journal article·2023-06-01Open access

Analysis of the Effect of Thickness on the Performance of Polymeric Heart Valves

Jingyuan Zhou, Yijing Li, Tao Li, Xiaobao Tian, Yan Xiong, Yu Chen

Abstract

Polymeric heart valves (PHVs) are a promising and more affordable alternative to mechanical heart valves (MHVs) and bioprosthetic heart valves (BHVs). Materials with good durability and biocompatibility used for PHVs have always been the research focus in the field of prosthetic heart valves for many years, and leaflet thickness is a major design parameter for PHVs. The study aims to discuss the relationship between material properties and valve thickness, provided that the basic functions of PHVs are qualified. The fluid−structure interaction (FSI) approach was employed to obtain a more reliable solution of the effective orifice area (EOA), regurgitant fraction (RF), and stress and strain distribution of the valves with different thicknesses under three materials: Carbothane PC−3585A, xSIBS and SIBS−CNTs. This study demonstrates that the smaller elastic modulus of Carbothane PC−3585A allowed for a thicker valve (>0.3 mm) to be produced, while for materials with an elastic modulus higher than that of xSIBS (2.8 MPa), a thickness less than 0.2 mm would be a good attempt to meet the RF standard. What is more, when the elastic modulus is higher than 23.9 MPa, the thickness of the PHV is recommended to be 0.l–0.15 mm. Reducing the RF is one of the directions of PHV optimization in the future. Reducing the thickness and improving other design parameters are reliable means to reduce the RF for materials with high and low elastic modulus, respectively.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Cardiac Valve Diseases and Treatments · Infective Endocarditis Diagnosis and Management · Coronary Interventions and Diagnostics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Applied Mechanics, Sichuan University, Chengdu 610065, China

College of Mechanical Engineering, Sichuan University, Chengdu 610065, China

Funding

National Natural Science Research Foundation of China

References (54)

Show source-provided references
1. Standardized Definition of Structural Valve Degeneration for Surgical and Transcatheter Bioprosthetic Aortic Valves10.1161/CIRCULATIONAHA.117.030729 ↗
2. The optimal management of anti-thrombotic therapy after valve replacement: Certainties and uncertainties10.1093/eurheartj/ehu365 ↗
3. Mechanical considerations for polymeric heart valve development: Biomechanics, materials, design and manufacturing10.1016/j.biomaterials.2019.119493 ↗
4. Rezvova, M.A., Klyshnikov, K.Y., Gritskevich, A.A., and Ovcharenko, E.A. (2023). Polymeric Heart Valves Will Displace Mechanical and Tissue Heart Valves: A New Era for the Medical Devices. Int. J. Mol. Sci., 24.10.3390/ijms24043963 ↗
5. Polymeric heart valves: New materials, emerging hopes10.1016/j.tibtech.2009.03.002 ↗
6. Collagen–hyaluronic acid based interpenetrating polymer networks as tissue engineered heart valve10.1179/1743284715Y.0000000097 ↗
7. In Vitro Durability and Stability Testing of a Novel Polymeric Transcatheter Aortic Valve10.1097/MAT.0000000000000980 ↗
8. Novel Polymeric Valve for Transcatheter Aortic Valve Replacement Applications: In Vitro Hemodynamic Study10.1007/s10439-018-02119-7 ↗
9. Biomechanically Compatible Hydrogel Bioprosthetic Valves10.1021/acs.chemmater.2c01300 ↗
10. Yahya, E.B., Amirul, A.A., H.P.S., A.K., Olaiya, N.G., Iqbal, M.O., Jummaat, F., A.K., A.S., and Adnan, A.S. (2021). Insights into the Role of Biopolymer Aerogel Scaffolds in Tissue Engineering and Regenerative Medicine. Polymers, 13.10.3390/polym13101612 ↗
11. In-vivo assessment of a novel polymer (SIBS) trileaflet heart valve
12. Polyurethane heart valves: Past, present and future10.1586/erd.10.79 ↗
13. Biopolymers and composites: Properties, characterization and their applications in food, medical and pharmaceutical industries10.1016/j.jece.2021.105322 ↗
14. Nanocomposite biomaterial mimicking aortic heart valve leaflet mechanical behaviour10.1177/0954411911399826 ↗
15. A New Nanocomposite Copolymer Based On Functionalised Graphene Oxide for Development of Heart Valves10.1038/s41598-020-62122-8 ↗
16. Investigating the Suitability of Carbon Nanotube Reinforced Polymer in Transcatheter Valve Applications10.1007/s13239-017-0313-2 ↗
17. Rezvova, M.A., Nikishau, P.A., Makarevich, M.I., Glushkova, T.V., Klyshnikov, K.Y., Akentieva, T.N., Efimova, O.S., Nikitin, A.P., Malysheva, V.Y., and Matveeva, V.G. (2022). Biomaterials Based on Carbon Nanotube Nanocomposites of Poly(styrene-b-isobutylene-b-styrene): The Effect of Nanotube Content on the Mechanical Properties, Biocompatibility and Hemocompatibility. Nanomaterials, 12.10.3390/nano12050733 ↗
18. Manufacturing and hydrodynamic assessment of a novel aortic valve made of a new nanocomposite polymer10.1016/j.jbiomech.2012.01.046 ↗
19. Three-dimensional stress analysis of polypropylene leaflets for prosthetic heart valves10.1016/S1350-4533(96)00042-2 ↗
20. Hydrodynamic function of polyurethane prosthetic heart valves: Influences of Young’s modulus and leaflet thickness10.1016/S0142-9612(01)00077-1 ↗
21. Bio-inspired anisotropic polymeric heart valves exhibiting valve-like mechanical and hemodynamic behavior10.1007/s40843-019-1217-4 ↗
22. In vitro hemodynamic assessment of a novel polymeric transcatheter aortic valve10.1016/j.jmbbm.2019.06.016 ↗
23. In Vitro Validation of a Numerical Simulation of Leaflet Kinematics in a Polymeric Aortic Valve Under Physiological Conditions10.1007/s13239-018-0340-7 ↗
24. Design and Analysis of Prosthetic Heart Valves and Assessing the Effects of Leaflet Design on the Mechanical Attributes of the Valves10.3389/fmech.2022.764034 ↗
25. Fluid–Structure Interaction Model of a Percutaneous Aortic Valve: Comparison with an In Vitro Test and Feasibility Study in a Patient-Specific Case10.1007/s10439-015-1429-x ↗
26. Luraghi, G. (2016, January 8–9). Insights from experimental and FSI simulation of a polymeric heart valve. Proceedings of the ESB-ITA Thematic Conference 2016, Palermo, Italy.
27. PulmoStent: In Vitro to In Vivo Evaluation of a Tissue Engineered Endobronchial Stent10.1007/s10439-016-1737-9 ↗
28. Transcatheter Valve-In-Valve Implantation for Failed Balloon-Expandable Transcatheter Aortic Valves10.1016/j.jcin.2012.03.008 ↗
29. Two-dimensional echocardiographic aortic root dimensions in normal children and adults10.1016/0002-9149(89)90430-X ↗
30. A fluid–structure interaction model of the aortic valve with coaptation and compliant aortic root10.1007/s11517-011-0849-5 ↗
31. Impact of modeling fluid–structure interaction in the computational analysis of aortic root biomechanics10.1016/j.medengphy.2013.07.015 ↗
32. Computational comparison of regional stress and deformation characteristics in tricuspid and bicuspid aortic valve leaflets10.1002/cnm.2798 ↗
33. Computational Fluid Dynamics Assessment Associated with Transcatheter Heart Valve Prostheses: A Position Paper of the ISO Working Group10.1007/s13239-018-0349-y ↗
34. Toward Optimization of a Novel Trileaflet Polymeric Prosthetic Heart Valve via Device Thrombogenicity Emulation10.1097/MAT.0b013e31828e4d80 ↗
35. The effect of fundamental curves on geometric orifice and coaptation areas of polymeric heart valves10.1016/j.jmbbm.2020.104039 ↗
36. (2021). LS-DYNA_Manual_Volume_II_R13 LSTC. Material Models, Livermore Software Technology.
37. Hemodynamic and thrombogenic analysis of a trileaflet polymeric valve using a fluid–structure interaction approach10.1016/j.jbiomech.2015.08.009 ↗
38. A deep learning application to approximate the geometric orifice and coaptation areas of the polymeric heart valves under time—Varying transvalvular pressure10.1016/j.jmbbm.2021.104371 ↗
39. In Vitro Evaluation of a Novel Hemodynamically Optimized Trileaflet Polymeric Prosthetic Heart Valve10.1115/1.4023235 ↗
40. Comparative Fluid–Structure Interaction Analysis of Polymeric Transcatheter and Surgical Aortic Valves’ Hemodynamics and Structural Mechanics10.1115/1.4040600 ↗
41. Fluid Mechanics of Artificial Heart Valves10.1111/j.1440-1681.2008.05099.x ↗
42. In silico study of the ageing effect upon aortic valves10.1016/j.jfluidstructs.2021.103258 ↗
43. (2021). Cardiovascular implants-Cardiac valve prostheses-Part 3:Heart valve substitutes implanted by transcatheter techniques (Standard No. ISO 5840-3:2021).
44. Pressure dependent yield criteria for polymers10.1016/0025-5416(74)90179-7 ↗
45. Optimal elastomeric scaffold leaflet shape for pulmonary heart valve leaflet replacement10.1016/j.jbiomech.2012.11.046 ↗
46. Fluid–structure interaction analysis of bioprosthetic heart valves: Significance of arterial wall deformation10.1007/s00466-014-1059-4 ↗
47. Dynamic and fluid–structure interaction simulations of bioprosthetic heart valves using parametric design with T-splines and Fung-type material models10.1007/s00466-015-1166-x ↗
48. Evaluation of an aortic valve prosthesis: Fluid-structure interaction or structural simulation?10.1016/j.jbiomech.2017.04.004 ↗
49. Thinner biological tissues induce leaflet flutter in aortic heart valve replacements10.1073/pnas.2002821117 ↗
50. Fluid-structure interaction of a pulsatile flow with an aortic valve model: A combined experimental and numerical study10.1002/cnm.2945 ↗
51. A framework for designing patient-specific bioprosthetic heart valves using immersogeometric fluid-structure interaction analysis10.1002/cnm.2938 ↗
52. Hemocompatibility and Hemodynamics of Novel Hyaluronan–Polyethylene Materials for Flexible Heart Valve Leaflets10.1007/s13239-013-0171-5 ↗
53. In Vitro Hydrodynamic Assessment of a New Transcatheter Heart Valve Concept (the TRISKELE)10.1007/s12265-016-9722-0 ↗
54. Mechanical degradation of biological heart valve tissue induced by low diameter crimping: An early assessment10.1016/j.jmbbm.2015.01.005 ↗