journal article·2025-01-09Open access

Non-Linear Biomechanical Evaluation and Comparison in the Assessment of Three Different Piece Dental Implant Systems for the Molar Region: A Finite Element Study

Jesus Alejandro Serrato-Pedrosa, Ignacio Villanueva-Fierro, Rodrigo Arturo Marquet-Rivera, Rosa Alicia Hernández-Vázquez, Salvador Cruz-Lopez, Verónica Loera-Castañeda

Abstract

The widely available options of different manufacturers in dental implant systems have complicated the selection criteria process for periodontists, necessitating careful consideration of various factors when selecting suitable solutions for individual patient needs. Optimal implant selection requires careful consideration of the patient-specific factors, implant design, and surgical technique. Understanding the biomechanical behavior of implant–tissue interactions is crucial for achieving successful and long-lasting implant therapy. To adequately address this issue and improve the rigorous selection criteria from a biomechanically numerical approach, this research aims to analyze the stress distribution fields, strain patterns, and load transfer displacements within the implant system and the implant–biological interface (gingival and bony tissues) of titanium three-piece to two–one-piece ceramic implant systems. Thus, three different commercially available dental implants designed to be placed in the jaw molar region were considered for evaluation through the finite element method under both oblique and occlusal loading conditions. The results have exhibited an increasing trend to highlight the outstanding behavior of two-piece ceramic implants to dissipate the stress distribution better (6 and 2 times lower than the three- and one-piece systems under occlusal loads and almost 5 and 1.3 times more efficient for oblique loading, respectively), minimize peak stress values (below 100 MPa), and reduce strain peak patterns compared with the other two evaluated designs. On the other hand, the effects generated in biological tissues are strongly associated with implant geometry features. This biomechanical approach could provide a promising strategy for predicting micro-strains and micromotion in implant system pieces and geometries. Hence, these findings contribute to a deeper understanding of the biomechanics spectrum in the behavior of dental implant systems and emphasize the importance of carefully selecting appropriate material systems for accurate patient-specific biomechanical performance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental Implant Techniques and Outcomes · Dental materials and restorations · Endodontics and Root Canal Treatments

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

CIIDIR-Durango, Instituto Politécnico Nacional, Calle Sigma 119, Fraccionamiento 20 de Noviembre II, Durango C.P. 34220, Mexico

Escuela Superior de Ingeniería Mecánica y Eléctrica Unidad Culhuacán, Instituto Politécnico Nacional, Av. Sta. Ana 1000, San Francisco Culhuacán, Colonia Culhuacán CTM V, Alcaldía Coyoacán, Ciudad de México C.P. 04440, Mexico

Escuela Superior de Comercio y Administración Unidad Tepepan, Instituto Politécnico Nacional, Anillo Periférico Sur Manuel Gómez Morín 4863, Colonia Ampliación Tepepan, Alcaldía Coyoacán, Ciudad de México C.P. 16020, Mexico

División de Mecatrónica, Universidad Politécnica del Valle de México, Av. Mexiquense s/n esquina Av. Universidad Politécnica, Col. Villa Esmeralda, Tultitlán C.P. 54910, Estado de México, Mexico

MARMAS Soluciones en Ingeniería e Investigación, Matagalpa 1021A, Residencial Zacatenco, Gustavo A. Madero, Ciudad de México C.P. 07369, Mexico

Funding

Instituto Politécnico Nacional

References (68)

Show source-provided references
1. One-piece implants: Careful approach for complex rehabilitation10.4103/njms.NJMS_191_20 ↗
2. A clinical and radiographic evaluation of zirconia dental implants: 10-year follow-up10.1155/2021/7534607 ↗
3. Biological width around one- and two-piece implants: A systematic review10.4103/jhnps.jhnps_45_24 ↗
4. Micromotion analysis of immediately loaded implants with titanium and cobalt-chrome superstructures. 3D finite element analysis10.1002/cre2.365 ↗
5. Dental implants: A review of types, design analysis, materials, additive manufacturing methods, and future scope10.1016/j.matpr.2022.08.049 ↗
6. Dentists’ most common practices when selecting an implant system10.1111/jopr.12691 ↗
7. A clinical comparison of 1-piece versus 2-piece implants: A systematic review and meta-analysis10.1016/j.prosdent.2019.08.002 ↗
8. Kowalski, J., Lapinska, B., Nissan, J., and Lukomska-Szymanska, M. (2021). Factors influencing marginal bone loss around dental implants: A narrative review. Coatings, 11.10.3390/coatings11070865 ↗
9. Influence of the abutment height on marginal bone level changes around two-piece dental implants: Meta-analysis and trial sequential analysis of randomized clinical trials10.1111/clr.14025 ↗
10. One-piece versus two-piece ceramic dental implants10.1038/s41415-024-7123-3 ↗
11. Clinical guideline for zirconia dental implants: A comprehensive and critical review and update
12. Single-piece implant systems and its longterm stability: An evaluative research10.4103/jpbs.jpbs_399_24 ↗
13. Prados-Privado, M., Bea, J.A., Rojo, R., Gehrke, S.A., Calvo-Guirado, J.L., and Prados-Frutos, J.C. (2017). A new model to study fatigue in dental implants based on probabilistic finite elements and cumulative damage model. Appl. Bionics Biomech., 2017.10.1155/2017/3726361 ↗
14. Barbosa, F.T., Zanatta, L.C.S., de Souza Rendohl, E., and Gehrke, S.A. (2021). Comparative analysis of stress distribution in one-piece and two-piece implants with narrow and extra-narrow diameters: A finite element study. PLoS ONE, 16.10.1371/journal.pone.0245800 ↗
15. The influence of functional forces on the biomechanics of implant-supported prostheses—A review10.1016/S0300-5712(02)00065-9 ↗
16. Applications of finite element analysis in dentistry: A review10.4103/JIOH.JIOH_11_21 ↗
17. Applications of finite element in implant dentistry and oral rehabilitation10.2174/1874210602115010392 ↗
18. Arı, I., Acar, G., Tosun, E., and Muhtaroğulları, M. (2024). Assessment of different treatment alternatives for patients with total maxillectomy. J. Prosthodont., 1–15. early view.10.1111/jopr.13947 ↗
19. Experimental evaluation of stress distribution with narrow diameter implants: A finite element analysis10.1016/j.prosdent.2017.04.024 ↗
20. Application of finite element model in implant dentistry: A systematic review10.4103/JPBS.JPBS_296_18 ↗
21. The use of finite element analysis in dentistry and orthodontics: Critical points for model development and interpreting results10.1053/j.sodo.2020.06.014 ↗
22. Cook, C.V., Lighty, A.M., Smith, B.J., and Ford Versypt, A.N. (2024). A review of mathematical modeling of bone remodeling from a systems biology perspective. Front. Syst. Biol., 4.10.3389/fsysb.2024.1368555 ↗
23. Gong, H., Zhu, D., Gao, J., Lv, L., and Zhang, X. (2010). An adaptation model for trabecular bone at different mechanical levels. Biomed. Eng. Online, 9.10.1186/1475-925X-9-32 ↗
24. Hambli, R. (2014). Connecting mechanics and bone cell activities in the bone remodeling process: An integrated finite element modeling. Front. Bioeng. Biotechnol., 2.10.3389/fbioe.2014.00006 ↗
25. Rajendran, A.K., Sankar, D., Amirthalingam, S., Kim, H.D., Rangasamy, J., and Hwang, N.S. (2023). Trends in mechanobiology guided tissue engineering and tools to study cell-substrate interactions: A brief review. Biomater. Res., 27.10.1186/s40824-023-00393-8 ↗
26. Computational models of bone fracture healing and applications: A review10.1515/bmt-2023-0088 ↗
27. Multiscale modeling of bone tissue mechanobiology10.1016/j.bone.2021.116032 ↗
28. (2024, August 10). IML Swiss SA Dental Implants. Available online: https://www.iml.swiss/docs/1680173704.pdf?t=1680490899.
29. (2024, August 09). SDS SWISS DENTAL SOLUTIONS AG. Available online: https://sds.directus.app/assets/5b953073-c3b1-4bf0-8999-ce96df4b3821/BRIGHT-Product-Catalog.pdf.
30. (2024, July 12). Tree·Oss Dental Implant System. Available online: https://tree-oss.com/2019/wp-content/uploads/2023/03/catalog-tree-oss-2023.pdf.
31. Retrospective assessment of endodontically treated teeth replaced by dental implants10.1016/j.joen.2023.12.002 ↗
32. Assessment and determination of human mandibular and dental arch profiles in subjects with lower third molar impaction in port harcourt, nigeria10.4103/2231-0746.92775 ↗
33. Alghamdi, H.S. (2018). Methods to improve osseointegration of dental implants in low quality (type-iv) bone: An overview. J. Funct. Biomater., 9.10.3390/jfb9010007 ↗
34. An effect of various parameters on insertion torque to improve the success rate of dental implantation: A review10.1016/j.matpr.2020.07.222 ↗
35. Comuzzi, L., Ceddia, M., Di Pietro, N., Inchingolo, F., Inchingolo, A.M., Romasco, T., Tumedei, M., Specchiulli, A., Piattelli, A., and Trentadue, B. (2023). Crestal and subcrestal placement of morse cone implant–abutment connection implants: An in vitro finite element analysis (fea) study. Biomedicines, 11.10.3390/biomedicines11113077 ↗
36. Ceddia, M., Romasco, T., Comuzzi, L., Cipollina, A., Piattelli, A., Dipalma, G., Inchingolo, A.M., Inchingolo, F., Di Pietro, N., and Trentadue, B. (2024). The influence of cement thickness within the cap on stress distribution for dental implants. J. Funct. Biomater., 15.10.20944/preprints202406.0706.v1 ↗
37. A three-dimensional finite element analysis of the stress distribution on morse taper implants surface10.1016/j.jpor.2013.02.003 ↗
38. Fatchurrohman, N., and Chia, S.T. (2017, January 1). Performance of hybrid nano-micro reinforced mg metal matrix composites brake calliper: Simulation approach. Proceedings of the Materials Science and Engineering Conference Series, Swiss Garden Hotel and Spa, Kuantan, Malaysia.10.1088/1757-899X/257/1/012060 ↗
39. Effect of dfferent palatal expanders with miniscrews in surgically assisted rapid palatal expansion: A non-linear finite element analysis10.1590/2177-6709.29.1.e2423195.oar ↗
40. Alshadidi, A.A.F., Dommeti, V.K., Aldosari, L.I.N., Hassan, S.A.B., Okshah, A., Merdji, A., and Roy, S. (2024). Influence of surface texturing and coatings on mechanical properties and integration with bone tissue: An in silico study. Front. Bioeng. Biotechnol., 12.10.3389/fbioe.2024.1439262 ↗
41. Finite element analysis of dental implant loading on atrophic and non-atrophic cancellous and cortical mandibular bone–a feasibility study10.1016/j.jbiomech.2014.10.019 ↗
42. Mehboob, H., Ouldyerou, A., and Ijaz, M.F. (2023). Biomechanical investigation of patient-specific porous dental implants: A finite element study. Appl. Sci., 13.10.3390/app13127097 ↗
43. Yang, Y., Liu, Y., Yuan, X., Ren, M., Chen, X., Luo, L., Zheng, L., and Liu, Y. (2023). Three-dimensional finite element analysis of stress distribution on short implants with different bone conditions and osseointegration rates. BMC Oral. Health, 23.10.1186/s12903-023-02945-9 ↗
44. Cicciù, M., Cervino, G., Milone, D., and Risitano, G. (2019). Fem analysis of dental implant-abutment interface overdenture components and parametric evaluation of equator® and locator® prosthodontics attachments. Materials, 12.10.3390/ma12040592 ↗
45. Finite element analysis of zirconia dental implant10.3390/prosthesis4030040 ↗
46. Fem and von mises analysis of osstem® dental implant structural components: Evaluation of different direction dynamic loads10.2174/1874210601812010219 ↗
47. Weight reduction of flapping micro aerial vehicles by electrical discharge wire machining
48. Finite element analysis of the effect of novel lock screw system preventing abutment screw loosening10.14368/jdras.2019.35.3.132 ↗
49. Biomechanical analyses of one-piece dental implants composed of titanium, zirconia, peek, cfr-peek, or gfr-peek: Stresses, strains, and bone remodeling prediction by the finite element method10.1002/jbm.b.34890 ↗
50. Influence of low-temperature environmental exposure on the mechanical properties and structural stability of dental zirconia10.1111/j.1532-849X.2011.00838.x ↗
51. Design of customized coated dental implants using finite element analysis10.17219/dmp/142447 ↗
52. Significance of orthotropic material models to predict stress around bone-implant interface using numerical simulation10.1007/s12668-019-00649-5 ↗
53. A comparative finite element simulation of stress in dental implant–bone interface using isotropic and orthotropic material models in three mastication cycles10.1007/s40430-018-1409-9 ↗
54. Three dimensional finite element analysis of the stress distribution around the mandibular posterior implant during non-working movement according to the amount of cantilever10.4047/jap.2014.6.5.361 ↗
55. Stress analysis in bone tissue around single implants with different diameters and veneering materials: A 3-d finite element study10.1016/j.msec.2013.07.027 ↗
56. Three-dimensional finite element stress pattern analysis in bone around implant-supported abutment with different angulations under axial and oblique load10.5005/jp-journals-10024-3464 ↗
57. Evaluation of stress generated with different abutment materials and angulations under axial and oblique loading in the anterior maxilla: Three-dimensional finite element analysis10.1155/2021/9205930 ↗
58. Effect of different restorative crown and customized abutment materials on stress distribution in single implants and peripheral bone: A three-dimensional finite element analysis study10.1016/j.prosdent.2017.03.008 ↗
59. Stress evaluation of implant-abutment connections under different loading conditions: A 3d finite element study10.1563/AAID-JOI-D-11-00205 ↗
60. Fiorillo, L., Cicciù, M., D’Amico, C., Mauceri, R., Oteri, G., and Cervino, G. (2020). Finite element method and von mises investigation on bone response to dynamic stress with a novel conical dental implant connection. Biomed. Res. Int., 2020.10.1155/2020/2976067 ↗
61. Biomechanical evaluation of anterior implants associated with titanium and zirconia abutments and monotype zirconia implants10.2186/jpr.JPOR_2019_527 ↗
62. Finite element analysis of stress in anterior prosthetic rehabilitation with zirconia implants with and without cantilever10.1055/s-0041-1727544 ↗
63. Fabris, D., Fredel, M.C., Souza, J.C., Silva, F.S., and Henriques, B. (2021). Biomechanical behavior of functionally graded s53p4 bioglass-zirconia dental implants: Experimental and finite element analyses. J. Mech. Behav. Biomed. Mater., 120.10.1016/j.jmbbm.2021.104565 ↗
64. Influence of different abutment designs on the biomechanical behavior of one-piece zirconia dental implants and their surrounding bone: A 3d-fea10.1016/j.irbm.2019.07.001 ↗
65. Effects of implant tilting and the loading direction on the displacement and micromotion of immediately loaded implants: An in vitro experiment and finite element analysis10.5051/jpis.2017.47.4.251 ↗
66. Implant micromotion is related to peak insertion torque and bone density10.1111/j.1600-0501.2008.01679.x ↗
67. Micro finite element analysis of dental implants under different loading conditions10.1016/j.compbiomed.2018.03.012 ↗
68. One-piece versus two-piece zirconia abutment supported single implant crown in the esthetic region: 3-year results from a split-mouth randomized controlled clinical trial10.1111/clr.14173 ↗