journal article·2023-12-28Open access

Effect of Ceramic Thickness and Technician Variability on the Shade Duplication of Dental Ceramo-Metallic Restorations

Rasha M. Abdelraouf, Taheya A. Moussa, Tamer M. Hamdy, Reem A. Abuhaimed, Alanoud M. Alotaibi, Carlos A. Jurado, Abdulaziz Alhotan, Bushra Alhelal, Nour A. Habib

Abstract

Ceramic thickness and technicians’ manipulative variables are critical factors affecting the resultant shade of dental ceramo-metallic restorations. This study investigated the effect of the following variables on shade duplication of ceramo-metallic specimens: (a) ceramic thickness; (b) differences between several technicians (inter-technician variability); and (c) the ability of each technician to repeat the resultant shade (intra-technician variability). Ninety ceramo-metallic specimens were prepared and divided into three main groups (n = 30/gp) according to the different technicians who built up the veneering ceramic of the specimens. Each group was further subdivided into three subgroups (n = 10/subgroup) according to the thickness of the ceramic (1, 1.5, and 2 mm built over a 0.5 mm-thick metal substructure). Three different technicians were asked to follow the same protocol as regards the same ceramic batch (Shade 3M2, Vita VM13, Zahnfabrik, Germany), firing temperature, and number of firing cycles. Meanwhile, each technician followed his own protocol with regard to other ceramic manipulative variables. The duplicated shades of the specimens were investigated using the Vita Easyshade spectrophotometer by using the verify shade mode. Color difference (∆E) values were calculated between the target shade (3M2) and the duplicated shades of the specimens automatically by the Vita Easyshade spectrophotometer (Vita, Zahnfabrik, Germany). The effect of ceramic thickness and inter- and intra-technician variability on the duplication of the target shade was investigated. The results showed that the effect of ceramic thickness on the duplicated shades depended on inter-technician variability. High inter-technician variability (∆E = 2–6.4) was noticed in contrast to low intra-technician variability (∆E = 0.2–1.5). It could be concluded that proper shade-duplication of ceramo-metallic restoration was a cumulative technique intimately related to manipulative variables and ceramic thickness.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Erosion and Treatment · Orthodontics and Dentofacial Orthopedics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Biomaterials Department, Faculty of Dentistry, Cairo University, Cairo 11553, Egypt

Restorative and Dental Materials Department, Oral and Dental Research Institute, National Research Centre (NRC), El Bohouth St., Dokki, Giza 12622, Egypt

Dental Interns, College of Dentistry, King Saud University, P.O. Box 60169, Riyadh 11545, Saudi Arabia

Department of Prosthodontics, University of Iowa College of Dentistry and Dental Clinics, Iowa City, IA 52242, USA

Department of Dental Health, College of Applied Medical Sciences, King Saud University, P.O. Box 10219, Riyadh 12372, Saudi Arabia

Funding

Researchers Supporting Project

References (29)

Show source-provided references
1. Capability of Rice Husk Silica on Flexural Improvement in Metal Ceramic Restoration
2. All-Ceramic Restorations: A Review of the Literature10.1016/j.sdentj.2020.05.004 ↗
3. Effects of Substrate, Ceramic Thickness, Translucency, and Cement Shade on the Color of CAD/CAM Lithium-disilicate Crowns10.1111/jerd.12470 ↗
4. Abdelraouf, R.M., Tsujimoto, A., Hamdy, T.M., Alhotan, A., Jurado, C.A., Abadir, M., and Habib, N.A. (2023). The Effect of Surface Treatments of Presintered Zirconia on Sintered Surfaces. J. Compos. Sci., 7.10.3390/jcs7090396 ↗
5. Gomes, C., Martins, F., Reis, J.A., Maurício, P.D., and Ramírez-Fernández, M.P. (2023). Color Assessment of Feldspathic Ceramic with Two Different Thicknesses, Using Multiple Polymeric Cements. Polymers, 15.10.3390/polym15020397 ↗
6. Investigation of Color Change of Different Restoration Thickness, Background Color and Resin Cement Shade on CAD/CAM Glass Ceramic Materials10.4236/ojst.2023.134012 ↗
7. The Clinical Performance of Porcelain-Fused-to-Metal Precious Alloy Single Crowns: Chipping, Recurrent Caries, Periodontitis, and Loss of Retention10.11607/ijp.3440 ↗
8. The Influence of Some Different Factors on the Accuracy of Shade Selection10.1111/j.1365-2842.2004.01310.x ↗
9. Hamdy, T.M., Abdelnabi, A., Othman, M.S., Bayoumi, R.E., and Abdelraouf, R.M. (2023). Effect of Different Mouthwashes on the Surface Microhardness and Color Stability of Dental Nanohybrid Resin Composite. Polymers, 15.10.3390/polym15040815 ↗
10. An In-Vitro Study on the Influence of Ceramic Thickness in the Color of Titanium Ceramic Restoration
11. A Review of Color Matching in Dentistry10.37990/medr.818367 ↗
12. Acceptability of Shade Differences in Metal Ceramic Crowns10.1016/S0022-3913(98)70233-1 ↗
13. Aljamhan, A.S., Habib, S.R., Khan, A.S., Javed, M.Q., Bhatti, U.A., and Zafar, M.S. (2022). Color Analysis of Metal Ceramic Restorations Fabricated from Different Dental Laboratories. Coatings, 12.10.3390/coatings12030297 ↗
14. Color Difference Thresholds in Dentistry10.1111/jerd.12149 ↗
15. Tribological Behavior of Dental Resin Composites: A Comprehensive Review10.1016/j.triboint.2023.109017 ↗
16. Dentist Material Selection for Single-Unit Crowns: Findings from the National Dental Practice-Based Research Network10.1016/j.jdent.2016.09.010 ↗
17. Shade Selection—Basic for Esthetic Dentistry: Literature Review10.15520/ijcrr.v11i09.849 ↗
18. Alhotan, A., Abdelraouf, R.M., Alhijji, S., De Vera, M.A.T., Sufyan, A., Matinlinna, J.P., and Hamdy, T.M. (2023). Colour Parameters and Changes of Tea-Stained Resin Composite Exposed to Whitening Pen (In Vitro Study). Polymers, 15.10.3390/polym15143068 ↗
19. Abdelraouf, R.M., and Habib, N.A. (2016). Color-Matching and Blending-Effect of Universal Shade Bulk-Fill-Resin-Composite in Resin-Composite-Models and Natural Teeth. Biomed. Res. Int., 2016.10.1155/2016/4183432 ↗
20. Alshehri, H.A., Altaweel, S.M., Alshaibani, R., Alahmari, E.A., Alotaibi, H.N., Alfouzan, A.F., and Labban, N. (2022). Effect of Different Wax Pattern Manufacturing Techniques on the Marginal Fit of Lithium Disilicate Crowns. Materials, 15.10.3390/ma15144774 ↗
21. Assessment of Internal Fit and Micro Leakage of Conventionally Fabricated Ceramometallic Restoration versus CAD Wax and Press Veneering (In-Vitro Study)10.1038/s41405-021-00072-7 ↗
22. El-Rashidy, A.A., Abdelraouf, R.M., and Habib, N.A. (2022). Effect of Two Artificial Aging Protocols on Color and Gloss of Single-Shade versus Multi-Shade Resin Composites. BMC Oral Health, 22.10.1186/s12903-022-02351-7 ↗
23. Hardan, L., Bourgi, R., Cuevas-Suárez, C.E., Lukomska-Szymanska, M., Monjarás-Ávila, A.J., Zarow, M., Jakubowicz, N., Jorquera, G., Ashi, T., and Mancino, D. (2022). Novel Trends in Dental Color Match Using Different Shade Selection Methods: A Systematic Review and Meta-Analysis. Materials, 15.10.3390/ma15020468 ↗
24. Color Difference for Shade Determination with Visual and Instrumental Methods: A Systematic Review and Meta-Analysis10.1186/s13643-023-02263-9 ↗
25. Alshihri, A., Husain, N.A.H., Vogeler, K., and Özcan, M. (2021). An Assessment of the Influence of Dental Porcelain Slurry Preparation on Flexural Strength of Different Feldspathic Porcelains. Appl. Sci., 11.10.3390/app11209385 ↗
26. Influence of Powder/liquid Mixing Ratio on Porosity and Translucency of Dental Porcelains10.1016/j.prosdent.2003.10.014 ↗
27. de Matos, J.D.M., Lopes, G.R.S., Queiroz, D.A., Nakano, L.J.N., Ribeiro, N.C.R., Barbosa, A.B., Anami, L.C., and Bottino, M.A. (2022). Dental Ceramics: Fabrication Methods and Aesthetic Characterization. Coatings, 12.10.3390/coatings12081228 ↗
28. Translucency of a Dental Porcelain Mixed by Two Ceramic Slurry Methods: A Bayesian Comparison
29. Sarna-Boś, K., Skic, K., Sobieszczański, J., Boguta, P., and Chałas, R. (2021). Contemporary Approach to the Porosity of Dental Materials and Methods of Its Measurement. Int. J. Mol. Sci., 22.10.3390/ijms22168903 ↗