dent., 21.10.18502/fid.v21i16.15483 ↗
41. The mechanical behavior of high-translucent monolithic zirconia after adjustment and finishing procedures and artificial aging10.1016/j.prosdent.2018.12.013 ↗
42. Effect of finishing/polishing techniques and low temperature degradation on the surface topography, phase transformation and flexural strength of ultra-translucent ZrO2 ceramic10.1016/j.dental.2020.01.004 ↗
43. Transparent tetragonal-cubic zirconia composite ceramics densified by spark plasma sintering and hot isostatic pressing10.1016/j.jeurceramsoc.2018.12.004 ↗
44. ZnO·2.7 Al2O3 nanocomposite with high optical transparency10.1111/jace.18397 ↗
45. Effect of different polishing techniques on surface properties and bacterial adhesion on resin-ceramic CAD/CAM materials10.1007/s00784-022-04497-8 ↗
46. Effect of various polishing burs on surface roughness and bacterial adhesion in pediatric zirconia crowns10.4012/dmj.2018-106 ↗
47. Surface roughness and bacteria adhesion of full zirconia restoration after different polishing treatment
48. Toma, F.R., Porojan, S.D., Vasiliu, R.D., and Porojan, L. (2023). The Effect of Polishing, Glazing, and Aging on Optical Characteristics of Multi-Layered Dental Zirconia with Different Degrees of Translucency. J. Funct. Biomater., 14.10.3390/jfb14020068 ↗
49. Is zirconia surface etching a viable alternative to airborne particle abrasion? A systematic review and meta-analysis of in vitro studies10.1016/j.jdent.2024.105394 ↗