journal article·2023-06-17Open access

Fabrication of Novel Pre-Polymerized BisGMA/Silica Nanocomposites: Physio-Mechanical Considerations

Ali Alrahlah, Rawaiz Khan, Abdel-Basit Al-Odayni, Waseem Sharaf Saeed, Leonel S. Bautista, Sajjad Haider, Merry Angelyn Tan De Vera, Abdulrahman Alshabib

Abstract

Resin composite mimics tooth tissues both in structure and properties, and thus, they can withstand high biting force and the harsh environmental conditions of the mouth. Various inorganic nano- and micro-fillers are commonly used to enhance these composites’ properties. In this study, we adopted a novel approach by using pre-polymerized bisphenol A-glycidyl methacrylate (BisGMA) ground particles (XL-BisGMA) as fillers in a BisGMA/triethylene glycol dimethacrylate (TEGDMA) resin system in combination with SiO2 nanoparticles. The BisGMA/TEGDMA/SiO2 mixture was filled with various concentrations of XL-BisGMA (0, 2.5, 5, and 10 wt.%). The XL-BisGMA added composites were evaluated for viscosity, degree of conversion (DC), microhardness, and thermal properties. The results demonstrated that the addition of a lower concentration of XL-BisGMA particles (2.5 wt.%) significantly reduced (p ≤ 0.05) the complex viscosity from 374.6 (Pa·s) to 170.84. (Pa·s). Similarly, DC was also increased significantly (p ≤ 0.05) by the addition of 2.5 wt.% XL-BisGMA, with the pristine composite showing a DC of (62.19 ± 3.2%) increased to (69.10 ± 3.4%). Moreover, the decomposition temperature has been increased from 410 °C for the pristine composite (BT-SB0) to 450 °C for the composite with 10 wt.% of XL-BisGMA (BT-SB10). The microhardness has also been significantly reduced (p ≤ 0.05) from 47.44 HV for the pristine composite (BT-SB0) to 29.91 HV for the composite with 2.5 wt.% of XL-BisGMA (BT-SB2.5). These results suggest that a XL-BisGMA could be used to a certain percentage as a promising filler in combination with inorganic fillers to enhance the DC and flow properties of the corresponding resin-based dental composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Orthodontics and Dentofacial Orthopedics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Restorative Dental Sciences Department, College of Dentistry, King Saud University, Riyadh 11545, Saudi Arabia

Engineer Abdullah Bugshan Research Chair for Dental and Oral Rehabilitation, College of Dentistry, King Saud University, Riyadh 11545, Saudi Arabia

Department of Chemical Engineering, College of Engineering, King Saud University, Riyadh 11421, Saudi Arabia

Research Center, College of Dentistry, King Saud University, Riyadh 11451, Saudi Arabia

Funding

Deputyship for Research and Innovation, Ministry of Education in Saudi Arabia

References (55)

Show source-provided references
1. Nano-composite dental resins: An overview
2. Gopikrishna, V. (2013). Sturdevant’s Art & Science of Operative Dentistry-E-Book: A South Asian Edition, Elsevier Health Sciences.
3. Survival, reasons for failure and clinical characteristics of anterior/posterior composites: 8-year findings10.1590/0103-6440201802192 ↗
4. Influence of filler characteristics on the performance of dental composites: A comprehensive review10.1016/j.ceramint.2022.06.314 ↗
5. Fabrication and evaluation of Bis-GMA/TEGDMA dental resins/composites containing nano fibrillar silicate10.1016/j.dental.2007.05.002 ↗
6. Development of novel dental nanocomposites reinforced with polyhedral oligomeric silsesquioxane (POSS)10.1016/j.dental.2009.11.161 ↗
7. Nanoparticle-reinforced resin-based dental composites10.1016/j.jdent.2008.03.001 ↗
8. Low shrinkage light curable nanocomposite for dental restorative material10.1016/j.dental.2005.02.012 ↗
9. Electrospun nylon 6 nanofiber reinforced BIS-GMA/TEGDMA dental restorative composite resins10.1016/j.polymer.2004.01.067 ↗
10. Investigation of mechanical properties of experimental Bis-GMA/TEGDMA dental composite resins containing various mass fractions of silica nanoparticles
11. Mechanical properties of experimental dental composites containing a combination of mesoporous and nonporous spherical silica as fillers10.1016/j.dental.2008.07.012 ↗
12. Low-shrinkage visible-light-curable urethane-modified epoxy acrylate/SiO2 composites as dental restorative materials10.1016/j.compscitech.2008.06.015 ↗
13. Barszczewska-Rybarek, I.M., Chrószcz, M.W., and Chladek, G. (2020). Novel urethane-dimethacrylate monomers and compositions for use as matrices in dental restorative materials. Int. J. Mol. Sci., 21.10.3390/ijms21072644 ↗
14. Resin based restorative dental materials: Characteristics and future perspectives10.1016/j.jdsr.2019.09.004 ↗
15. Relationship between composite matrix molecular structure and properties10.1016/S0142-9612(98)00047-7 ↗
16. The semi-interpenetrating polymer network matrix of fiber-reinforced composite and its effect on the surface adhesive properties
17. Synthesis of chemically modified BisGMA analog with low viscosity and potential physical and biological properties for dental resin composite10.1016/j.dental.2019.07.013 ↗
18. Alrahlah, A., Al-Odayni, A.-B., Al-Mutairi, H.F., Almousa, B.M., Alsubaie, F.S., Khan, R., and Saeed, W.S. (2021). A Low-Viscosity BisGMA Derivative for Resin Composites: Synthesis, Characterization, and Evaluation of Its Rheological Properties. Materials, 14.10.3390/ma14020338 ↗
19. Effects of two amine reducing agents on the degree of conversion and physical properties of an unfilled light-cured resin10.1016/0109-5641(93)90069-3 ↗
20. Dimethacrylate network formation and polymer property evolution as determined by the selection of monomers and curing conditions10.1016/j.dental.2011.09.005 ↗
21. Tarle, Z. (2018). Dental Composite Materials for Direct Restorations, Springer International Publishing.
22. Resin composite—State of the art10.1016/j.dental.2010.10.020 ↗
23. New inorganic components for dental filling composites10.1007/s00706-004-0254-y ↗
24. Characterization of light-cured dimethacrylate resins modified with silsesquioxanes10.1007/s10853-010-5074-3 ↗
25. Preparation and characterization of light-cured methacrylate/montmorillonite nanocomposites10.1002/pi.2935 ↗
26. Update on dental nanocomposites10.1177/0022034510363765 ↗
27. Prepolymerized organic–inorganic hybrid nanoparticles as fillers for light-cured methacrylate monomers10.1007/s10853-011-6128-x ↗
28. Monodisperse silica-filled composite restoratives mechanical and light transmission properties10.1016/j.dental.2016.12.008 ↗
29. Alrahlah, A., Al-Odayni, A.-B., Saeed, W.S., Abduh, N.A.Y., Khan, R., Alshabib, A., Almajhdi, F.F.N., Alodeni, R.M., and De Vera, M.A.T. (2023). Influence of Eugenol and Its Novel Methacrylated Derivative on the Polymerization Degree of Resin-Based Composites. Polymers, 15.10.3390/polym15051124 ↗
30. Controllable synthesis of raspberry-like PS–SiO2 nanocomposite particles via Pickering emulsion polymerization10.1039/C7RA13086D ↗
31. Mechanical properties of monolayer graphene oxide10.1021/nn101781v ↗
32. Alrahlah, A., Khan, R., Al-Odayni, A.-B., Saeed, W.S., Bautista, L.S., and Vohra, F. (2020). Evaluation of Synergic Potential of rGO/SiO2 as Hybrid Filler for BisGMA/TEGDMA Dental Composites. Polymers, 12.10.3390/polym12123025 ↗
33. Restorative dentistry and restorative materials over the next 20 years: A Delphi survey10.1016/j.dental.2014.01.013 ↗
34. Odian, G. (2004). Principles of Polymerization, John Wiley & Sons.10.1002/047147875X ↗
35. Correlation of resin viscosity and monomer conversion to filler particle size in dental composites10.1016/j.dental.2018.06.008 ↗
36. Influence of BisGMA, TEGDMA, and BisEMA contents on viscosity, conversion, and flexural strength of experimental resins and composites10.1111/j.1600-0722.2009.00636.x ↗
37. The effect of filler and silane content on conversion of resin-based composite10.1016/S0109-5641(02)00062-3 ↗
38. Flowable Resin Composites: A Systematic Review and Clinical Considerations
39. Resin composites in dentistry: The monomer systems10.1111/j.1600-0722.1997.tb00188.x ↗
40. Effects of monomer ratios and highly radiopaque fillers on degree of conversion and shrinkage-strain of dental resin composites10.1016/j.dental.2009.06.009 ↗
41. Comparison of Different Bleaching Treatments Effect on Micro Hardness of Four Different Aged Composites
42. The effect of a 10% carbamide peroxide bleaching agent on the microhardness of four types of direct resin-based restorative materials10.2341/12-224-L ↗
43. Effects of in-office tooth whiteners on hardness of tooth-colored restoratives
44. Influence of polymerization time and depth of cure of resin composites determined by Vickers hardness
45. Colombo, M., Gallo, S., Poggio, C., Ricaldone, V., Arciola, C.R., and Scribante, A. (2020). New resin-based bulk-fill composites: In vitro evaluation of micro-hardness and depth of cure as infection risk indexes. Materials, 13.10.3390/ma13061308 ↗
46. Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins10.1016/S0109-5641(85)80058-0 ↗
47. Correlation between degree of conversion, filler concentration and mechanical properties of posterior composite resins10.1111/j.1365-2842.1990.tb01419.x ↗
48. Hardness and degree of conversion of posterior packable composites
49. Evaluation of a biobased polycarbonate interpenetrated network in a dental resin composite10.1016/j.jmbbm.2023.105876 ↗
50. Properties of hybrid resin composite systems containing prepolymerized filler particles10.2341/08-118-L ↗
51. Diametral Tensile Strength, Flexural Strength, and Surface Microhardness of Bioactive Bulk Fill Restorative10.5005/jp-journals-10024-2205 ↗
52. Thermal degradation of epoxy–silica organic–inorganic hybrid materials10.1016/j.polymdegradstab.2005.04.024 ↗
53. Degradation of epoxy polymers: Part 4—Thermal degradation of bisphenol-A diglycidyl ether cured with ethylene diamine10.1016/0141-3910(86)90011-X ↗
54. Semi-quantitative analysis of thermal degradation in polyphenylene-ether10.1016/S0141-3910(00)00033-1 ↗
55. In situ stabilized carbon nanofiber (CNF) reinforced epoxy nanocomposites10.1039/c0jm00063a ↗