journal article·2023-03-22Open access

Assessing the Cleanliness of Dental Implants Using Scanning Electron Microscopy and Energy-Dispersive X-ray Spectroscopy Analysis—A SEM and EDS In Vitro Study

Tarek Mtanis, Ameer Biadsee, Zeev Ormianer

Abstract

A wide variety of titanium (Ti) alloy dental implant systems are available and as a result, choosing the correct system has become a challenge. Cleanliness of the dental implant surface affects osseointegration but surface cleanliness may be jeopardized during manufacturing. The purpose of this study was to assess the cleanliness of three implant systems. Fifteen implants per system were examined with scanning electron microscopy to identify and count foreign particles. Particle chemical composition analysis was performed with energy-dispersive X-ray spectroscopy. Particles were categorized according to size and location. Particles on the outer and inner threads were quantitatively compared. A second scan was performed after exposing the implants to room air for 10 min. Carbon, among other elements, was found on the surface of all implant groups. Zimmer Biomet dental implants had higher particle numbers than other brands. Cortex and Keystone dental implants showed similar distribution patterns. The outer surface had higher particle numbers. Cortex dental implants were the cleanest. The change in particle numbers after exposure was not significant (p > 0.05). Conclusion: Most of the implants studied were contaminated. Particle distribution patterns vary with the manufacturer. The wider and outer areas of the implant have a higher probability of contamination.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Oral Rehabilitation, The Maurice and Gabriela Goldschleger School of Dental Medicine, Tel Aviv University, Ramat Aviv, Tel Aviv 6997801, Israel

References (49)

Show source-provided references
1. National Institutes of Health (1988). National Institutes of Health consensus development conference statement: Dental implants. J. Am. Dent. Assoc., 117, 509–513.10.1016/S0002-8177(88)73025-1 ↗
2. Osseointegrated titanium implants. Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man10.3109/17453678108991776 ↗
3. Osseointegration in skeletal reconstruction and rehabilitation: A review
4. “A requiem for the periodontal ligament” revisited
5. Comparative investigation of the surface properties of commercial titanium dental implants. Part I: Chemical composition10.1023/A:1015170625506 ↗
6. Systemic drugs that influence titanium implant osseointegration10.1080/03602532.2016.1277737 ↗
7. Oral implant surfaces: Part 1—Review focusing on topographic and chemical properties of different surfaces and in vivo responses to them
8. Effects of titanium surface topography on bone integration: A systematic review10.1111/j.1600-0501.2009.01775.x ↗
9. The effect of thread pattern upon implant osseointegration10.1111/j.1600-0501.2009.01800.x ↗
10. Factors associated with early and late failure of dental implants10.1111/j.2041-1626.2012.00162.x ↗
11. Role of primary stability for successful osseointegration of dental implants: Factors of influence and evaluation
12. Risk Factors in Early Implant Failure: A Meta-Analysis10.1097/ID.0000000000000386 ↗
13. Surface energy characterization of unalloyed titanium implants10.1002/jbm.820281206 ↗
14. Evaluation of Failed Implants by Metallographic and Energy Dispersive X-ray Analysis10.1097/ID.0000000000000700 ↗
15. Implant surfaces and interface processes10.1177/08959374990130011901 ↗
16. Surface properties determine bioadhesive outcomes: Methods and results10.1002/jbm.820180404 ↗
17. The peri-implantitis: Implant surfaces, microstructure, and physicochemical aspects10.1111/j.1708-8208.2009.00244.x ↗
18. Enhancing surface free energy and hydrophilicity through chemical modification of microstructured titanium implant surfaces10.1002/jbm.a.30518 ↗
19. XPS, AES and SEM analysis of recent dental implants10.1016/j.actbio.2009.01.049 ↗
20. Gudeppu, M., Sawant, S., Chockalingam, C.G., and Timiri Shanmugam, P.S. (2020). Trends in Development of Medical Devices, Elsevier.
21. Effect of cleaning and sterilization on titanium implant surface properties and cellular response10.1016/j.actbio.2011.11.026 ↗
22. (2020, February 22). ASTM F86-13. Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants. Available online: https://www.astm.org/Standards/F86.htm.
23. Marginal Bone Changes on Ultraclean, Micro-Threaded Platform-Switched Implants Following Restoration: 1- to 4-Year Data
24. SEM surface analyses of 120 sterile-packed implants
25. The chemical surface evaluation of black and white porous titanium granules and different commercial dental implants with energy-dispersive x-ray spectroscopy analysis10.1111/cid.12727 ↗
26. Duddeck, D.U., Albrektsson, T., Wennerberg, A., Larsson, C., and Beuer, F. (2019). On the cleanliness of different oral implant systems: A pilot study. J. Clin. Med., 8.10.3390/jcm8091280 ↗
27. Titanium allergy or not? “Impurity” of titanium implant materials10.4236/health.2010.24045 ↗
28. Biomaterial and implant surfaces: On the role of cleanliness, contamination, and preparation procedures10.1002/jbm.820221307 ↗
29. Biological factors contributing to failures of osseointegrated oral implants. (I). Success criteria and epidemiology10.1046/j.0909-8836..t01-2-.x ↗
30. Analysis of failed commercially pure titanium dental implants: A scanning electron microscopy and energy-dispersive spectrometer x-ray study10.1902/jop.2005.76.7.1092 ↗
31. “Peri-Implantitis”: A Complication of a Foreign Body or a Man-Made “Disease”. Facts and Fiction10.1111/cid.12427 ↗
32. The issue of corrosion in dental implants: A review
33. Age-dependent degradation of the protein adsorption capacity of titanium10.1177/0022034509339567 ↗
34. Timiri Shanmugam, P.S., Thangaraju, P., Palani, N., and Sampath, T. (2022). Medical Device Guidelines and Regulations Handbook, Springer International Publishing.10.1007/978-3-030-91855-2 ↗
35. Duddeck, D., Albrektsson, T., and Wennerberg, A. (2019, June 26). CleanImplant Trusted Quality Mark 2017–2018—Guideline and Consensus Paper. Available online: https://www.cleanimplant.com/Awards/implants/.
36. Chemical mapping of teeth in 2D and 3D: X-ray fluorescence reveals hidden details in dentine surrounding fillings10.1016/j.actbio.2020.04.008 ↗
37. Cierech, M., Szerszeń, M., Wojnarowicz, J., Łojkowski, W., Kostrzewa-Janicka, J., and Mierzwińska-Nastalska, E. (2020). Preparation and Characterisation of Poly(methyl metacrylate)-Titanium Dioxide Nanocomposites for Denture Bases. Polymers, 12.10.3390/polym12112655 ↗
38. AlRefeai, M.H., AlHamdan, E.M., Al-Saleh, S., Farooq, I., Abrar, E., Vohra, F., and Abduljabbar, T. (2021). Assessment of bond integrity, durability, and degree of conversion of a calcium fluoride reinforced dentin adhesive. Polymers, 13.10.3390/polym13152418 ↗
39. Scanning Electron Microscopy and Energy-Dispersive X-Ray Spectroscopy as a Valuable Tool to Investigate the Ultra-High-Molecular-Weight Polyethylene Wear Mechanisms and Debris in Hip Implants10.1016/j.arth.2017.07.039 ↗
40. Ebnesajjad, S. (2014). Surface Treatment of Materials for Adhesive Bonding, Elsevier.10.1016/B978-0-323-26435-8.00016-2 ↗
41. Rizo-Gorrita, M., Fernandez-Asian, I., Garcia-de-Frenza, A., Vazquez-Pachon, C., Serrera-Figallo, M.-A., Torres-Lagares, D., and Gutierrez-Perez, J.-L. (2020). Influence of three dental implant surfaces on cell viability and bone behavior. an in vitro and a histometric study in a rabbit model. Appl. Sci., 10.10.3390/app10144790 ↗
42. Quality assessment of five randomly chosen ceramic oral implant systems: Cleanliness, surface topography, and clinical documentation10.11607/jomi.8837 ↗
43. Titanium hydride and hydrogen concentration in acid-etched commercially pure titanium and titanium alloy implants: A comparative analysis of five implant systems10.1111/j.1600-0501.2010.01938.x ↗
44. Al2O3 Particles on Titanium Dental Implant Systems following Sandblasting and Acid-Etching Process10.1155/2019/6318429 ↗
45. Dias, F.J., Fuentes, R., Navarro, P., Weber, B., and Borie, E. (2020). Assessment of the Chemical Composition in Different Dental Implant Types: An Analysis through EDX System. Coatings, 10.10.3390/coatings10090882 ↗
46. Identification card and codification of the chemical and morphological characteristics of 14 dental implant surfaces10.1563/AAID-JOI-D-11-00080 ↗
47. The role of bone debris in early healing adjacent to hydrophilic and hydrophobic implant surfaces in man10.1111/j.1600-0501.2010.02107.x ↗
48. Early bone formation adjacent to rough and turned endosseous implant surfaces. An experimental study in the dog10.1111/j.1600-0501.2004.01082.x ↗
49. Cytocompatibility of pure metals and experimental binary titanium alloys for implant materials10.1016/j.jdent.2013.09.003 ↗