journal article·2022-11-11Open access

Escherichia coli Biofilm Formation, Motion and Protein Patterns on Hyaluronic Acid and Polydimethylsiloxane Depend on Surface Stiffness

Annabelle Vigué, Dominique Vautier, Amad Kaytoue, Bernard Senger, Youri Arntz, Vincent Ball, Amine Ben Mlouka, Varvara Gribova, Samar Hajjar-Garreau, Julie Hardouin, Thierry Jouenne, Philippe Lavalle, Lydie Ploux

Abstract

The surface stiffness of the microenvironment is a mechanical signal regulating biofilm growth without the risks associated with the use of bioactive agents. However, the mechanisms determining the expansion or prevention of biofilm growth on soft and stiff substrates are largely unknown. To answer this question, we used PDMS (polydimethylsiloxane, 9–574 kPa) and HA (hyaluronic acid gels, 44 Pa–2 kPa) differing in their hydration. We showed that the softest HA inhibited Escherichia coli biofilm growth, while the stiffest PDMS activated it. The bacterial mechanical environment significantly regulated the MscS mechanosensitive channel in higher abundance on the least colonized HA-44Pa, while Type-1 pili (FimA) showed regulation in higher abundance on the most colonized PDMS-9kPa. Type-1 pili regulated the free motion (the capacity of bacteria to move far from their initial position) necessary for biofilm growth independent of the substrate surface stiffness. In contrast, the total length travelled by the bacteria (diffusion coefficient) varied positively with the surface stiffness but not with the biofilm growth. The softest, hydrated HA, the least colonized surface, revealed the least diffusive and the least free-moving bacteria. Finally, this shows that customizing the surface elasticity and hydration, together, is an efficient means of affecting the bacteria’s mobility and attachment to the surface and thus designing biomedical surfaces to prevent biofilm growth.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bacterial biofilms and quorum sensing · Inhalation and Respiratory Drug Delivery · Polymer Surface Interaction Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

INSERM UMR-S 1121 Biomaterial Bioengineering, Centre de Recherche en Biomédecine de Strasbourg, 67084 Strasbourg, France

Faculty of Dentistry, University of Strasbourg, 67000 Strasbourg, France

PISSARO Proteomic Facility, IRIB, 76130 Mont-Saint-Aignan, France

Mulhouse Materials Science Institute, CNRS/Haute Alsace University, 68057 Mulhouse, France

Polymers, Biopolymers, Surfaces Laboratory, CNRS/UNIROUEN/INSA Rouen, Normandie University, 76821 Rouen, France

CNRS, 67037 Strasbourg, France

Funding

Region Grand Est · Agence Nationale pour la Recherche

References (90)

Show source-provided references
1. The epidemic of antibiotic-resistant infections: A call to action for the medical community from the Infectious Diseases Society of America10.1086/524891 ↗
2. World Health Organization (2015). Antibiotic Resistance: Multi-Country Public Awareness Survey.
3. Bacterial biofilms: A common cause of persistent infections10.1126/science.284.5418.1318 ↗
4. Romeo, T. (2008). Escherichia coli biofilms. Bacterial Biofilms, Springer.10.1007/978-3-540-75418-3 ↗
5. Bacterial deposition to fluoridated and non-fluoridated polyurethane coatings with different elastic modulus and surface tension in a parallel plate and a stagnation point flow chamber10.1016/S0927-7765(03)00159-0 ↗
6. Vesicular structures self-assembled from oligonucleotide-polymer hybrids: Mechanical prevention of bacterial colonization upon their surface tethering through hybridization10.1002/adfm.201200988 ↗
7. Substrata mechanical stiffness can regulate adhesion of viable bacteria10.1021/bm701430y ↗
8. Influence of polyelectrolyte film stiffness on bacterial growth10.1021/bm301774a ↗
9. Harapanahalli, A.K., Younes, J.A., Allan, E., van der Mei, H.C., and Busscher, H.J. (2015). Chemical signals and mechanosensing in bacterial responses to their environment. PLoS Pathog., 11.10.1371/journal.ppat.1005057 ↗
10. Mechanomicrobiology: How bacteria sense and respond to forces10.1038/s41579-019-0314-2 ↗
11. Extracellular matrix stiffness modulates host-bacteria interactions and antibiotic therapy of bacterial internalization10.1016/j.biomaterials.2021.121098 ↗
12. Stiffness of cross-linked poly(dimethylsiloxane) affects bacterial adhesion and antibiotic susceptibility of attached cells10.1021/la502029f ↗
13. Bacterial adhesion on soft materials: Passive physicochemical interactions or active bacterial mechanosensing?10.1002/adhm.201801323 ↗
14. Alteration of bacterial adhesion induced by the substrate stiffness10.1016/j.colsurfb.2013.10.010 ↗
15. Fewer bacteria adhere to softer hydrogels10.1021/acsami.5b04269 ↗
16. Recent advances in hyaluronic acid hydrogels for biomedical applications10.1016/j.copbio.2016.02.008 ↗
17. Hyaluronic acid and chondroitin sulfate (meth)acrylate-based hydrogels for tissue engineering: Synthesis, characteristics and pre-clinical evaluation10.1016/j.biomaterials.2020.120602 ↗
18. Polyanionic hydrogels as reservoirs for polycationic antibiotic substitutes providing prolonged antibacterial activity10.1021/acsami.9b23140 ↗
19. High-resolution X-ray photoemission spectrum of the valence bands of gold10.1103/PhysRevB.5.4709 ↗
20. High resolution XPS of organic polymers: The Scienta ESCA300 database10.1021/ed070pA25.5 ↗
21. A study of HMDSO/O2 plasma deposits using a high-sensitivity and -energy resolution XPS instrument: Curve fitting of the Si 2p core level10.1016/S0169-4332(98)00479-6 ↗
22. Gwyddion: An open-source software for SPM data analysis10.2478/s11534-011-0096-2 ↗
23. Brutin, D. (2015). Chapter 2—Contact angles and the surface free energy of solids. Droplet Wetting and Evaporation, Academic Press.10.1016/B978-0-12-800722-8.00003-5 ↗
24. Definitions for hydrophilicity, hydrophobicity, and superhydrophobicity: Getting the basics right10.1021/jz402762h ↗
25. Isolation of an Escherichia coli K-12 mutant strain able to form biofilms on inert surfaces: Involvement of a new ompR allele that increases curli expression10.1128/JB.180.9.2442-2449.1998 ↗
26. Regional variations in stiffness in live mouse brain tissue determined by depth-controlled indentation mapping10.1038/s41598-018-31035-y ↗
27. Determination of elastic moduli of thin layers of soft material using the atomic force microscope10.1016/S0006-3495(02)75620-8 ↗
28. Dual fluorescence system for flow cytometric analysis of Escherichia coli transcriptional response in multi-species context10.1016/j.mimet.2008.09.015 ↗
29. Wetting: Statics and dynamics10.1103/RevModPhys.57.827 ↗
30. Rasband, W. (1997). ImageJ, U.S. National Institutes of Health.
31. Quantification of biofilm structures by the novel computer program COMSTAT10.1099/00221287-146-10-2395 ↗
32. Methods for cell and particle tracking10.1016/B978-0-12-391857-4.00009-4 ↗
33. Optimization by simulated annealing10.1126/science.220.4598.671 ↗
34. Global dynamic proteome study of a pellicle-forming Acinetobacter baumannii strain10.1074/mcp.M116.061044 ↗
35. Identification of 7 proteins in sera of RA patients with potential to predict ETA/MTX treatment response10.7150/thno.12403 ↗
36. Micromechanics of surface-grafted hyaluronic acid gels10.1021/jp0272872 ↗
37. Substrate viscosity plays an important role in bacterial adhesion under fluid flow10.1016/j.jcis.2019.05.043 ↗
38. Initial bacterial retention on polydimethylsiloxane of various stiffnesses: The relevance of modulus (mis)match10.1016/j.colsurfb.2022.112709 ↗
39. Characterization of polydimethylsiloxane (PDMS) properties for biomedical micro/nanosystems10.1007/s10544-005-6070-2 ↗
40. Cell-membrane-inspired silicone interfaces that mitigate proinflammatory macrophage activation and bacterial adhesion10.1021/acs.langmuir.8b02292 ↗
41. The DLVO theory in microbial adhesion10.1016/S0927-7765(99)00029-6 ↗
42. Electric double layer interactions in bacterial adhesion to surfaces10.1016/S0167-5729(02)00032-8 ↗
43. Retention of bacteria on a substratum surface with micro-patterned hydrophobicity10.1111/j.1574-6968.2000.tb09249.x ↗
44. Interaction of bi-dispersed particles with contact line in an evaporating colloidal drop10.1039/c1sm06393f ↗
45. Response to comment on “The interaction of cells and bacteria with surfaces structures at the nanoscale”10.1016/j.actbio.2010.12.002 ↗
46. A nanolayer coating on polydimethylsiloxane surfaces enables a mechanistic study of bacterial adhesion influenced by material surface physicochemistry10.1039/C9MH01191A ↗
47. Microfluidic shear assay to distinguish between bacterial adhesion and attachment strength on stiffness-tunable silicone substrates10.1021/acs.langmuir.9b00803 ↗
48. Three-dimensional bacterial motions near a surface investigated by digital holographic microscopy: Effect of surface stiffness10.1021/acs.langmuir.9b02103 ↗
49. Mechanical properties and concentrations of poly(ethylene glycol) in hydrogels and brushes direct the surface transport of Staphylococcus aureus10.1021/acsami.8b18302 ↗
50. Interactions of Staphylococcus aureus with ultrasoft hydrogel biomaterials10.1016/j.biomaterials.2016.04.005 ↗
51. How microbes read the map: Effects of implant topography on bacterial adhesion and biofilm formation10.1016/j.biomaterials.2020.120595 ↗
52. Bacteria/material interfaces: Role of the material and cell wall properties10.1163/016942410X511079 ↗
53. Specific molecular recognition and nonspecific contributions to bacterial interaction forces10.1128/AEM.02839-07 ↗
54. Surface hydration for antifouling and bio-adhesion10.1039/D0SC03690K ↗
55. Surface hydration: Principles and applications toward low-fouling/nonfouling biomaterials10.1016/j.polymer.2010.08.022 ↗
56. Adhesion forces between E. coli bacteria and biomaterial surfaces10.1021/la981104e ↗
57. Impact of chemical heterogeneities of surfaces on colonization by bacteria
58. Busscher, H.J., and van der Mei, H.C. (2012). How do bacteria know they are on a surface and regulate their response to an adhering state?. PLoS Pathog., 8.10.1371/journal.ppat.1002440 ↗
59. Physico-chemistry from initial bacterial adhesion to surface-programmed biofilm growth10.1016/j.cis.2018.10.005 ↗
60. Role of adhesion forces in mechanosensitive channel gating in Staphylococcus aureus adhering to surfaces10.1038/s41522-020-00141-z ↗
61. On the mobility, membrane location and functionality of mechanosensitive channels in Escherichia coli10.1038/srep32709 ↗
62. Stress sigma factor RpoS degradation and translation are sensitive to the state of central metabolism10.1073/pnas.1504639112 ↗
63. The LonA protease regulates biofilm formation, motility, virulence, and the Type VI secretion system in Vibrio cholerae10.1128/JB.00741-15 ↗
64. The Lon protease of Pseudomonas aeruginosa is induced by aminoglycosides and is involved in biofilm formation and motility10.1099/mic.0.2006/002519-0 ↗
65. Multitasking of Hsp70 chaperone in the biogenesis of bacterial functional amyloids10.1038/s42003-018-0056-0 ↗
66. Developmental pathway for biofilm formation in curli-producing Escherichia coli strains: Role of flagella, curli and colanic acid10.1046/j.1462-2920.2000.00128.x ↗
67. Interaction of polymers with amyloidogenic peptides10.1002/pi.5483 ↗
68. Genetic analysis of Escherichia coli biofilm formation: Roles of flagella, motility, chemotaxis and type I pili10.1046/j.1365-2958.1998.01061.x ↗
69. Biogenesis and adhesion of type 1 and P pili10.1016/j.bbagen.2014.04.021 ↗
71. The mechanical world of bacteria10.1016/j.cell.2015.05.005 ↗
72. Endogenous rRNA sequence variation can regulate stress response gene expression and phenotype10.1016/j.celrep.2018.08.093 ↗
73. The CsgA and Lpp proteins of an Escherichia coli O157:H7 strain affect HEp-2 cell invasion, motility, and biofilm formation10.1128/IAI.00949-08 ↗
74. Role of CysE in production of an extracellular signaling molecule in Providencia stuartii and Escherichia coli: Loss of CysE enhances biofilm formation in Escherichia coli10.1128/JB.186.22.7610-7617.2004 ↗
75. Characterization of H/D exchange in type 1 pili by proton-detected solid-state NMR and molecular dynamics simulations10.1007/s10858-019-00247-3 ↗
76. Rangel, D.E., Marín-Medina, N., Castro, J.E., González-Mancera, A., and Forero-Shelton, M. (2013). Observation of bacterial Type I pili extension and contraction under fluid flow. PLoS ONE, 8.10.1371/journal.pone.0065563 ↗
77. The cryoelectron microscopy structure of the Type 1 chaperone-usher pilus rod10.1016/j.str.2017.10.004 ↗
78. Swimming in circles: Motion of bacteria near solid boundaries10.1529/biophysj.105.069401 ↗
79. Self-organization of swimmers drives long-range fluid transport in bacterial colonies10.1038/s41467-019-09818-2 ↗
80. How bacteria respond to material stiffness during attachment: A role of Escherichia coli flagellar motility10.1021/acsami.7b04757 ↗
81. Bacterial competition: Surviving and thriving in the microbial jungle10.1038/nrmicro2259 ↗
82. Floating and tether-coupled adhesion of bacteria to hydrophobic and hydrophilic surfaces10.1021/acs.langmuir.7b04331 ↗
83. Shear-dependent ‘stick-and-roll’ adhesion of type 1 fimbriated Escherichia coli10.1111/j.1365-2958.2004.04226.x ↗
84. Bacterial motility and clustering guided by microcontact printing10.1021/nl903153c ↗
85. Bacteria slingshot more on soft surfaces10.1038/ncomms6541 ↗
86. How bacteria use Type IV pili machinery on surfaces10.1016/j.tim.2015.09.002 ↗
87. PpdD Type IV pilin of Escherichia coli K-12 can be assembled into pili in Pseudomonas aeruginosa10.1128/JB.182.3.848-854.2000 ↗
88. Bacterial motility on a surface: Many ways to a common goal10.1146/annurev.micro.57.030502.091014 ↗
89. Detachment and successive re-attachment of multiple, reversibly-binding tethers result in irreversible bacterial adhesion to surfaces10.1038/s41598-017-04703-8 ↗
90. The PRIDE database resources in 2022: A hub for mass spectrometry-based proteomics evidences10.1093/nar/gkab1038 ↗