Calcium Silicate Promoting the Upcycling Potential of Polysulfone Medical Waste in Load-Bearing Applications
Source abstract
Abstract
Polysulfone (PSF) medical waste can be effectively repurposed due to its excellent mechanical properties. Due to the increasing need for load-bearing bone implants, it is crucial to prioritize the development of biocompatible polymer–matrix composites. Calcium silicate (CaSi), known for its osteogenesis and antibacterial properties, is widely used in medical applications. In this study, recycled PSF plastics in fiber or nanoparticle forms and commercial PSF products were used to create PSF-based composites filled with three different amounts (10, 20, and 30 vol%) of CaSi. The green compact was heat-treated at various temperatures. Experimental results showed that the mechanical interlocking of the PSF matrix and CaSi filler occurred due to the liquefaction of PSF fibers or nanoparticles during heat treatment. When the composite contained 20% CaSi, the obtained three-point bending strength exceeded 60 MPa, falling within the reported strength of compact bone. There was a concurrent improvement in the biocompatibility and antibacterial activity of the PSF-based composites with the increasing amount of CaSi. Considering their mechanical properties and antibacterial activity, the 20% CaSi-containing PSF-based composites treated at 240 °C emerged as a promising candidate for bone implant applications. This study demonstrated the feasibility of upcycling medical waste such as PSF as a matrix, opening doors for its potential usage in the medical field.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Healthcare and Environmental Waste Management · Recycled Aggregate Concrete Performance · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Oral Science, Chung Shan Medical University, Taichung City 402, Taiwan
School of Dentistry, Chung Shan Medical University, Taichung City 402, Taiwan
Department of Stomatology, Chung Shan Medical University Hospital, Taichung City 402, Taiwan
Funding
National Science and Technology Council of Taiwan
References (75)
Show source-provided references
1. Plastic Waste Inputs from Land into the Ocean10.1126/science.1260352 ↗
2. Healable and recyclable polymeric materials with high mechanical robustness10.1021/acsmaterialslett.1c00795 ↗
3. (2022, January 01). Available online: https://www.tsn.org.tw/twrds.html?page=&year=2022#.
4. Performance of polysulfone membrane dialyzers and dialysate flow pattern10.1007/s10157-006-0431-x ↗
5. Developing UV-light driven photocatalytic PSf/Ni-doped ZnO/PDA membrane with superior antifouling, self-cleaning, and self-protecting performances for handmade batik wastewater treatment
6. Blends based on ionic polysulfones with improved conformational and microstructural characteristics: Perspectives for biomedical applications10.1016/j.compositesb.2016.02.062 ↗
7. Complement activation during hemodialysis. Comparison of polysulfone and cuprophan membranes10.1159/000410772 ↗
8. Release of leukocyte elestase during hemodialysis. Effect of different dialysis membranes10.1159/000410773 ↗
9. Nechifor, G., Totu, E.E., Nechifor, A.C., Isildak, I., Oprea, O., and Cristache, C.M. (2019). Non-resorbable nanocomposite membranes for guided bone regeneration based on polysulfone-quartz fiber grafted with nano-TiO2. Nanomaterials, 9.10.3390/nano9070985 ↗
10. Corrosion of metal orthopaedic implants10.2106/00004623-199802000-00015 ↗
11. Mechanical properties and strength retention of carbon fibre-reinforced liquid crystalline polymer (LCP/CF) composite: An experimental study on rabbits10.1016/S0142-9612(98)00027-1 ↗
12. Acid-resistant calcium silicate-based composite implants with high-strength as load-bearing bone graft substitutes and fracture fixation devices10.1016/j.jmbbm.2016.05.019 ↗
13. Chen, C.-F., Chou, Y.-S., Lee, T.-M., Fu, Y.-C., Ou, S.-F., Chen, S.-H., Lee, T.-C., and Wang, Y.-H. (2024). The uniform distribution of hydroxyapatite in a polyurethane foam-based scaffold (PU/HAp) to enhance bone repair in a calvarial defect model. Int. J. Mol. Sci., 25.10.3390/ijms25126440 ↗
14. Foreign body reactions to resorbable poly(l-lactide) bone plates and screws used for the fixation of unstable zygomatic fractures10.1016/S0278-2391(10)80267-8 ↗
15. Composites for bone repair: Phosphate glass fibre reinforced PLA with varying fibre architecture10.1007/s10856-011-4361-0 ↗
16. Biomaterials in orthopaedics10.1098/rsif.2008.0151 ↗
17. Bioinert, biodegradable and injectable polymeric matrix composites for hard tissue replacement: State of the art and recent developments10.1016/j.compscitech.2003.09.001 ↗
18. Poly(glycolic acid) (PGA): A versatile building block expanding high performance and sustainable bioplastic applications10.1039/D0GC01394C ↗
19. Chemically coupled hydroxyapatite–polyethylene composites: Structure and properties10.1016/S0142-9612(00)00283-0 ↗
20. Initial attachment of osteoblasts to an optimised HAPEX topography10.1016/S0142-9612(01)00156-9 ↗
21. Strategies to improve the performance of polyetheretherketone (PEEK) as orthopedic implants: From surface modification to addition of bioactive materials10.1039/D3TB02740F ↗
22. Processing, properties, and in vitro bioactivity of polysulfone-bioactive glass composites
23. Production and evaluation of hydroxyapatite reinforced polysulfone for tissue replacement10.1023/A:1017933220894 ↗
24. Biodegradation behavior of chitosan/calcium phosphate composites10.1016/j.jnoncrysol.2007.04.020 ↗
25. Fabrication of polymethyl methacrylate/polysulfone/nanoceramic composites for orthopedic applications10.1002/app.37581 ↗
26. Thermomechanical evaluation of zinc oxide/hydroxyapatite/high-density polyethylene hybrid composites10.1002/app.55683 ↗
27. Cao, J., Yang, S., Liao, Y., Wang, Y., He, J., Xiong, C., Shi, K., and Hu, X. (2023). Evaluation of polyetheretherketone composites modified by calcium silicate and carbon nanotubes for bone regeneration: Mechanical properties, biomineralization and induction of osteoblasts. Front. Bioeng. Biotechnol., 11.10.3389/fbioe.2023.1271140 ↗
28. Processing and mechanical properties of hydroxyapatite–polysulfone laminated composites10.1016/j.jeurceramsoc.2013.11.002 ↗
29. Bioactive glass fiber/polymeric composites bond to bone tissue10.1002/(SICI)1097-4636(199801)39:1<161::AID-JBM18>3.0.CO;2-I ↗
30. Stem cell differentiation-induced calcium silicate cement with bacteriostatic activity10.1039/C4TB01617C ↗
31. Antibacterial ability and osteogenic activity of polyphenols-tailored calcium silicate bone cement10.1039/D2TB00944G ↗
32. Fabrication of nano-structured calcium silicate coatings with enhanced stability, bioactivity and osteogenic and angiogenic activity10.1016/j.colsurfb.2014.11.044 ↗
33. In vitro and in vivo osteogenesis of gelatin-modified calcium silicate cement with washout resistance10.1016/j.msec.2020.111297 ↗
34. Edanami, N., Takenaka, S., Ibn Belal, R.S., Yoshiba, K., Takahara, S., Yoshiba, N., Ohkura, N., and Noiri, Y. (2023). In vivo assessment of the apatite-forming ability of new-generation hydraulic calcium silicate cements using a rat subcutaneous implantation model. J. Funct. Biomater., 14.10.21203/rs.3.rs-2030069/v2 ↗
35. In vitro comparisons of microscale and nanoscale calcium silicate particles10.1039/D0TB01202E ↗
36. Huang, Y.H., Wu, I.T., Chen, C.C., and Ding, S.J. (2024). Synergistic effect of polyethylene glycol and lactic acid on handling properties and antibacterial efficacy of premixed calcium silicate cement. J. Funct. Biomater., 15.10.3390/jfb15070187 ↗
37. Regenerative and protective effects of calcium silicate on senescent fibroblasts induced by high glucose10.1111/wrr.12794 ↗
38. Fabrication and characterization of polysulfone–dicalcium silicate composite films10.1177/0885328206054712 ↗
39. Progress in dental materials: Application of natural ingredients10.59761/RCR5108 ↗
40. A primary study into graphene/polyether ether ketone (PEEK) nanocomposite for laser sintering10.1016/j.apsusc.2017.09.226 ↗
41. High performance of polysulfone/graphene oxide-silver nanocomposites with excellent antibacterial capability for medical applications10.1016/j.mtcomm.2021.102297 ↗
42. Fiaschini, N., Giuliani, C., Vitali, R., Tammaro, L., Valerini, D., and Rinaldi, A. (2022). Design and manufacturing of antibacterial electrospun polysulfone membranes functionalized by Ag nanocoating via magnetron sputtering. Nanomaterials, 12.10.3390/nano12223962 ↗
43. Improving the thermal and mechanical properties of polysulfone by incorporation of graphene oxide10.1016/j.compositesb.2013.11.018 ↗
44. Eco-friendly solvents and their mixture for the fabrication of polysulfone ultrafiltration membranes: An investigation of doctor blade and slot die casting methods10.1016/j.memsci.2020.118510 ↗
45. Tuning separation behavior of tailor-made thin film poly(piperazine-amide) composite membranes for pesticides and salts from water10.1016/j.desal.2016.11.021 ↗
46. Mechanical properties and long-term durability of recycled polysulfone plastic10.1016/j.wasman.2018.11.025 ↗
47. Polysulfone hollow porous granules prepared from wastesof ultrafiltration membranes as sustainable adsorbent for water and air remediation10.1002/adsu.201700019 ↗
48. Upcycling of plastic membrane industrial scraps and reuse as sorbent for emerging contaminants in water10.1039/D3EW00900A ↗
49. Evolution of bone transplantation: Molecular, cellular and tissue strategies to engineer human bone10.1016/0142-9612(96)85762-0 ↗
50. Mechanical properties and cytocompatibility of poly(ε-caprolactone)-infiltrated biphasic calcium phosphate scaffolds with bimodal pore distribution10.1016/j.actbio.2010.05.022 ↗
51. Mechanical biocompatibility, osteogenic activity and antibacterial efficacy of calcium silicate-zirconia biocomposites10.1021/acsomega.1c00097 ↗
52. Jeyachandran, P., Bontha, S., Bodhak, S., Balla, V.K., Kundu, B., and Doddamani, M. (2020). Mechanical behaviour of additively manufactured bioactive glass/high density polyethylene composites. J. Mech. Behav. Biomed. Mater., 108.10.1016/j.jmbbm.2020.103830 ↗
53. Laser powder bed fusion of poly-ether-ether-ketone/bioactive glass composites: Processability, mechanical properties, and bioactivity10.1016/j.compscitech.2022.109805 ↗
54. Preparation and characterization of biodegradable chitosan/hydroxyapatite nanocomposite rods via in situ hybridization: A potential material as internal fixation of bone fracture10.1016/S0142-9612(03)00582-9 ↗
55. Costa, M.R., Filho, J.A.C., Luna, C.B.B., Dantas, G.M.P., Costa, A.C.F.d.M., and Oliveira, N.M.d.S. (2024). Toward the Production of Hydroxyapatite/Poly(Ether-Ether-Ketone) (PEEK) Biocomposites: Exploring the Physicochemical, Mechanical, Cytotoxic and Antimicrobial Properties. Polymers, 16.10.3390/polym16172520 ↗
56. Danilova, S.N., Yarusova, S.B., Kulchin, Y.N., Zhevtun, I.G., Buravlev, I.Y., Okhlopkova, A.A., Gordienko, P.S., and Subbotin, E.P. (2021). UHMWPE/CaSiO3 Nanocomposite: Mechanical and Tribological Properties. Polymers, 13.10.3390/polym13040570 ↗
57. Senra, M.R., Vieira Marques, M.F., and Saboya Souza, D.H. (2020). Ultra-high molecular weight polyethylene bioactive composites with carbonated hydroxyapatite. J. Mech. Behav. Biomed. Mater., 110.10.1016/j.jmbbm.2020.103938 ↗
58. Novel bioactive materials with different mechanical properties10.1016/S0142-9612(03)00044-9 ↗
59. Biomedical applications of polymer-composite materials: A review10.1016/S0266-3538(00)00241-4 ↗
60. Effect of the crystallization of bioactive glass reinforcing agents on the mechanical properties of polymer composites10.1016/j.msea.2004.01.011 ↗
61. Effect of long-term in vitro testing on the properties of bioactive glass-polysulfone composites10.1021/bm901228a ↗
62. Synthetic bone graft substitutes10.1046/j.1440-1622.2001.02128.x ↗
63. Ti based biomaterials, the ultimate choice for orthopaedic implants—A review10.1016/j.pmatsci.2008.06.004 ↗
64. The influence of induced micromovement upon the healing of experimental tibiai fractures10.1302/0301-620X.67B4.4030869 ↗
65. Effect of instability on experimental fracture healing10.3109/17453678208992251 ↗
66. Porous polysulfone coated with platelet-derived growth factor-BB stimulates proliferation of human periodontal ligament fibroblasts10.1902/jop.1996.67.10.981 ↗
67. Attachment and metabolic activity of hepatocytes cultivated on selected polymeric membranes10.1177/039139889802100807 ↗
68. Use of a rotary bioartificial liver in the differentiation of human liver stem cells10.1089/ten.tec.2008.0634 ↗
69. Human osteoblast-like MG 63 cells on polysulfone modified with carbon nanotubes or carbon nanohorns10.1016/j.carbon.2013.10.031 ↗
70. The epidemiology of revision total knee arthroplasty in the United States10.1007/s11999-009-0945-0 ↗
71. Periprosthetic joint infection10.1016/S0140-6736(14)61798-0 ↗
72. Kitridis, D., Savvidis, P., Cheva, A., Papalois, A., Givissis, P., and Chalidis, B. (2023). Are absorbable plates more resistant to infection than titanium implants? an experimental pre-clinical trial in rabbits. J. Funct. Biomater., 14.10.3390/jfb14100498 ↗
73. A novel kind of polysulfone material with excellent biocompatibility modified by the sulfonated hydroxypropyl chitosan10.1016/j.msec.2017.05.103 ↗
74. Antibacterial polysulfone membranes: The effect of eugenol and zinc oxide as additives10.4028/www.scientific.net/MSF.867.132 ↗
75. Guanidyl-functionalized graphene/polysulfone mixed matrix ultrafiltration membrane with superior permselective, antifouling and antibacterial properties for water treatment10.1016/j.jcis.2019.01.050 ↗