journal article·2024-07-30Open access

Enhancing the Antimicrobial Properties of Experimental Resin-Based Dental Composites through the Addition of Quaternary Ammonium Salts

Joanna Nowak, Maja Zalega, Witold Jakubowski, Monika Domarecka, Jerzy Sokołowski, Kinga Bociong

Abstract

Secondary caries is one of the main reasons for dental filling replacement. There is a need to obtain dental restorative material that is able to act against caries-inducing microorganisms. This study explores the antimicrobial properties of cetyltrimethylammonium bromide (CTAB) or dimethyldioctadecylammonium bromide (DODAB)-modified photo-cured experimental dental composites against Escherichia coli, Streptococcus mutans, and Candida albicans. The antimicrobial activity against Escherichia coli, Streptococcus mutans, and Candida albicans was assessed by using an Accuri C6 flow cytofluorimeter, and then analyzed using BD CSampler software (1.0.264). Bacterial/yeast surface colonization was carried out by using an GX71 inverted-optics fluorescence microscope equipped with a DP 73 digital camera. For bactericidal surface analysis of each sample type, simultaneous standardization was performed using a positive control (live cells) and a negative control (dead cells). A positive correlation between the increasing concentration of CTAB or DODAB and the dead cell ratio of Escherichia coli, Streptococcus mutans, and Candida albicans was revealed. In particular, CTAB at a 2.0 wt% concentration exhibits superior efficiency against pathogens (65.0% dead cells of Escherichia coli, 73.9% dead cells of Streptococcus mutans, and 23.9% dead cells of Candida albicans after 60 min). However, Candida albicans is more resistant to used salts than bacteria. A CTAB- or DODAB-modified experimental dental composite exhibits antimicrobial potential against Escherichia coli, Streptococcus mutans, and Candida albicans after 10 and 60 min of incubation, and the antimicrobial efficiency increases with the wt% of QAS in the tested material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Antimicrobial agents and applications · Dental Research and COVID-19 · Oral microbiology and periodontitis research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University Laboratory of Materials Research, Medical University of Lodz, ul. Pomorska 251, 92-213 Lodz, Poland

Department of General Dentistry, Medical University of Lodz, ul. Pomorska 251, 92-213 Lodz, Poland

Division of Biophysics, Institute of Materials Science and Engineering, Lodz University of Technology, ul. Stefanowskiego 1/15, 90-924 Lodz, Poland

References (40)

Show source-provided references
1. Restorative Dentistry and Restorative Materials over the next 20 Years: A Delphi Survey10.1016/j.dental.2014.01.013 ↗
2. (2024, March 02). Oral Health. Available online: https://www.who.int/news-room/fact-sheets/detail/oral-health.
3. Developing a New Generation of Antimicrobial and Bioactive Dental Resins10.1177/0022034517709739 ↗
4. The Influence of Quaternary Ammonium Salts on Mechanical Properties of Light-Cured Resin Dental Composites
5. Phillips, R.W., Shen, C., Rawls, H.R., and Anusavice, K.J. (2003). Phillip’s Science of Dental Materials, Elsevier Health Sciences.
6. Qiu, W., Zhou, Y., Li, Z., Huang, T., Xiao, Y., Cheng, L., Peng, X., Zhang, L., and Ren, B. (2020). Application of Antibiotics/Antimicrobial Agents on Dental Caries. Biomed Res. Int., 2020.10.1155/2020/5658212 ↗
7. Anticaries Agent Based on Silver Nanoparticles and Fluoride: Characterization and Biological and Remineralizing Effects—An In Vitro Study10.1155/2022/9483589 ↗
8. Long-Chain Alkanoylcholines, a New Category of Soft Antimicrobial Agents That Are Enzymatically Degradable10.1128/AAC.39.1.50 ↗
9. Antibacterial Quaternary Ammonium Compounds in Dental Materials: A Systematic Review10.1016/j.dental.2018.03.014 ↗
10. hua Quaternary Ammonium-Based Biomedical Materials: State-of-the-Art, Toxicological Aspects and Antimicrobial Resistance10.1016/j.progpolymsci.2017.03.001 ↗
11. Alkattan, R., Rojo, L., and Deb, S. (2021). Antimicrobials in Dentistry. Appl. Sci., 11.10.3390/app11073279 ↗
12. Smart Dental Materials for Antimicrobial Applications
13. Synthesis and Evaluation of a Novel Antibacterial Dental Resin Composite with Quaternary Ammonium Salts10.4236/jbise.2011.43021 ↗
14. Chrószcz, M., and Barszczewska-Rybarek, I. (2020). Synthesis of Novel Urethane-Dimethacrylate Monomer Containing Two Quaternary Ammonium Groups for Applications in Dentistry. Proceedings, 67.10.3390/ASEC2020-07548 ↗
15. Investigation of Double Bond Conversion, Mechanical Properties, and Antibacterial Activity of Dental Resins with Different Alkyl Chain Length Quaternary Ammonium Methacrylate Monomers (QAM)10.1080/09205063.2012.699709 ↗
16. Effect of Antibacterial Dental Adhesive on Multispecies Biofilms Formation10.1177/0022034515571416 ↗
17. Antibacterial Activity and Bonding Ability of an Adhesive Incorporating an Antibacterial Monomer DMAE-CB10.1002/jbm.b.31350 ↗
18. Antibacterial Activity of a Modified Unfilled Resin Containing a Novel Polymerizable Quaternary Ammonium Salt MAE-HB10.1038/srep33858 ↗
19. Development, Characterization and Antimicrobial Activity of Multilayer Silica Nanoparticles with Chlorhexidine Incorporated into Dental Composites10.1016/j.dental.2023.03.005 ↗
20. In Vitro Antiseptic Properties of an Ammonium Compound Combined with Denture Base Acrylic Resin10.1111/j.1741-2358.2006.00088.x ↗
21. Synthesis and Characterization of Dimethacrylates Containing Quaternary Ammonium Functionalities for Dental Applications10.1016/j.dental.2011.10.004 ↗
22. The Effect of Quaternary Ammonium Polyethylenimine Nanoparticles on Bacterial Adherence, Cytotoxicity, and Physical and Mechanical Properties of Experimental Dental Composites10.1038/s41598-023-43851-y ↗
23. Barszczewska-Rybarek, I.M., Chrószcz, M.W., and Chladek, G. (2021). Physicochemical and Mechanical Properties of Bis-Gma/Tegdma Dental Composite Resins Enriched with Quaternary Ammonium Polyethylenimine Nanoparticles. Materials, 14.10.3390/ma14082037 ↗
24. Cationic Antiseptics: Diversity of Action under a Common Epithet10.1111/j.1365-2672.2005.02664.x ↗
25. Cationic Lipids and Surfactants as Antifungal Agents: Mode of Action10.1093/jac/dkl312 ↗
26. Antimicrobial Activity of Betaine Esters, Quaternary Ammonium Amphiphiles Which Spontaneously Hydrolyze into Nontoxic Components10.1128/AAC.34.10.1949 ↗
27. In Vitro and in Vivo Antimicrobial Activity of Covalently Coupled Quaternary Ammonium Silane Coatings on Silicone Rubber10.1016/S0142-9612(01)00263-0 ↗
28. Abduraimova, A., Molkenova, A., Duisembekova, A., Mulikova, T., Kanayeva, D., and Atabaev, T.S. (2021). Cetyltrimethylammonium Bromide (CTAB)-Loaded SiO2–Ag Mesoporous Nanocomposite as an Efficient Antibacterial Agent. Nanomaterials, 11.10.3390/nano11020477 ↗
29. Antimicrobial Cationic Surfactant, Cetyltrimethylammonium Bromide, Induces Superoxide Stress in Escherichia Coli Cells10.1111/j.1365-2672.2010.04912.x ↗
30. Antibacterial Activity of CTAB-Modified Zeolite NaY with Different CTAB Loading
31. Structural Characterization of Cationic DODAB Bilayers Containing C24:1 β-Glucosylceramide10.1016/j.bbamem.2018.12.018 ↗
32. Dioctadecyldimethylammonium Bromide, a Surfactant Model for the Cell Membrane: Importance of Microscopic Dynamics10.1063/4.0000030 ↗
33. Dental Composites Based on Dimethacrylate Resins Reinforced by Nanoparticulate Silica
34. Olczak, K., Jakubowski, W., and Szymański, W. (2023). Bactericidal Activity of Graphene Oxide Tests for Selected Microorganisms. Materials, 16.10.3390/ma16114199 ↗
35. Resistance of Oxidative Stress in Biofilm and Planktonic Cells10.1590/S1516-8913201500356 ↗
36. Cationic Liposomes as Antimicrobial Agents
37. Antibacterial Activity of Surfactants against Escherichia Coli Cells Is Influenced by Carbon Source and Anaerobiosis10.1046/j.1365-2672.2002.01690.x ↗
38. Ribeiro, R.T., Galvão, C.N., Betancourt, Y.P., Mathiazzi, B.I., and Carmona-Ribeiro, A.M. (2019). Microbicidal Dispersions and Coatings from Hybrid Nanoparticles of Poly (Methyl Methacrylate), Poly (Diallyl Dimethyl Ammonium) Chloride, Lipids, and Surfactants. Int. J. Mol. Sci., 20.10.3390/ijms20246150 ↗
39. Antimicrobial Activity of Quaternary Ammonium Salts: Structure-Activity Relationship10.1007/s00044-022-02924-9 ↗
40. StructureÀActivity Relationship for Quaternary Ammonium Compounds Hybridized with Poly(Methyl Methacrylate)10.1021/am200150t ↗