The Influence of Polishing and Artificial Aging on BioMed Amber® Resin’s Mechanical Properties
Source abstract
Abstract
Currently, 3D print is becoming more common in all branches of medicine, including dentistry. Some novel resins, such as BioMed Amber (Formlabs), are used and incorporated to more advanced techniques. The aims of the study were to check whether or not polishing and/or artificial aging influences the properties of the 3D-printed resin. A total of 240 specimens of BioMed Resin were printed. Two shapes (rectangular and dumbbell) were prepared. Of each shape, 120 specimens were divided into four groups each (with no influence, after polishing only, after artificial aging only, and after both polishing and artificial aging). Artificial aging took place in water at the temperature of 37 °C for 90 days. For testing, the universal testing machine (Z10-X700, AML Instruments, Lincoln, UK) was used. The axial compression was performed with the speed of 1mm/min. The tensile modulus was measured with the constant speed of 5 mm/min. The highest resistance to compression and tensile test were observed in the specimens that were neither polished nor aged (0.88 ± 0.03 and 2.88 ± 0.26, respectively). The lowest resistance to compression was observed in the specimens that were not polished, but aged (0.70 ± 0.02). The lowest results of the tensile test were observed when specimens were both polished and aged (2.05 ± 0.28). Both polishing and artificial aging weakened the mechanical properties of the BioMed Amber resin. The compressive modulus changed much with or without polishing. The tensile modulus differed in specimens that were either polished or aged. The application of both did not change the properties when compared to the polished or aged probes only.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Anatomy and Medical Technology · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Division of Dentofacial Anomalies, Department of Orthodontics and Dentofacial Orthopedics, Wrocław Medical University, Krakowska 26, 50-425 Wrocław, Poland
Department of Experimental Dentistry, Wrocław Medical University, Krakowska 26, 50-425 Wrocław, Poland
Funding
Wroclaw Medical University
References (32)
Show source-provided references
1. 3D printing in dentistry10.1038/sj.bdj.2015.914 ↗
2. A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications10.1155/2021/9950131 ↗
3. Küffer, M., Drescher, D., and Becker, K. (2022). Application of the Digital Workflow in Orofacial Orthopedics and Orthodontics: Printed Appliances with Skeletal Anchorage. Appl. Sci., 12.10.3390/app12083820 ↗
4. 3D-printing techniques in a medical setting: A systematic literature review10.1186/s12938-016-0236-4 ↗
5. 3D and 4D printing in dentistry and maxillofacial surgery: Printing techniques, materials, and applications10.1016/j.actbio.2020.12.044 ↗
6. Paradowska-Stolarz, A., Malysa, A., and Mikulewicz, M. (2022). Comparison of the Compression and Tensile Modulus of Two Chosen Resins Used in Dentistry for 3D Printing. Materials, 15.10.3390/ma15248956 ↗
7. Paradowska-Stolarz, A., Wezgowiec, J., and Mikulewicz, M. (2023). Comparison of Two Chosen 3D Printing Resins Designed for Orthodontic Use: An In Vitro Study. Materials, 16.10.3390/ma16062237 ↗
8. Evaluation of the color stability of temporary materials produced with CAD/CAM10.17219/dmp/126745 ↗
9. Grzebieluch, W., Kowalewski, P., Grygier, D., Rutkowska-Gorczyca, M., Kozakiewicz, M., and Jurczyszyn, K. (2021). Printable and Machinable Dental Restorative Composites for CAD/CAM Application-Comparison of Mechanical Properties, Fractographic, Texture and Fractal Dimension Analysis. Materials, 14.10.3390/ma14174919 ↗
10. Impact of artificial aging by thermocycling on edge chipping resistance and Martens hardness of different dental CAD-CAM restorative materials10.1016/j.prosdent.2019.12.022 ↗
11. Translucency of Zirconia Ceramics before and after Artificial Aging10.1111/jopr.12771 ↗
12. Ilie, N. (2023). Accelerated versus Slow In Vitro Aging Methods and Their Impact on Universal Chromatic, Urethane-Based Composites. Materials, 16.10.3390/ma16062143 ↗
13. (2002). Plastics-Determination of Compressive Properties (Standard No. ISO 604:2002).
14. (2019). Plastics—Determination of Tensile Properties—Part 1: General Principles (Standard No. ISO 527-1:2019).
15. Vasoglou, G., Stefanidaki, I., Apostolopoulos, K., Fotakidou, E., and Vasoglou, M. (2022). Accuracy of Mini-Implant Placement Using a Computer-Aided Designed Surgical Guide, with Information of Intraoral Scan and the Use of a Cone-Beam CT. Dent. J., 10.10.3390/dj10060104 ↗
16. Malysa, A., Wezgowiec, J., Grzebieluch, W., Danel, D.P., and Wieckiewicz, M. (2022). Effect of Thermocycling on the Bond Strength of Self-Adhesive Resin Cements Used for Luting CAD/CAM Ceramics to Human Dentin. Int. J. Mol. Sci., 23.10.3390/ijms23020745 ↗
17. Effects of staining and artificial aging on optical properties of gingiva-colored resin-based restorative materials10.1007/s00784-022-04643-2 ↗
18. Color stability of self-adhering composite resins in different solutions10.17219/dmp/114099 ↗
19. El-Rashidy, A.A., Abdelraouf, R.M., and Habib, N.A. (2022). Effect of two artificial aging protocols on color and gloss of single-shade versus multi-shade resin composites. BMC Oral Health, 22.10.1186/s12903-022-02351-7 ↗
20. Gómez-Polo, C., Martín Casado, A.M., Quispe, N., Gallardo, E.R., and Montero, J. (2023). Colour Changes of Acetal Resins (CAD-CAM) In Vivo. Appl. Sci., 13.10.3390/app13010181 ↗
21. Mazzitelli, C., Paolone, G., Sabbagh, J., Scotti, N., and Vichi, A. (2023). Color Stability of Resin Cements after Water Aging. Polymers, 15.10.3390/polym15030655 ↗
22. Warnecki, M., Sarul, M., Kozakiewicz, M., Zięty, A., Babiarczuk, B., Kawala, B., and Jurczyszyn, K. (2022). Surface Evaluation of Aligners after Immersion in Coca-Cola and Orange Juice. Materials, 15.10.3390/ma15186341 ↗
23. Effect of staining and bleaching on the microhardness, surface roughness and color of different composite resins10.17219/dmp/131022 ↗
24. Paolone, G., Mandurino, M., De Palma, F., Mazzitelli, C., Scotti, N., Breschi, L., Gherlone, E., Cantatore, G., and Vichi, A. (2023). Color Stability of Polymer-Based Composite CAD/CAM Blocks: A Systematic Review. Polymers, 15.10.3390/polym15020464 ↗
25. A novel CAD/CAM resin composite block with high mechanical properties10.1016/j.dental.2021.03.006 ↗
26. Effect of thermocycling on the shear bond strength of different resins bonded to thermoplastic foil applied in occlusal splint therapy10.1111/jopr.12190 ↗
27. Polishing effects and wear performance of chairside CAD/CAM materials10.1007/s00784-018-2473-3 ↗
28. Rezaie, F., Farshbaf, M., Dahri, M., Masjedi, M., Maleki, R., Amini, F., Wirth, J., Moharamzadeh, K., Weber, F.E., and Tayebi, L. (2023). 3D Printing of Dental Prostheses: Current and Emerging Applications. J. Compos. Sci., 7.10.3390/jcs7020080 ↗
29. Efficacy of polishing kits on the surface roughness and color stability of different composite resins10.4103/1119-3077.181387 ↗
30. Jaramillo-Cartagena, R., López-Galeano, E.J., Latorre-Correa, F., and Agudelo-Suárez, A.A. (2021). Effect of Polishing Systems on the Surface Roughness of Nano-Hybrid and Nano-Filling Composite Resins: A Systematic Review. Dent. J., 9.10.3390/dj9080095 ↗
31. Effects of air polishing on the resin composite-dentin interface10.1007/s10266-013-0111-8 ↗
32. Paradowska-Stolarz, A., Wieckiewicz, M., Kozakiewicz, M., and Jurczyszyn, K. (2023). Mechanical Properties, Fractal Dimension, and Texture Analysis of Selected 3D-Printed Resins Used in Dentistry That Underwent the Compression Test. Polymers, 15.10.3390/polym15071772 ↗