Hybrid Coatings Based on Polyvinylpyrrolidone/Polyethylene Glycol Enriched with Collagen and Hydroxyapatite: Incubation Studies and Evaluation of Mechanical and Physiochemical Properties
Source abstract
Abstract
Coating materials offers an intriguing solution for imparting inert implants with additional bioactive characteristics without changing underlying parameters such as mechanical strength. Metallic implants like endoprostheses or polymeric implants can be coated with a thin layer of bioactive film capable of stimulating bone-forming cells to proliferate or release a drug. However, irrespective of the final implantation site of such a coating biomaterial, it is necessary to conduct detailed mechanical and physicochemical in vitro analyses to determine its likely behavior under biological conditions. In this study, polymeric and composite coatings with hydroxyapatite obtained under UV light underwent incubation tests in four different artificial biological fluids: simulated body fluid (SBF), artificial saliva, Ringer’s fluid, and water (as the reference fluid). The potentiometric and conductometric properties, sorption capacity, and degradation rate of the coatings were examined. Furthermore, their hardness, modulus of elasticity, and deformation were determined. It was demonstrated that the coatings remained stable in SBF liquid at a pH value of around 7.4. In artificial saliva, the greatest degradation of the polymer matrix (ranging between 36.19% and 39.79%) and chipping of hydroxyapatite in the composite coatings were observed. Additionally, the effect of ceramics on sorption capacity was determined, with lower capacity noted with higher HA additions. Moreover, the evaluation of surface morphology supported by elemental microanalysis confirmed the appearance of new apatite layers on the surface as a result of incubation in SBF. Ceramics also influenced mechanical aspects, increasing hardness and modulus of elasticity. For the polymer coatings, the value was 11.48 ± 0.61, while for the composite coating with 15% ceramics, it increased more than eightfold to a value of 93.31 ± 11.18 N/mm2. Based on the conducted studies, the effect of ceramics on the physicochemical as well as mechanical properties of the materials was determined, and their behavior in various biological fluids was evaluated. However, further studies, especially cytotoxicity analyses, are required to determine the potential use of the coatings as biomaterials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surgical Sutures and Adhesives · Bone Tissue Engineering Materials · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science, Faculty of Materials Engineering and Physics, Cracow University of Technology, 37 Jana Pawła II Av., 31-864 Krakow, Poland
Department of Analytical Chemistry, Faculty of Natural Sciences, Comenius University, Ilkovicova 6, 842 15 Bratislava, Slovakia
Department of Chemical Biology, Faculty of Science, Palacky University, Slechtitelu 27, 783 71 Olomouc, Czech Republic
Funding
Foundation for Polish Science · European Union
References (47)
Show source-provided references
1. Characterization of multilayer anti-fog coatings10.1021/am1010964 ↗
2. Peri-implant osteogenesis in health and osteoporosis10.1016/j.micron.2005.07.008 ↗
3. Wen, C. (2015). Surface Coating and Modification of Metallic Biomaterials, Elsevier.
4. Process of bonelike apatite formation on sintered hydroxyapatite in serum-containing SBF
5. Batchelor, A.W., and Chandrasekaran, M. (2004). Service Characteristics of Biomedical Materials and Implants, Imperial College Press.10.1142/p343 ↗
6. Bioactive coating as a surface modification technique for biocompatible metallic implants: A review10.1080/21870764.2019.1669861 ↗
7. A review of techniques for the application of bioactive coatings on metal-based implants to achieve controlled release of active ingredients10.1016/j.matdes.2022.110653 ↗
8. Medical applications of collagen and collagen-based materials10.2174/0929867325666171205170339 ↗
9. Collagen-based biomaterials for biomedical applications10.1002/jbm.b.34881 ↗
10. Pattern of ear, nose, and throat disease seen by otolaryngologists at Qassim University outpatient clinics, Saudi Arabia
11. Spectroscopic studies into the influence of UV radiation on elastin hydrolysates in water solution10.1016/j.jphotobiol.2006.05.005 ↗
12. Collagen- and hyaluronic acid-based hydrogels and their biomedical applications10.1016/j.mser.2021.100641 ↗
13. He, Y., Wang, C., Wang, C., Xiao, Y., and Lin, W. (2021). An overview on collagen and gelatin-based cryogels: Fabrication, classification, properties and biomedical applications. Polymers, 13.10.3390/polym13142299 ↗
14. Ahmad, M.I., Li, Y., Pan, J., Liu, F., Dai, H., Fu, Y., Huang, T., Farooq, S., and Zhang, H. (2024). Collagen and gelatin: Structure, properties, and applications in food industry. Int. J. Biol. Macromol., 254.10.1016/j.ijbiomac.2023.128037 ↗
15. Skin, bone and muscle collagen extraction from the trash fish, leather jacket (Odonus niger) and their characterization10.1007/s13197-011-0440-y ↗
16. Investigation of viscosity and gelation properties of different mammalian and fish gelatins10.1016/S0268-005X(09)80047-7 ↗
17. Parcheta, M., Świsłocka, R., Orzechowska, S., Akimowicz, M., Choińska, R., and Lewandowski, W. (2021). Recent developments in effective antioxidants: The structure and antioxidant properties. Materials, 14.10.3390/ma14081984 ↗
18. Age-dependent changes in glutathione metabolism pathways in the lens: New insights into therapeutic strategies to prevent cataract formation—A review10.1111/ceo.13801 ↗
19. Mapping of quantitative trait loci for antioxidant molecules in tomato fruit: Carotenoids, vitamins C and E, glutathione and phenolic acids10.1016/j.plantsci.2019.110393 ↗
20. Aoyama, K. (2021). Glutathione in the brain. Int. J. Mol. Sci., 22.10.3390/ijms22095010 ↗
21. Bone regeneration with hydroxyapatite-based biomaterials10.1007/s42247-019-00063-3 ↗
22. Shi, H., Zhou, Z., Li, W., Fan, Y., Li, Z., and Wei, J. (2021). Hydroxyapatite based materials for bone tissue engineering: A brief and comprehensive introduction. Crystals, 11.10.3390/cryst11020149 ↗
23. Corrosion of experimental magnesium alloys in blood and PBS: A gravimetric and microscopic evaluation10.1016/j.mseb.2011.04.007 ↗
24. Tribological performance of SS 316L, commercially pure titanium, and Ti6Al4V in different solutions for biomedical applications10.1016/j.matpr.2023.03.736 ↗
25. Vladescu, A., Pârâu, A., Pana, I., Cotrut, C.M., Constantin, L.R., Braic, V., and Vrânceanu, D.M. (2019). In vitro activity assays of sputtered HAp coatings with SiC addition in various simulated biological fluids. Coatings, 9.10.3390/coatings9060389 ↗
26. The interfacial pH of acidic degradable polymeric biomaterials and its effects on osteoblast behavior10.1038/s41598-017-06354-1 ↗
27. Analytical and simulation-based models for drug release and gel-degradation in a tetra-PEG hydrogel drug-delivery system10.1021/acs.macromol.5b01598 ↗
28. A thermo-degradable hydrogel with light-tunable degradation and drug release10.1016/j.biomaterials.2016.10.015 ↗
29. Bordbar-Khiabani, A., and Gasik, M. (2022). Smart hydrogels for advanced drug delivery systems. Int. J. Mol. Sci., 23.10.3390/ijms23073665 ↗
30. Tomala, A.M., Słota, D., Florkiewicz, W., Piętak, K., Dyląg, M., and Sobczak-Kupiec, A. (2022). Tribological properties and physiochemical analysis of polymer-ceramic composite coatings for bone regeneration. Lubricants, 10.10.3390/lubricants10040058 ↗
31. Słota, D., Piętak, K., Florkiewicz, W., Jampílek, J., Tomala, A., Urbaniak, M.M., Tomaszewska, A., Rudnicka, K., and Sobczak-Kupiec, A. (2023). Clindamycin-loaded nanosized calcium phosphates powders as a carrier of active substances. Nanomaterials, 13.10.3390/nano13091469 ↗
32. Measurement methods for the mechanical testing and biocompatibility assessment of polymer-ceramic connective tissue replacements10.1016/j.measurement.2020.108733 ↗
33. The influence of polyurethane component on the properties of polyurethane-rubber composites obtained from waste materials10.1080/15421406.2014.966236 ↗
34. (2005). Tworzywa sztuczne i ebonite. Oznaczanie twardości metodą wciskania z zastosowaniem twardościomierza (twardość metodą Shore’A) (Standard No. PN-ISO 868).
35. (2015). Guma. Oznaczanie twardości przez wgniecenie przy użyciu kieszonkowych twardościomierzy (Standard No. PN-93/C-04206).
36. (2020). Tworzywa sztuczne. Oznaczanie właściwości mechanicznych przy statycznym rozciąganiu (Standard No. PN-EN ISO 527-1).
37. Red-blood-cell waveguide as a living biosensor and micromotor10.1002/adfm.201905568 ↗
38. Structure and dynamics of collagen hydration water from molecular dynamics simulations: Implications of temperature and pressure10.1021/acs.jpcb.9b03078 ↗
39. Slota, D., Gląb, M., Tyliszczak, B., Dogulas, T.E.L., Rudnicka, K., Miernik, K., Urbaniak, M.M., Rusek-Wala, P., and Sobczak-upiec, A. (2021). Composites based on hydroxyapatite and whey protein isolate for applications in bone regeneration. Materials, 14.10.3390/ma14092317 ↗
40. Mineral-induced bubbling effect and biomineralization as strategies to create highly porous and bioactive scaffolds for dentin tissue engineering
41. Behavior of hydroxyapatite crystals in a simulated body fluid: Effects of crystal face10.2109/jcersj2.121.807 ↗
42. Saba, N., Jawaid, M., and Sultan, M.T.H. (2018). An Overview of Mechanical and Physical Testing of Composite Materials, Elsevier Ltd.10.1016/B978-0-08-102292-4.00001-1 ↗
43. Highly extensible, tough, and elastomeric nanocomposite hydrogels from poly(ethylene glycol) and hydroxyapatite nanoparticles10.1021/bm200027z ↗
44. Hydroxyapatite for bone related applications derived from sea shell waste by simple precipitation method10.1080/21870764.2020.1749373 ↗
45. Comparative study between natural and synthetic hydroxyapatite: Structural, morphological and bioactivity properties
46. Jalageri, M.B., and Mohan Kumar, G.C. (2022). Hydroxyapatite reinforced polyvinyl alcohol/polyvinyl pyrrolidone based hydrogel for cartilage replacement. Gels, 8.10.3390/gels8090555 ↗
47. Biological responses to physicochemical properties of biomaterial surface10.1039/D0CS00103A ↗