journal article·2023-02-26Open access

In-Vitro Evaluation of Photofunctionalized Implant Surfaces in a High-Glucose Microenvironment Simulating Diabetics

Supriya Kheur, Mohit Kheur, Vaibhav Madiwal, Ramandeep Sandhu, Tabrez Lakha, Jyutika Rajwade, Tan Fırat Eyüboğlu, Mutlu Özcan

Abstract

The present study aimed to assess the efficacy of photofunctionalization on commercially available dental implant surfaces in a high-glucose environment. Discs of three commercially available implant surfaces were selected with various nano- and microstructural alterations (Group 1—laser-etched implant surface, Group 2—titanium–zirconium alloy surface, Group 3—air-abraded, large grit, acid-etched surface). They were subjected to photo-functionalization through UV irradiation for 60 and 90 min. X-ray photoelectron spectroscopy (XPS) was used to analyze the implant surface chemical composition before and after photo-functionalization. The growth and bioactivity of MG63 osteoblasts in the presence of photofunctionalized discs was assessed in cell culture medium containing elevated glucose concentration. The normal osteoblast morphology and spreading behavior were assessed under fluorescence and phase-contrast microscope. MTT (3-(4,5 Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) and alizarin red assay were performed to assess the osteoblastic cell viability and mineralization efficiency. Following photofunctionalization, all three implant groups exhibited a reduced carbon content, conversion of Ti4+ to Ti3+, increased osteoblastic adhesion, viability, and increased mineralization. The best osteoblastic adhesion in the medium with increased glucose was seen in Group 3. Photofunctionalization altered the implant surface chemistry by reducing the surface carbon content, probably rendering the surfaces more hydrophilic and conducive for osteoblastic adherence and subsequent mineralization in high-glucose environment.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental Implant Techniques and Outcomes · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Oral Pathology and Microbiology, Dr. D. Y. Patil Dental College and Hospital, Dr. D. Y. Patil Vidyapeeth, Pune 411044, India

Department of Prosthodontics, M.A. Rangoonwala College of Dental Sciences and Research Centre, Pune 411001, India

Nanobioscience Group, Agharkar Research Institute, Pune 411004, India

Department of Fixed Prosthodontics, Holland Bloorview Kids Rehabilitation Hospital, University of Toronto, Toronto, ON M4G 1R8, Canada

Department of Endodontics, Faculty of Dentistry, Istanbul Medipol University, 34083 Istanbul, Turkey

Head Division of Dental Biomaterials, Director a.i. Clinic of Masticatory Disorders, Center of Dental Medicine, Clinic of Reconstructive Dentistry, University of Zurich, CH-8032 Zurich, Switzerland

Funding

International Team for Implantology (ITI) Short-Term Research

References (44)

Show source-provided references
1. Surface characteristics of dental implants: A review10.1016/j.dental.2017.09.007 ↗
2. The effect of ultraviolet functionalization of titanium on integration with bone10.1016/j.biomaterials.2008.11.004 ↗
3. A review on the wettability of dental implant surfaces II: Biological and clinical aspects10.1016/j.actbio.2014.03.032 ↗
4. Impact of Dental Implant Surface Modifications on Osseointegration10.1155/2016/6285620 ↗
5. Role of Photofunctionalization in Mitigating Impaired Osseointegration Associated with Type 2 Diabetes in Rats10.11607/jomi.3480 ↗
6. Structural characterization of pulsed laser-deposited hydroxyapatite film on titanium substrate10.1016/S0142-9612(97)00024-0 ↗
7. Carossa, M., Cavagnetto, D., Mancini, F., Mosca Balma, A., and Mussano, F. (2022). Plasma of Argon Treatment of the Implant Surface, Systematic Review of In Vitro Studies. Biomolecules, 12.10.3390/biom12091219 ↗
8. Photofunctionalization as a suitable approach to improve the osseointegration of implants in animal models—A systematic review and meta-analysis10.1111/clr.13627 ↗
9. Success Rate, Healing Time, and Implant Stability of Photofunctionalized Dental Implants10.11607/jomi.3263 ↗
10. Photofunctionalized Dental Implants: A Case Series in Compromised Bone10.11607/jomi.3232 ↗
11. Accelerated bone formation on photo-induced hydrophilic titanium implants: An experimental study in the dog mandible10.1111/j.1600-0501.2011.02401.x ↗
12. Ikeda, T., Okubo, T., Saruta, J., Hirota, M., Kitajima, H., Yaagisawa, N., and Ogawa, T. (2021). Osteoblast attachment compromised by high and low temperature of titanium and its restoration by UV photofunctionalization. Materials, 14.10.3390/ma14195493 ↗
13. Okonkwo, U., and DiPietro, L. (2017). Diabetes and Wound Angiogenesis. Int. J. Mol. Sci., 18.10.3390/ijms18071419 ↗
14. Serum Osteocalcin Level Is Associated with Glucose Metabolism and Atherosclerosis Parameters in Type 2 Diabetes Mellitus10.1210/jc.2008-1455 ↗
15. Bone Loss and Bone Turnover in Diabetes10.2337/diab.44.7.775 ↗
16. Osteocalcin levels in diabetic subjects10.1007/BF02556002 ↗
17. Bone structure and turnover in type 2 diabetes mellitus10.1007/s00198-011-1595-0 ↗
18. Osteocytic signalling pathways as therapeutic targets for bone fragility10.1038/nrendo.2016.71 ↗
19. Chronic hyperglycemia as a risk factor in implant therapy10.1111/prd.12283 ↗
20. The impact of diabetes on dental implant failure: A systematic review and meta-analysis10.1016/j.ijom.2016.05.019 ↗
21. Association between diabetes and dental implant complications: A systematic review and meta-analysis10.1080/00016357.2020.1761031 ↗
22. Al Ansari, Y., Shahwan, H., and Chrcanovic, B.R. (2022). Diabetes Mellitus and Dental Implants: A Systematic Review and Meta-Analysis. Materials, 15.10.3390/ma15093227 ↗
23. Elevated glucose acts directly on osteocytes to increase sclerostin expression in diabetes10.1038/s41598-019-52224-3 ↗
24. Ultraviolet Photofunctionalization of Titanium Implants10.11607/jomi.te47 ↗
25. Copper cobalt sulphide nanosheets realizing a promising electrocatalytic oxygen evolution reaction10.1021/acscatal.7b01831 ↗
26. Gao, Y., Liu, Y., Zhou, L., Guo, Z., Rong, M., Liu, X., Lai, C., and Ding, X. (2013). The Effects of Different Wavelength UV Photofunctionalization on Micro-Arc Oxidized Titanium. PLoS ONE, 8.10.1371/journal.pone.0068086 ↗
27. Time-dependent degradation of titanium osteoconductivity: An implication of biological aging of implant materials10.1016/j.biomaterials.2009.06.040 ↗
28. XPS, AES and SEM analysis of recent dental implants10.1016/j.actbio.2009.01.049 ↗
29. Spectroscopic studies of three osseointegrated implants10.1016/S0300-5712(96)00080-2 ↗
30. Roy, M., Pompella, A., Kubacki, J., Szade, J., Roy, R.A., and Hedzelek, W. (2016). Photofunctionalization of Titanium: An Alternative Explanation of Its Chemical-Physical Mechanism. PLoS ONE, 11.10.1371/journal.pone.0157481 ↗
31. Mechanism of Photoinduced Superhydrophilicity on the TiO2 Photocatalyst Surface10.1021/jp058075i ↗
32. Electrostatic control of protein adsorption on UV-photofunctionalized titanium10.1016/j.actbio.2010.05.006 ↗
33. Anpo, M., and Kamat, P. (2010). Environmentally Benign Photocatalysts. Nanostructure Science and Technology, Springer.10.1007/978-0-387-48444-0 ↗
34. TiO2 micro-nano-hybrid surface to alleviate biological aging of UV-photofunctionalized titanium10.2147/IJN.S22099 ↗
35. Synergistic effects of UV photofunctionalization and micro-nano hybrid topography on the biological properties of titanium10.1016/j.biomaterials.2011.03.001 ↗
36. Enhancement of osteoblast adhesion to UV-photofunctionalized titanium via an electrostatic mechanism10.1016/j.biomaterials.2009.12.024 ↗
37. Hydrocarbon Deposition Attenuates Osteoblast Activity on Titanium10.1177/0022034514536578 ↗
38. Relevant aspects in the surface properties in titanium dental implants for the cellular viability10.1016/j.msec.2016.03.049 ↗
39. Comparison of osteoblast spreading on microstructured dental implant surfaces and cell behaviour in an explant model of osseointegration10.1111/j.1600-0501.2005.01168.x ↗
40. Effects of photofunctionalization on early osseointegration of titanium dental implants in the maxillary posterior region: A randomized double-blinded clinical trial10.1186/s40729-021-00318-x ↗
41. Chang, L.C. (2022). Clinical Applications of Photofunctionalization on Dental Implant Surfaces: A Narrative Review. J. Clin. Med., 11.10.3390/jcm11195823 ↗
42. Roy, M., Corti, A., Dorocka-Bobkowska, B., and Pompella, A. (2022). Positive Effects of UV-Photofunctionalization of Titanium Oxide Surfaces on the Survival and Differentiation of Osteogenic Precursor Cells—An In Vitro Study. J. Funct. Biomater., 13.10.3390/jfb13040265 ↗
43. Photofunctionalization increases the bioactivity and osteoconductivity of the titanium alloy Ti6Al4V10.1002/jbm.a.35030 ↗
44. Ultraviolet Treatment Overcomes Time-Related Degrading Bioactivity of Titanium10.1089/ten.tea.2008.0568 ↗