journal article·2024-08-10Open access

Fibronectin Functionalization: A Way to Enhance Dynamic Cell Culture on Alginate/Hydroxyapatite Scaffolds

Bianca Zumbo, Benedetta Guagnini, Barbara Medagli, Davide Porrelli, Gianluca Turco

Abstract

Bone defects are a global health concern; bone tissue engineering (BTE) is the most promising alternative to reduce patient morbidity and overcome the inherent drawbacks of autograft and allograft bone. Three-dimensional scaffolds are pivotal in this field due to their potential to provide structural support and mimic the natural bone microenvironment. Following an already published protocol, a 3D porous structure consisting of alginate and hydroxyapatite was prepared after a gelation step and a freezing-drying step. Despite the frequent use of alginate in tissue regeneration, the biological inertness of this polysaccharide hampers proper cell colonization and proliferation. Therefore, the purpose of this work was to enhance the biological properties by promoting the interaction and adhesion between cells and biomaterial with the use of Fibronectin. This extracellular matrix protein was physically adsorbed on the scaffold, and its presence was evaluated with environmental scanning electron microscopy (eSEM) and the Micro-Bicinchoninic Acid (μBCA) protein assay. The MG-63 cell line was used for both static and dynamic (i.e., in bioreactor) 3D cell culturing on the scaffolds. The use of the bioreactor allowed for a better exchange of nutrients and oxygen and a better removal of cell catabolites from the inner portion of the construct, mimicking the physiological environment. The functionalized scaffolds showed an improvement in cell proliferation and colonization compared to non-functionalized ones; the effect of the addition of Fibronectin was more evident in the dynamic culturing conditions, where the cells clearly adhered on the surface of functionalized scaffolds.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Periodontal Regeneration and Treatments · 3D Printing in Biomedical Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Medicine, Surgery and Health Sciences, University of Trieste, Piazza dell’Ospitale 1, 34129 Trieste, Italy

Department of Life Sciences, University of Trieste, Via Alexander Fleming 31/B, 34127 Trieste, Italy

References (38)

Show source-provided references
1. Zarei, M., Shabani Dargah, M., Hasanzadeh Azar, M., Alizadeh, R., Mahdavi, F.S., Sayedain, S.S., Kaviani, A., Asadollahi, M., Azami, M., and Beheshtizadeh, N. (2023). Enhanced Bone Tissue Regeneration Using a 3D-Printed Poly(Lactic Acid)/Ti6Al4V Composite Scaffold with Plasma Treatment Modification. Sci. Rep., 13.10.1038/s41598-023-30300-z ↗
2. Dimitriou, R., Jones, E., McGonagle, D., and Giannoudis, P.V. (2011). Bone Regeneration: Current Concepts and Future Directions. BMC Med., 9.10.1186/1741-7015-9-66 ↗
3. Self-Healing Hydrogels for Bone Defect Repair10.1039/D3RA01700A ↗
4. Recent Approaches towards Bone Tissue Engineering10.1016/j.bone.2021.116256 ↗
5. Alginate and Its Application to Tissue Engineering10.1007/s42452-020-04096-w ↗
6. Biomaterial-Based 3D Bioprinting Strategy for Orthopedic Tissue Engineering10.1016/j.actbio.2022.08.004 ↗
7. Alginate Composites for Bone Tissue Engineering: A Review10.1016/j.ijbiomac.2014.07.008 ↗
8. Bio-Scaffold for Bone Tissue Engineering with Focus on Bacterial Cellulose, Biological Materials for Hydroxyapatite Synthesis and Growth Factors10.1016/j.eurpolymj.2023.112168 ↗
9. Nayak, A.K., and Hasnain, M.S. (2020). Alginate-Based Scaffolds for Drug Delivery in Tissue Engineering. Alginates in Drug Delivery, Academic Press.10.1016/B978-0-12-817640-5.00014-5 ↗
10. Injectable Alginate/Hydroxyapatite Gel Scaffold Combined with Gelatin Microspheres for Drug Delivery and Bone Tissue Engineering10.1016/j.msec.2016.02.071 ↗
11. Alginate Hydrogels for Bone Tissue Engineering, from Injectables to Bioprinting: A Review10.1016/j.carbpol.2019.115514 ↗
12. Bioactive Scaffold (Sodium Alginate)-g-(nHAp@SiO2@GO) for Bone Tissue Engineering10.1016/j.ijbiomac.2022.09.153 ↗
13. Turco, G., Porrelli, D., Marsich, E., Vecchies, F., Lombardi, T., Stacchi, C., and Di Lenarda, R. (2018). Three-Dimensional Bone Substitutes for Oral and Maxillofacial Surgery: Biological and Structural Characterization. J. Funct. Biomater., 9.10.3390/jfb9040062 ↗
14. Nano-Composite Scaffolds for Bone Tissue Engineering Containing Silver Nanoparticles: Preparation, Characterization and Biological Properties10.1007/s10856-013-4923-4 ↗
15. Alginate-Hydroxyapatite Bone Scaffolds with Isotropic or Anisotropic Pore Structure: Material Properties and Biological Behavior10.1002/mame.201500055 ↗
16. Alginate/Hydroxyapatite Biocomposite for Bone Ingrowth: A Trabecular Structure with High and Isotropic Connectivity10.1021/bm900154b ↗
17. Trujillo, S., Seow, M., Lueckgen, A., Salmeron-Sanchez, M., and Cipitria, A. (2021). Dynamic Mechanical Control of Alginate-Fibronectin Hydrogels with Dual Crosslinking: Covalent and Ionic. Polymers, 13.10.3390/polym13030433 ↗
18. The Effect of Immobilized RGD Peptide in Alginate Scaffolds on Cardiac Tissue Engineering10.1016/j.actbio.2010.07.034 ↗
19. Alginate-Based Biomaterials for Regenerative Medicine Applications10.3390/ma6041285 ↗
20. Dalton, C.J., and Lemmon, C.A. (2021). Fibronectin: Molecular Structure, Fibrillar Structure and Mechanochemical Signaling. Cells, 10.10.20944/preprints202108.0010.v1 ↗
21. Functionalization of Chitosan-TiO2 Nanotubes Scaffolds with Fibronectin for Bone Regeneration
22. A Glance on the Role of Fibronectin in Controlling Cell Response at Biomaterial Interface10.1016/j.jdsr.2019.11.002 ↗
23. Mechanistic Insights into the Adsorption and Bioactivity of Fibronectin on Surfaces with Varying Chemistries by a Combination of Experimental Strategies and Molecular Simulations
24. Cytocompatibility and Bioactivity of Calcium Hydroxide-Containing Nanofiber Scaffolds Loaded with Fibronectin for Dentin Tissue Engineering10.1007/s00784-022-04372-6 ↗
25. Liverani, L., Killian, M.S., and Boccaccini, A.R. (2019). Fibronectin Functionalized Electrospun Fibers by Using Benign Solvents: Best Way to Achieve Effective Functionalization. Front. Bioeng. Biotechnol., 7.10.3389/fbioe.2019.00068 ↗
26. Palomino-Durand, C., Pauthe, E., and Gand, A. (2021). Fibronectin-Enriched Biomaterials, Biofunctionalization, and Proactivity: A Review. Appl. Sci., 11.10.3390/app112412111 ↗
27. Osteogenic Differentiation of Adipose Tissue-Derived Mesenchymal Stem Cells on Fibrin Glue- or Fibronectin-Coated Ceraform®10.1177/0885328219853421 ↗
28. Bone Tissue Engineering Bioreactors: Dynamic Culture and the Influence of Shear Stress10.1016/j.bone.2010.09.138 ↗
29. Birru, B., Mekala, N.K., and Parcha, S.R. (2019). Mechanistic Role of Perfusion Culture on Bone Regeneration. J. Biosci., 44.10.1007/s12038-018-9827-5 ↗
30. Marijanovic, I., Antunovic, M., Matic, I., Panek, M., and Ivkovic, A. (2016). Bioreactor-Based Bone Tissue Engineering. Advanced Techniques in Bone Regeneration, IntechOpen.10.5772/62546 ↗
31. Cacciamali, A., Villa, R., and Dotti, S. (2022). 3D Cell Cultures: Evolution of an Ancient Tool for New Applications. Front. Physiol., 13.10.3389/fphys.2022.836480 ↗
32. Recent Advances of Natural Biopolymeric Culture Scaffold: Synthesis and Modification10.1080/21655979.2021.2024322 ↗
33. The Role of Perfusion Bioreactors in Bone Tissue Engineering10.4161/biom.22170 ↗
34. Atala, A., Lanza, R., Mikos, A.G., and Nerem, R. (2019). Bioreactors in Regenerative Medicine. Principles of Regenerative Medicine, Academic Press. [3rd ed.].
35. Contact Angle Measurement of Natural Materials10.1016/j.colsurfb.2017.10.056 ↗
36. Alginate/Hydroxyapatite-Based Nanocomposite Scaffolds for Bone Tissue Engineering Improve Dental Pulp Biomineralization and Differentiation10.1155/2018/9643721 ↗
37. Phenotypic Stability of the Human MG-63 Osteoblastic Cell Line at Different Passages10.1002/cbin.11073 ↗
38. A Resazurin-Based, Nondestructive Assay for Monitoring Cell Proliferation during a Scaffold-Based 3D Culture Process10.1093/rb/rbaa002 ↗